Audi S6 A6 C5 Passat V8 A8 Brake disc transformation Brake caliper adapter Rear axle brake adapter 310x22
- ✓ 310x22 240122-02121 A8 brake disc
- ✓ original brake caliper
- ✓ rear axle
€144.89*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter to mount brake discs 310x22mm on the rear axle Audi A8 in connection with the original brake calipers.
Suitable for all:
- Audi A6/ S6 C5 (Type 4B) year of manufacture 1997-2004.
- VW Passat B5 Type 3B
- not suitable for the C5 2.7T, 2.7T four-wheel drive, V8 four-wheel drive, or RS6
When converting to the larger A8 brake discs, the braking performance is significantly increased due to the efficiency and better cooling of the brake discs. Another advantage is that the brake discs of the A8 cost almost half compared to the original 269x22 brake discs. Thus, our holders have already paid for themselves after the first brake conversion.
With this conversion, 17 inch rims can still be retained.
Required components:
- A8 brake discs 310x22 (ATE No: 24.0122-0212.1)
Advantages:
- Extreme deceleration values also in connection with our rear axle brake system
- The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles
- Directly suitable for the models mentioned above and can therefore be restored to the original condition at any time without any problems
- Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling.
Delivery:
- 2x brake caliper holder (see picture)
- high-strength screw material
- materials certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
24 September 2019 10:25
- S
Perfekte Ware und super Abwicklung. Anstandslose Kulanz und netter Kontakt. Geliefert wurden leider falsche schrauben wodurch das Gewinde im Halter beschädigt wurde. Angerufen, zurück geschickt und umgehend Ersatz erhalten. Perfekt !!! Ich bin sehr zu frieden!!!
30 January 2020 11:48
Marcel F
Verarbeitung ist Top. Passgenauigkeit ebenso. Lediglich eine kurze Einbauanleitung in Papierform wäre wünschenswert.
31 January 2020 20:02
Marcel F
Verarbeitung ist Top. Passgenauigkeit ebenso. Lediglich eine kurze Einbauanleitung in Papierform wäre wünschenswert.
24 September 2019 22:35
- S
Klasse Umbau Teile. Bin sehr zufrieden. Auch der Service ist klasse. Danke hierfür
16 December 2020 08:03
EFRAIN R
The quality is outstanding, the only drawback is that it took ages to arrive.
16 December 2020 10:15
Bert S
Schnelle Lieferung, alles sauber gepasst, Fahrzeugbesitzer glücklich
24 June 2021 21:09
Alex C
Ich muss sagen das warten hat sich gelohnt Super Qualität, Material und die Passgenauigkeit ist der Hammer 👌🏻 Wenn Man den Support angeschrieben hat hat man binnen kürzester Zeit eine Antwort bekommen Danke dem ganzen Team Kann ich nur empfehlen und würde wieder hier was kaufen 💪🏻
3 December 2021 19:21
Matthias K
Alles tip top io.. verarbeitung und Qualität sind absolut io.. Beratung am Telefon und per Mail sind mega Top.Versand und Lieferzeit sind einwandfrei. Bin sehr zufrieden!
19 July 2023 05:13
Marcus K
Super passgenau. Alles wie beschrieben. Sehr guter Service. Jederzeit wieder. Danke.
4 October 2020 12:31
Patrick G
Habe erstmal nur 4 Sterne gegeben da ich den Adapter noch nicht montiert habe jedoch ging der Versand sehr schnell, die Schrauben waren alle dabei sowie die Bestellung als Gast als auch das Downloaden des Gutachtens ging super einfach.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ 310x22
- ✓ 68mm centering
- ✓ 42mm height
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 310x22
- ✓ 68mm centering
- ✓ 42mm height
- ✓ 310x22
- ✓ 68mm centering
- ✓ 42mm height
- ✓ 310x22
- ✓ 68mm centering
- ✓ 42mm height
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ Brake force regulator Infinitely variable
- ✓ Perfectly adjustable braking effect
- ✓ suitable for all vehicles
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ 310x22
- ✓ 68mm centering
- ✓ 42mm height
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
