BMW E30 E32 740i Rear Brake Caliper Adapter with 294 x19 Disc Brake System
- ✓ 294x19 34211165 563 BMW E46 328i brake disc
- ✓ 1-piston 34211160399 / 34211160400 BMW E32 740i 40 / 20 brake caliper
- ✓ rear axle
€183.19*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for BMW E30 rear axle to install the large E32 rear brake caliper, combined with the BMW E46 328i brake disc , 294x19 mm. Including corresponding O-rings.
Rims: at least 16 inch.
Required components:
- Rear brake discs BMW E46 328i with 294x19 mm part no: 34 21 1 165 563
- Rear brake calipers BMW E32 740i 40/20 part no: 34 21 1 160 399 part no: 34 21 1 160 400
the following modification is necessary for the conversion
- PCD modification from 5x120 to 4x100
Advantages of this brake system:
- high deceleration
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Delivery:
- 2x brake caliper adapters (see picture)
- complete mounting screws set
- 2x corresponding O-rings.
- cop of vehicle documents to simplify the registration
- material certificate
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can not answer generally, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want.
Click here to go to the >> configure steel braided brake lines << - Always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
11 May 2020 11:48
meister.m3
schnelle Lieferung
2 June 2020 17:31
berger0852
alles gut gelaufen
27 February 2018 10:33
polluxpower
Alles top und super schnell,gerne wieder!
31 July 2018 08:57
kevin89_kevin
Alles Top schnelle Lieferung!
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 294x19
- ✓ 75mm centering
- ✓ 60mm height
- ✓ 312x25 8N0615301A Audi S3 / Golf 4 GTI brake disc
- ✓ 1-piston 34111160365 (casting number 243) 34111160363/364 casting number 60/28/302 BMW E34 540i brake caliper
- ✓ front axle
- ✓ 315x28 34112227171 BMW E36 M3 brake disc
- ✓ 1-piston 34112227516 BMW E36 M3 brake caliper
- ✓ front axle
- ✓ 294x19
- ✓ 75mm centering
- ✓ 60mm height
- ✓ 294x19
- ✓ 75mm centering
- ✓ 60mm height
- ✓ 284x22 46403958 Fiat Coupe brake disc
- ✓ 1-piston 34111160346 / 34111160345 BMW E36 brake caliper
- ✓ front axle
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ 294x19
- ✓ 75mm centering
- ✓ 60mm height
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Brake force regulator Infinitely variable
- ✓ Perfectly adjustable braking effect
- ✓ suitable for all vehicles
- ✓ 294x18.9
- ✓ 75mm centering
- ✓ 59.7mm height
- ✓ excellent fit
- ✓ rear axle BMW E36
- ✓ high stability