Brake caliper adapter Golf 7 8 Seat Leon Audi A3 Skoda 400x38mm brake disc Audi 6 piston brake caliper
- ✓ for front axle: VW Golf 7 8 Audi A3, Seat Leon, Cupra, Skoda and much more.
- ✓ Audi e-tron 6-piston brake calipers part number: 9J1.615.123 / 9J1.615.124 / 4J3615123C / 4J3615124C
- ✓ Brake discs from the Audi A6 4G 400x38mm part number: 4H0 615 301 AL / 4H0 615 301 T
€304.48*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brembo brake caliper adapter for the Golf 7 8 Audi A3 8V and many more to the Audi e-tron 6 piston Brembo brake calipers in conjunction with the 400x38 brake discs from the Audi A6 4G.
The adapters fit the following vehicles with aluminium steering knuckles 5QD 407 253 E und 5QD407257B12:
- Audi A3 8V
- Audi A3 Sportback 8YA
- Cupra Leon KL1
- Cupra Formentor KM7
- Seat Ateca KH7
- Seat Leon KL1
- Seat Leon 5F1
- Seat Leon ST 5F8
- Skoda Octavia III
- Skoda Octavia IV NX3
- Skoda Octavia IV Combi NX5
- Skoda Superb III
- VW Arteon 3H7
- VW Golf VII 5G1
- VW Golf VIII CD1
- VW Passat 3G2
- VW Passat Alltrack 3G5
- VW Tiguan AD1
- VW Touran 5T1
Advantages of this brake system:
- extreme deceleration values also in conjunction with our rear axle brake system
- The material certificate included in the scope of delivery enables registration via individual approval, even for series vehicles
- directly suitable for the above-mentioned models and can therefore be easily retrofitted to the original condition at any time
- our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding, re-milling or re-drilling.
Required components:
- Audi e-Tron 6-piston brake caliper part number: 9J1.615.123 / 9J1.615.124 / 4J3615123C / 4J3615124C
- Brake disc from Audi A6 4G 400x38mm part number: 4H0 615 301 AL / 4H0 615 301 T
Scope of delivery:
- 2x brake caliper adapter for VW Golf 7 Audi A3, Seat, Skoda, etc.
- High-strength screw material
- material certificate
- installation instructions
Tipps, Infos und Hinweise:
- Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
- Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.
>> Jetzt direkt zu Spurverbreiterungen nach Wunsch << - Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu Prüfen ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.
Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
- ✓ 356x22 4H0615601F Audi A6 A7 brake disc
- ✓ 4-piston 996352421 / 996352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ 356x22 4H0615601F Audi A6 A7 brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
