Gesucht nach Seat | Ibiza IV | 1.4 TDi | 6J5, 6P1

Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9

• ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
• ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle

• ✓ wheel offset plates for rear axle
• ✓ track extension by 10 mm per side
• ✓ for VW Polo 6R Polo 9n Audi A1 Seat Ibiza IV V 

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ camber and track correction / adjustement plates for installation on rear axle. Thanks to this plate you can modify the camber of the rear wheel, negative or positive.

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 11m
• ✓ bottom length: 30mm
• ✓ top length: 21mm
• ✓ width: 24mm

• ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection

• ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D

• ✓ Zimmermann Sport brake disc 360x32 Manufacturer's ref.  100.3347.70 / 100.3348.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapters article 940, article 808 and article 830 
• ✓ Audi A4 Avant RS4 quattro

• ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston

• ✓ 1x bent curved fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 7m
• ✓ bottom length: 20mm
• ✓ top length: 23mm
• ✓ width: 18mm

• ✓ eccentric for article 590 galvanized

Hexagonal nut M08
Thread right
Galvanized

• ✓ eccentric for article 244, galvanized

• ✓ 2x drive shaft adapters for VW Golf MK1

• ✓ gift voucher 50 Euro

• ✓ spacing plate / bush / bushing for brake caliper adapter

• ✓ hexagon nut: M10
• ✓ thread: right
• ✓ material: stainless steel

• ✓ Gift Voucher 30 Euro

• ✓ Gift Voucher 100 Euro

• ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line

• ✓ Joint set for the 6-speed 02M 02Q transmission
• ✓ Also suitable for our drive shafts for the 02M 02Q transmission

• ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
• ✓ Golf 4 R32

• ✓ Zimmermann brake disc 370x32 Manufacturer's ref.  100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
  
• ✓ Audi TT
• ✓ Seat Leon

• ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
• ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire

• ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
• ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
• ✓ original brake calipers with carrier for handbrake from Golf 4 R32
• ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D

• ✓ Zimmermann sports brake disc 350x32 Manufacturer's ref. 400.3649.52 with hub bore turned up to 68mm, suitable for our brake caliper adapters article 928 and article 929
• ✓ Mercedes M-Klasse R-Klasse GL-Klasse VR6 R32 S3

Hexagonal coupling nut M8x30
Thread right
Galvanized

• ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection

• ✓ 1x straight fixation for steel braided brake line with rubber
• ✓ top hole: 8mm
• ✓ bottom hole 11m
• ✓ Width: 24mm
• ✓ Height: 47mm

• ✓ assembly position: rear
• ✓ suitable for Audi A6 Avant 3.0 quattro

• ✓ assembly position: rear
• ✓ suitable for Audi Seat Skoda VW A3 A6 Avant Leon 1.6 1.8 1.9 TDI

Hexagonal coupling nut M8x30
Thread right
Galvanized

Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized

Zinc-plated press-in nut M06 with right hand thread