BMW E36 M3 Brake Caliper Adapter Rear Axle Porsche Rear Brake 328x20
- ✓ 328x20 150342270 BMW E46 M3 brake disc
- ✓ 4-piston 986352422 / 986352421 Porsche 986 brake caliper
- ✓ rear axle
€227.56*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapters for the rear axle of BMW E36 M3 to install the rear brake caliper of Porsche 986, combined with the 328x20mm E46 M3 brake discs.
Thanks to our adapter, the Porsche brake caliper is simply screwed to the original axle instead of the original caliper.
Advantages of this brake system:
- top deceleration, without comparison with conventional brake discs
- easy assembly
- better performance
- supplied material certificate
- can easily be restored to the original state
Required components:
- brake caliper: Porsche 986 rear, reference : 986.352.422 + 986.352.421
- brake disc: BMW E46 M3 rear 328x20mm
Delivery:
- 2x brake caliper adapters for BMW E36 M3
- high strength mounting screws
- material certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
11 June 2018 21:48
Alexander B
Das Produkt passt sehr gut und lässt sich einfach montieren. Jedoch war ich mit dem Ablauf der Bestellung und dem Service nicht zufrieden.
13 January 2021 13:08
Jesper G
Sehr schönes Produkt! Passt perfekt. Empfehlen!
14 January 2021 18:04
Jesper G
sehr schöne und erschwingliche Produkte! 100% Qualität
24 August 2021 23:14
Sandro C
Die Adapter sind perfekt und passgenau.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: