Skip to main content
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Brake Caliper Adapter BMW E92 E93 E91 M3 4.0 V8 1M Porsche 997 380x30 Brake Disc

  • ✓ 380x30 34112284809 / 34112284810 BMW M2 M3 M4 brake disc
  • ✓ 6-piston 997351431 / 997351432 Porsche 997 991 GT3/Turbo brake caliper
  • ✓ front axle

Brake caliper adapter, front axle, on models BMW M E92 E93 E91, etc, for conversion to the Porsche 6-piston brake calipers, combined with the 380x30mm BMW M2 brake discs.

Suitable for following vehicles:

  • BMW E91 M
  • BMW E92 M
  • BMW E93 M
  • BMW M3 4.0 V8
  • BMW 1er M Coupe

Advantages of this brake system:

  • top deceleration, without comparison with conventional brake discs
  • easy assembly
  • better performance
  • supplied material certificate
  • can easily be restored to the original state

Required components:

  • brake caliper: Porsche 997 991 6-piston , reference 997.351.431 left+ 997.351.432 right
  • brake disc: BMW M2 M3 M4 380x30 , reference  34 11 2 284 809 left+ 34 11 2 284 810 right

Delivery:

  • 2x adapter caliper adapters for BMW E92 M E93 M E91 M, etc.
  • complete set of high-strength screws
  • material certificate

Tipps, Infos und Hinweise:

  • Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
  • Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
  • Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden. >> Jetzt direkt zu Spurverbreiterungen nach Wunsch <<
  • Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst. Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Technical data:

Einbauort: vorne
Lochabstand Achsschenkel: 138mm
Lochabstand Bremssattel : 225mm
Einbauort: vorne
Lochabstand Achsschenkel: 138mm
Lochabstand Bremssattel : 225mm

1 of 1 reviews

Average rating of 4 out of 5 stars


0%

100%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


1 April 2020 15:27

Review with rating of 4 out of 5 stars

BOUTIQUE J

perfect product

  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Questions? Click here for the contact form
EBC brake pads Yellowstuff front axle Porsche 911 3.6 GT2 3.6 GT3
  • ✓ Registration-free
  • ✓ Yellowstuff sports surface
  • ✓ temperature up to 900°C

€330.76*
Item number: DP41516R
EBC brake pads Redstuff front axle Porsche 911 3.6 GT2 GT3
  • ✓ Registration-free
  • ✓ Redstuff ceramic covering
  • ✓ temperature up to 750°C

€297.28*
Item number: DP31516C