Audi S2 brake caliper adapter rear axle 302x12 brake disc brake system conversion
- ✓ 302x12 240112-01761 A6 brake disc
- ✓ original Audi S2b Coupe brake caliper
- ✓ rear axle
€151.11*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter to mount 302x12mm brake discs on the rear axle of the Audi S2 Coupe (not suitable for Avant and Limo) and identically constructed rear axles Audi A6.
With our adapters, the original Audi S2 Coupe brake calipers on the rear axle can be retained. The brake caliper carrier must be minimally processed with a file (0.5-0.7 mm) on the inside dimension where the disc runs!
Required components:
A6 brake discs from all-wheel drive 302x12mm is the exact part number: 24.0112-0176.1 412176
Advantages of this brake system:
- Extreme deceleration values also in connection with our front axle brake system
- The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles
- Directly suitable for the models mentioned above and can therefore be restored to the original condition at any time without any problems
Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling.
We also offer a suitable brake system for the front axle. Have a look in our shop!
Scope of delivery:
- 2x brake caliper(see picture)
- Installation instructions
- high-strength screw material
- material certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Login
28 February 2019 12:42
Benjamin K
Passt so wie beschrieben!! Klasse
2 December 2024 22:55
toxic_mark
Super, alles bestens, gerne wieder!
26 September 2016 08:12
evolution_91
Alles Bestens
28 December 2025 20:42
reicturmark
Order delivered on time with no issues
- Which brake pads should be used?
The original brake pads from the brake caliper, which is required for our conversion kit, must always be used.
- Can I use other brake calipers as indicated in the required components?
No, unfortunately that is not possible, the reason being that all brake calipers have different height and depth measurements. If another brake disc is installed, the brake caliper would either not fit the adapter at all or not run centrally to the brake disc. If you want to install a different brake caliper, we also have an option for you. You can have a custom-made product manufactured, check out the following link for more information:
- Can I also use other discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply that all brake calipers have different height and depth measurements. If a different brake disc is installed, the brake caliper would either not fit on the adapter at all or would not be centered with the brake disc. However, if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product produced, have a look at the following link for more information:
https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
| Motor | Motorcode |
|---|---|
| S2 quattro | B4|230PS(169KW) |
| S2 quattro | 8C2|230PS(169KW) |
| S2 quattro | 8C|230PS(169KW) |
| Motor | Motorcode |
|---|---|
| S2 quattro | 8B3|220PS(162KW) |
| S2 quattro | 8B3|230PS(169KW) |
| S2 quattro | 89|230PS(169KW) |
| S2 quattro | 89|220PS(162KW) |
| Motor | Motorcode |
|---|---|
| S2 quattro | B4|230PS(169KW) |
| S2 quattro | 8C2|230PS(169KW) |
| S2 quattro | 8C|230PS(169KW) |
| Motor | Motorcode |
|---|---|
| S2 quattro | 8B3|220PS(162KW) |
| S2 quattro | 8B3|230PS(169KW) |
| S2 quattro | 89|230PS(169KW) |
| S2 quattro | 89|220PS(162KW) |
- ✓ 360x34 3D0615301M Audi A6 / VW Phaeton brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne ZR18 ZL18 brake caliper
- ✓ front axle
- ✓ 345x30 4D0615301B Audi S8 brake disc
- ✓ 4-piston 7L6615123R / 7L6615149A VW Touareg 7L V6 BM5 brake caliper
- ✓ front axle
- ✓ 323x30 4D0 615 301A Audi A8 brake disc
- ✓ 4-piston 993351425 993351426 Porsche 993 Big Red brake calipers
- ✓ front axle
- ✓ 345x30 4D0615301B Audi S8 brake disc
- ✓ 4-piston 996351429 / 996351430 Porsche 996/GT3 brake caliper
- ✓ front axle
- ✓ 360x34
- ✓ 68mm centering
- ✓ 60mm height
- ✓ 360x34 3D0615301M Audi A6 / VW Phaeton brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne ZR18 ZL18 brake caliper
- ✓ front axle
- ✓ 2.2 20V Quattro engines
- ✓ 240 clutch
- ✓ lightens 7.1 kg
- ✓ VW Golf 4 1.8T GTI engine
- ✓ 600NM torque
- ✓ hub profile: 21.8x24.2-23N
- ✓ excellent fit
- ✓ rear axle Audi RS4 / RS2 / A4
- ✓ high stability
- ✓ Audi 80 B4
- ✓ 1.8T engine from the Audi A4 B5, Audi A6, VW Passat 3B
- ✓ Torque arm from ABK motor, viscous fan must be removed
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ Audi 80 S2
- ✓ 6mm thick
- ✓ high strength screws
- ✓ 5 cylinder 20V, 2.5L diesel block
- ✓ Audi S2 RS2
- ✓ 01E 6-speed gearbox from 01E 6-speed gearbox
- ✓ simple gearbox conversion
- ✓ 302x12 4F0615601G Audi A6 brake disc
- ✓ 1-piston 853615423 / 853615424 Audi S2 Coupe brake caliper
- ✓ rear axle
- ✓ Reinforced version
- ✓ Audi 80 8C B4 90 B3
- ✓ 775mm diameter
- ✓ 345x30 4D0615301B Audi S8 brake disc
- ✓ 4-piston 8J0615107 / 8J0615108 Audi TTRS / RS3 brake caliper
- ✓ front axle