Thin 1cm shorter drive shaft on the right front Audi A3 Sportback Q3 VW Golf MK5 MK6 4-motion Passat 3c Skoda

✓ Front axle right
✓ VW Golf IV Variant Bora Variant Audi A3 Skoda Octavia I Combi Seat Leon Seat Toledo II
✓ Free of registration

€308.31*

Available

Product number: APA201

Delivery by Monday, 25.11.2024 if you order within the next 22 Hours.

Repeated order: check settings carefully and change if necessary.

Chassis number

maximum characters = 18, rest = 18

Price calculation

Pricebox
Name	Title	Surcharge
Chassis number:

Your Price:

% €308.31 * €308.31 * ( 0% saved )

rounded up to minimum price

Prices incl. VAT plus shipping costs

* Configuration is incomplete - please check it!

Product number: APA201

Weight: 8.8 kg

Einbauort: vorne

Your benefits

30 days money back guarantee
shipping within 24h
15 years expert knowledge
2 years warranty

1 cm shorter and thinner drive shaft for many VW, Audi and Skoda models. Absolutely necessary when lowering! The shaft is made of high-strength steel and manufactured in one piece and is a complete drive shaft. Thus also suitable for high-performance engines.

Thanks to our thin and extremely stable transmission / drive shaft, you avoid many problems at the body that usually appear during a chassis lowering.

It is important that when installing the new drive shaft, there is no overpressure in the sleeve. In our installation instructions you can see how you can prevent this (Click here)

By installing the thinner drive shaft, you save yourself reworking the body. That saves you time and nerves.

Important!! Our short and thin drive shaft is only suitable if the dimension from the wheel center to the original fender edge is 31.5cm or smaller. If this distance is higher, the shaft is too short for your vehicle.

This is how you measure the distance from the fender edge to the wheel center:

/814-165769-bremssatteladapapter-vw-t5-t6-bus-adapter-365x34-bremsscheibe-audi-rs5-r8-bremssattel-8-kolben--13-.jpeg

Technical data:

Criterion	Detail
assembly side	front axle right
length	595 mm
drilling-Ø	10.5 mm
thread	M16x1.5
external toothing wheel side	36
seal ring diameter	59.5 mm
number of drill holes	6
PCD-Ø	94 mm
chassis	for vehicles with low-profile chassis
for shaft diameter	30.5 mm
joint diameter wheel side	98 mm
joint diameter differential side	108 mm

Delivery:

1x thin and 1 cm shorter drive shaft / solid shaft including joint kit / axle joints for Audi A3, Sportback, Q3, VW Golf MK5, MK6, 4-motion, Passat 3c, Skoda Octavia 2, 3 Combi, Superb II

Our drive shafts are registration-free and therefore do not have to be registered

Technical data:

Einbauort: vorne

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

Simply use your social account to log in to our shop. In a few steps you are logged in and can complete your account!

I have read the privacy policy and agree to it

No reviews found. Share your insights with others.

What exactly is the point of having a shorter driveshaft?
As a result of lowering, the axle geometry changes and the shaft presses against the wheel bearing, exposing it to high levels of wear and, in the worst case, destroying it. It is therefore imperative to depressurize the component. This is done by shortening the trees.
Do reinforced driveshafts also have reinforced ball joints ?
The wheel-side ball joints are also reinforced, but the inner ball joints are like the standard ball joints.
Why are two bags of grease included in the delivery?
The grease is included in the scope of delivery so that it can be regreased or if the gearbox flange is open at the rear. In this case, grease must still be applied there. If the shaft is supplied completely closed, no grease is required, as this has already been done.
Why are no shims (OE: 1K0407357D) for the mounting supplied as they are original?
We do not supply the shims, as we install the latest version of the bellows. With these, the shims are no longer required.

Questions? Click here for the contact form