Audi S2 Coupe 80 90 Avant 80 Quattro Wheel Hub with 5x112 Bolt Circle/ Pitch Diameter Circle Front Axle
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ Audi 80 S2
€174.10*
- 30 days money back guarantee
- shipping within 24h
- 15 years expert knowledge
- 2 years warranty
Wheel hubs for conversion to 5x112 bolt circle/ pitch diameter circle (pdc) - front axle on models Audi 80 / 90. Series with an 82 wheel bearing diameter at the front axle, combined with the Audi S2 brake.
The wheel hubs can be installed plug and play on your Audi 80/90 series and you can also take over the Audi S2 brake directly without an adapter or anything else..
Since it is impossible to re-drill the original wheel hub (overall diameter too small), we have included these special wheel hubs in our shop. Now rims with 5x112 bolt circle can finally be used without to need for adapter plates.
Also perfectly suitable for all Audi 80 S2 as a spare part, since the hubs are neither offered by Audi nor in the accessories.
Advantages:
- 5x112 rims can be used without the installation of plates or spacers
- 100% fitting
- completely galvanized, therefore best corrosion protection
- The 5x112mm wheel hubs are equipped with M14x1.5 thread. So the Audi and VW rims can be taken over with the original wheel bolts
- not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
Delivery:
- 2x whell hubs, 5 x 112 bolt circle/ pitch diameter circle, M14x1,5 thread, suitable for Audi 80 / 90. Series with an 82 wheel bearing diameter
- material certificate
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
8 March 2020 09:52
Swen Joachim V
Super Qualität, ich hätte mir nur gewünscht, dass das Materialzertifikat gleich dabei gewesen wäre. Aber sonst reibungsloser Ablauf, sehr zufrieden. Gruß S-J. Vöge
15 April 2020 20:59
Thomas S
Sehr gute Qualität und passgenau. Evtl. Höhere Stärke für Rally Fahrzeuge wäre wünschenswert.
15 November 2020 09:50
Sébastien L
Montage simple et plug and play sur une Audi 80 cab v6 Aucune modification à part les freins
18 February 2022 09:14
Swen Joachim V
Schnelle unkomplizierte Abwickulung. Sehr schnelle Liefrung bei verfügbaren Artikeln. Passgenaue Montage am Fahrzeug. Positive Erfahrungen aus den letzten Käufen! Produktpalette für Motor/Getriebhalterung erweitern (Motor-Swap)
29 November 2020 19:37
Sébastien L
Montage sinople et comme à l origine. Cest top !
2 January 2020 22:15
audi-rsii-coupe
Excellent!!
9 February 2020 22:15
road-runner70
alles bestens, gerne wieder, TOP
9 February 2020 09:10
Kinnen M
Wass soll mann Sagen Passt 👍
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems