Brake systems KIT rear axle Golf 5 6 Audi A1 A3 Porsche Cayenne 4-piston caliper VW Golf 5R 6R handbrake caliper 356x22 brake disc
- ✓ 356x22 4H0615601F Audi A6 A7 brake disc
- ✓ 4-piston 996352421 / 996352422 Porsche Cayenne brake caliper
- ✓ rear axle
€1,584.95*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
With our high-performance brake system kit for theGolf 5, 6, Audi A1, A3 series and many other cars, you can convert your rear axle to a 4-piston brake system in conjunction with the VW Golf 5R/ 6R handbrake caliper and achieve ideal performance.
With this high performance brake system kit you can drive the Porsche Cayenne 4-piston Brembo brake calipers and the VW Golf 5R/6R handbrake caliper in combination with the 356x22 mm brake discs from the Audi A6 A7 on the Golf 5, 6, Audi A1, A3 series and many other cars.
Another advantage of our brake system kit is that it is equipped with the same original brake calipers and brake discs that are also installed in series-production cars. These OE parts not only make the replacement of the brakes simple and uncomplicated, but also facilitate the registration with the TÜV.
The brake system kit is not only sporty, but also suitable for everyday use and, thanks to the perforated sports brake discs in conjunction with our ceramic lining, enables ideal performance while reducing brake dust, temperature and abraison.
With this high-performance brake kit you can get started straight away and have everything you need to convert your rear axle to a 4-piston brake system.
The high-performance brake kit is suitable for the following cars with alloy steering knuckles (OE: 1k0505433/1k0505434)
- Audi A1 (8X)
- Audi A3 (8P)
- VW Golf V (1K)
- VW Golf VI (5K)
- VW Golf Variant V (1K)
- VW Golf Variant VI (5K)
- Seat Altea (5P)
- Skoda Octavia (1Z)
- Skoda Octavia (5E)
- Skoda Superb (3T)
Advantages of this brake system:
- our components, such as brake callipers and brake discs, come from series-production cars and are OE parts. This makes replacing the brakes simple and uncomplicated and facilitates registration with the TÜV.
- The material certificate included in the scope of delivery enables registration by individual acceptance even for series-production cars.
- High-performance brake pads with longer service life than the original pads
- extreme deceleration values also in combination with our rear axle brake system
- directly fitting to the above mentioned models and therefore easily rebuildable to original condition at any time
- our EPYTEC brake caliper adapters require no sending in of your stock parts, no re-welding, re-milling or re-drilling.
Note:
- the kit includes new brake calipers with Epytec logo as standard. For an additional charge, we can also supply the brake calipers in the colour of your choice and without the logo, in which case the delivery time is about 2-3 weeks longer.
Get our high performance brake kit now and experience ideal performance and durability.
Suitable for all listed cars with a alloy steering knuckle (not suitable for cars with an steel steering knuckle).
VW Golf 5R/6R handbrake caliper is not included in delivery
Scope of delivery:
- 2x Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422 (left / right)Brembo 20.7673.03/20.7673.04(left / right) including complete new brake calliper bracket kit
- matching set of Rotinger Sport brake discs Audi A6 A7 part no.: 4H0 615 601 F
- ceramic brake pads for less brake dust and longer lifetime
- 2x brake caliper adapter for Golf 5, 6, Audi A1, A3 series
- 2x matching steel braided lines
- Assembly aid for brake disc assembly
- high-strength bolt material
- Material certificate
- Stress analysis / FEM calculation for registration
- Installation instructions (click here)
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a general answer as to which rim size you can ride after your brake conversion. There are simply too many different rims. In rare cases, it can happen that the rims have minimal contact with the brake caliper, in which case you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- ✓ 375x36 1664210912 Mercedes ML / GL brake disc
- ✓ 6-piston 7PP615149J / 7PP615150J Porsche Cayenne 958 GTS brake caliper
- ✓ front axle
- ✓ 356x22 4H0615601F Audi A6 A7 brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ 360x36 A0004211712 / A2184210212 Mercedes CLS 500 brake disc
- ✓ 6-piston 7PP615149J / 7PP615150J Porsche Cayenne 958 brake caliper
- ✓ front axle
- ✓ 375x36 1664210912 Mercedes ML / GL brake disc
- ✓ 6-piston 7PP615149J / 7PP615150J brake caliper
- ✓ front axle
- ✓ 356x22
- ✓ 68mm centering
- ✓ 36mm height
- ✓ 375x36 1664210912 Mercedes ML / GL brake disc
- ✓ 6-piston 7PP615149J / 7PP615150J Porsche Cayenne 958 GTS brake caliper
- ✓ front axle
- ✓ rim assembly
- ✓ M14x1.5 on the wheel hub
- ✓ precise centering
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
- ✓ Choice of color
- ✓ ZR18 / Z18 4-piston brake calipers
- ✓ 955.352.421 / 955352421 955.352.422 / 955352422 7L6615423H / 7L6615423L / 7L6615423D / 7L6615423G
- ✓ Length: 50cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ Bracket for Z18 Porsche 4-piston rear brake caliper
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ 400x38 4H0615301AL / 4H0615301T Audi A6 4G brake disc
- ✓ 6-piston 9J1615123 / 9J1615124 Audi e-Tron brake caliper
- ✓ front axle
- ✓ for front axle: VW Golf 7 8 Audi A3, Seat Leon, Cupra, Skoda and much more.
- ✓ Audi e-tron 6-piston brake calipers part number: 9J1.615.123 / 9J1.615.124 / 4J3615123C / 4J3615124C
- ✓ Brake discs from the Audi A6 4G 400x38mm part number: 4H0 615 301 AL / 4H0 615 301 T
- ✓ Thread M14x1.5
- ✓ ensures comfortable installation of your upgrade brake
- ✓ makes work easier
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 356x22
- ✓ 68mm centering
- ✓ 36mm height
- ✓ 356x22
- ✓ 68mm centering
- ✓ 36mm height
- ✓ Choice of color
- ✓ ZR18 / Z18 4-piston brake calipers
- ✓ 955.352.421 / 955352421 955.352.422 / 955352422 7L6615423H / 7L6615423L / 7L6615423D / 7L6615423G