Wheel Spacer PCD Adapter Plate VW Golf 4x100 5x130 to Porsche 20mm Track Adapter
- ✓ 4x100 to 5x130
- ✓ 20mm per side
- ✓ 57.1 ->71.6 centering
€136.56*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
High-strength wheel spacer / PCD Adapter suitable for all VW with PCD 4x100 and hub centric 57,10mm.
Thanks to this adapter, all Porsche rims, which are compatible with a 5x130mm PCD, can be mounted.
- enlargement per wheel: 20mm
- enlargement per axle: 40mm
- internal hubcentric: 57,10mm
- external hubcentric Porsche: 71,60mm
- screw thread on adapter: M14 x 1,5
All components are made of high quality aluminum. All screws provided are high-strength (10.9).
In the installation instructions, you see how the whole thing is mounted. (click here)
Due to the TÜV certificate (technical report) included in the scope of delivery, a registration can be carried out by individual acceptance.
Delivery:
- 2x adapters / spacers for one axle
- complete mounting screws set (10.9)
- TÜV - certificate for registration
- Installation instructions
This offer is only for one axle. For complete equipment of your vehicle, order, please, 2 times. The item is also available with the thickness of your choice. You can thus compose the kit to the required thickness.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
29 February 2020 10:28
Robert B
Der Artikel ist passgenau und auch das Eintragen beim TÜV war kein Problem
15 August 2018 19:18
Maik D
Meine Bestellten Artikel haben super gepasst. Würde immer wieder bei Epytec bestellen.
31 July 2018 13:21
David F
Wie gewohnt, gute Qualität von euch
6 June 2020 23:30
Andre B
Es passt alles super und es ist eine top Qualität. Ich kann es nur weiterempfehlen!!!
17 June 2020 07:15
Andre B
Es gibt nur zwei Hersteller die 20 Adapterplatten mit Prüfzeugnis herstellen. Eine super Verarbeitung aber man könnte die Radbolzen mit in den Lieferumfang nehmen und ganz wichtig alle Materialzertifikate zum Produkt mit beilegen und nicht zum Download machen. Denn die Abnahmen werden immer Komplizierter und wenn man dann alles im Netzwerk suchen muss nervt das gewaltig. Habe gerade das Problem. Wenn diese Dinge behoben werden kann man jedem eure Produkte empfehlen. Sonst ist es eine Super Verarbeitung und passgenau und super zu Verarbeiten.
12 August 2018 21:37
Björn O
Super Verarbeitung... super Support... einfach nur komplett zu empfehlen...
4 February 2021 06:33
Peter W
Hat alles sehr gut geklappt,das Artikel ist wie beschrieben 👍🏻👍🏻
10 February 2021 22:42
Peter W
Hat alles sehr gut geklappt,das Artikel ist wie beschrieben 👍🏻👍🏻
13 September 2018 09:33
Florian D
Top Produkt .Super passgenau und hervorragende Qualität .
30 June 2021 23:10
Raphael F
Top Ware hat super gepasst 👍
- Which wheel bolts do I have to use for the bolt circle adapters that I have ordered from you?
We provide screws for screwing the LK adapter onto the hubs. We don't have wheel bolts. The reason is that each rim needs different wheel bolts. So we cannot cover all types of rims. Therefore, you always have to get these yourself (see information from the rim manufacturer)
- With which torque are our Epytec bolt circle adapters screwed tight?
To attach the bolt circle adapters to the wheel hub, the same torque is used as original, this is usually between 120 and 140NM.
If you are not sure, it must be asked at the vehicle manufacturer.
The rim is always attached to the bolt circle adapter with the torque that the rim manufacturer specifies. There is a data sheet for each rim, which specifies the tightening torque.
If the data sheet is no longer available, the values must be requested from the rim manufacturer.
- ✓ Quick assembly
- ✓ delivered ready to install
- ✓ great safety
- ✓ to configure yourself
- ✓ with TÜV certificate
- ✓ best quality
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints VR6 or G60 coarse teeth
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints VR6 or G60
- ✓ rear axle
- ✓ Golf 2 Syncro Golf 3 Syncro 4 motion
- ✓ External joints G60 or VR6 fine toothing
