Brake Caliper Adapter BMW E30 to E34 540i Brake Disc E36 M3 315x28
- ✓ 315x28 34112227171 BMW E36 M3 brake disc
- ✓ 1-piston 34112227516 BMW E36 M3 brake caliper
- ✓ front axle
€223.63*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for front axle of BMW E30 with BMW E36 or E46 wheel hub to install the 315x28 brake discs from E36 M3.
Brake caliper from BMW E36 M3 are required, combined with brake caliper bracket of E34 540i.
Required components:
- brake caliper: BMW E36 M3, Part number: 34112227516
- brake caliper mouting bracket / support: BMW E34 540i
- brake disc: BMW E36 M3 315x28mm original reference: 34112227171
- conversion kit to convert to 5 holes hub (item number 126 in our shop )
Advantages:
- high deceleration
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling.
Delivery:
- 2x brake caliper adapters (see picture)
- 2x spacer plates 12mm
- high-strength mounting screws
- copy of a vehicle document to simplify the registration
- material certificate
rims: at least 17 inch
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
13 November 2019 09:33
Wolfram B
Alles super passt genau
11 February 2021 05:04
Andreas S
Ich finde das super was ihr macht..... weiter so! Verarbeitung ist super ich würde es jedem empfehlen und motivieren einen Umbau mir euren Produkten zu wagen. Die Schrauben für meine Adapter sind schwarz/ nicht gegen rost geschützt. Oder wäre eine zink Beschichtung nicht zugelassen? Eine verlängerte Senkschraube für die Bremsscheibe wäre eine gute Verbesserung. Gruß Andreas
25 February 2021 14:58
Patrik M
Fitment and overall quality excellent!
4 November 2019 13:30
Daniel H
Top bin einfach zufrieden 👍🏻
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: