BMW E36 Z3 Performance Brake Caliper Adapter Front
- ✓ 345x28 34112282445 BMW E46 M3 CSL brake disc
- ✓ 6-piston 34116786741 / 34116786742 BMW 135i brake caliper
- ✓ front axle
€208.06*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for the front axle of BMW E36/Z3 to install the BMW Performance 6 piston brake caliper, combined with the 345x28mm E46 M3 brake discs.
The BMW Performance 6 piston calipers are easily installed on the original axle support in place of the original calipers .
Advantages of this brake system:
- top deceleration, without comparaison with conventional brake discs
- easy assembly
- better performance
- supplied material certificate
- can easily be restored to the original state
Required components:
- BMW Performance 6 piston brake caliper from 135i reference left 34116786741 + right 34116786742
- Brake pads from the BMW 135i part no. 34 11 6 786 044
- brake disc from the BMW E46 M3 CSL front axle 345x28mm
Delivery:
- 2x brake caliper adapters for BMW E36
- high strength montage screws
- material certificate
- stress analysis for registration
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can generally not answer, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want. Click here to go to the configurator
>> Configure steel braided brake lines <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
14 January 2020 11:11
Christof H
Bin Sehr zufrieden mit dem Produkt. Super Passgenau und natürlich auch Qualität. Sehr schnell bearbeitet und der Versand hat auch gepasst. Auch bei Fragen sehr schnell geantwortet. Ich werde eich auf alle Fälle weiterempfehlen.
25 October 2016 16:58
krigman16v
Alles super!!
12 January 2024 11:48
deco-rator
Many thanks
30 September 2017 23:31
gerapgepana
Good product! excellent seller! Thanks!
10 February 2019 11:48
richiekb1984
Excellent thank you very much very fast delivery !!!
15 July 2023 19:20
Christian K
Hohe Qualität Saubere Verarbeitung Guter Online-Shop und Beratung Gerne wieder!:)
7 March 2017 15:51
merlin_2511
Gutes Preisleistungsverhältnis, schneller Versand, vielen Dank
14 February 2022 09:22
Christian F
Verarbeitung und Qualität sind alles 1 Klasse! Der Service dem man beim Kauf mit bekommt ist genauso gut. Ich würde die Firma immer wieder empfehlen.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
| Motor | Motorcode |
|---|---|
| 316i | E36|100PS(73KW) |
| 316i | E36|102PS(75KW) |
| 325td | E36|115PS(85KW) |
| 318i | E36|113PS(83KW) |
| 318is | E36|140PS(103KW) |
| 323i | E36|170PS(125KW) |
| 318i | E36|115PS(85KW) |
| 323i 2.5 | E36|170PS(125KW) |
| 328i | E36|193PS(142KW) |
| 320i | E36|150PS(110KW) |
| 325i | E36|192PS(141KW) |
| Motor | Motorcode |
|---|---|
| 323i | E36|170PS(125KW) |
| 318i | E36|115PS(85KW) |
| 328i | E36|193PS(142KW) |
| 325i | E36|192PS(141KW) |
| 320i | E36|150PS(110KW) |
| Motor | Motorcode |
|---|---|
| 316i | E36|102PS(75KW) |
| 320i | E36|150PS(110KW) |
| 318i | E36|116PS(85KW) |
| 328i | E36|193PS(142KW) |
| 323i | E36|170PS(125KW) |
| Motor | Motorcode |
|---|---|
| 318 Ti | E36|140PS(103KW) |
| 316i | E36|105PS(77KW) |
| 316i | E36|102PS(75KW) |
| 323 Ti | E36|170PS(125KW) |
| 316g | E36|102PS(75KW) |
| Motor | Motorcode |
|---|---|
| 1.8i | E36|116PS(85KW) |
| 2.2i | E36|170PS(125KW) |
| 2.0i | E36|150PS(110KW) |
| 3.0i | E36|231PS(170KW) |
| 1.9i | E36|118PS(87KW) |
| 1.9i | E36|140PS(103KW) |
| 2.8i | E36|193PS(142KW) |
| 1.9i | E36|116PS(85KW) |
| Motor | Motorcode |
|---|---|
| 316i | E36|100PS(73KW) |
| 316i | E36|102PS(75KW) |
| 325td | E36|115PS(85KW) |
| 318i | E36|113PS(83KW) |
| 318is | E36|140PS(103KW) |
| 323i | E36|170PS(125KW) |
| 318i | E36|115PS(85KW) |
| 323i 2.5 | E36|170PS(125KW) |
| 328i | E36|193PS(142KW) |
| 320i | E36|150PS(110KW) |
| 325i | E36|192PS(141KW) |
| Motor | Motorcode |
|---|---|
| 323i | E36|170PS(125KW) |
| 318i | E36|115PS(85KW) |
| 328i | E36|193PS(142KW) |
| 325i | E36|192PS(141KW) |
| 320i | E36|150PS(110KW) |
| Motor | Motorcode |
|---|---|
| 316i | E36|102PS(75KW) |
| 320i | E36|150PS(110KW) |
| 318i | E36|116PS(85KW) |
| 328i | E36|193PS(142KW) |
| 323i | E36|170PS(125KW) |
| Motor | Motorcode |
|---|---|
| 318 Ti | E36|140PS(103KW) |
| 316i | E36|105PS(77KW) |
| 316i | E36|102PS(75KW) |
| 323 Ti | E36|170PS(125KW) |
| 316g | E36|102PS(75KW) |
| Motor | Motorcode |
|---|---|
| 1.8i | E36|116PS(85KW) |
| 2.2i | E36|170PS(125KW) |
| 2.0i | E36|150PS(110KW) |
| 3.0i | E36|231PS(170KW) |
| 1.9i | E36|118PS(87KW) |
| 1.9i | E36|140PS(103KW) |
| 2.8i | E36|193PS(142KW) |
| 1.9i | E36|116PS(85KW) |
- ✓ 345x28 34112282445 BMW E46 M3 CSL brake disc
- ✓ 6-piston 34116786741 135i
- ✓ front axle
- ✓ 380x30 34112284809 / 34112284810 BMW M2 / 3 / 4 brake disc
- ✓ 4-piston 34116799469 / 34116799470 BMW F30 / 31 brake caliper
- ✓ front axle
- ✓ 345x28 150342270 BMW E46 M3 CSL brake discs
- ✓ 4-piston 996351425 / 996351426 Porsche Boxter S brake caliper
- ✓ front axle
- ✓ Two-piece design
- ✓ different thicknesses
- ✓ many diameters
- ✓ M52 & M54 engines
- ✓ 228 & 240 coupling
- ✓ lightens 5.8 kg
- ✓ M50 engines
- ✓ 228 coupling
- ✓ lightens 6.6 kg
- ✓ M40 & M42 engines
- ✓ 210 coupling
- ✓ lightens 4.8 kg
- ✓ Ignition coil
- ✓ BMW E30, E36, Z3, M42, M44
- ✓ Bremi part number: 1748017
- ✓
- ✓ excellent fit
- ✓ front right / rear left BMW E36 / Z3
- ✓ high stability
- ✓ BMW E36, E46
- ✓ 325i,320i,316
- ✓ simple turbo conversion
- ✓ Suitable for all M50 M52 S50 and S52 engines
- ✓ High-strength aluminum
- ✓ Made in Germany
- ✓ excellent fit
- ✓ front right / rear left BMW E36 / Z3
- ✓ high stability
- ✓ 5x120 bolt circle
- ✓ Plug & Play
- ✓ BMW E30
- ✓ BMW M50 engine
- ✓ 600NM torque
- ✓ hub profile: 23x29-10N
- ✓ excellent fit
- ✓ rear axle BMW E36
- ✓ high stability
- ✓ Ignition coil coil on plug
- ✓ Adapter plate for BMW E30, E36, Z3, M42, M44
- ✓ enormous time savings
- ✓ clutch pin, clutch locking bolt
- ✓ BMW E30 E46 E81 E88 and much more
- ✓ high durability
- ✓ BMW E30, E36, Z3
- ✓ M30 M5 engine
- ✓ easy engine conversion
- ✓ excellent fit
- ✓ rear axle BMW E36
- ✓ high stability
- ✓ Rear axle adjustment suitable for BMW E36 E46 and Z4