.png?ts=1749194267)
.png?ts=1749194267)
Brake caliper adapter Audi RS6 RS7 C8 10 piston Akebono brake caliper 420x40mm brake disc brake system
- ✓ 420x40 4K0615301S Audi RS6 C8 brake disc
- ✓ 10-piston 4J3615123E / 4J3615124E Audi RS7 / E-Tron brake caliper
- ✓ front axle
£187.21*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for the Audi RS6 RS7 C8 to the Audi RS7 / E-Tron 10 piston Akebono brake calipers in conjunction with the brake discs 420x40mm from the Audi RS6 C8.
The adapters are suitable for the following vehicles:
- Audi RS6 C8
- Audi RS7 C8
Advantages of this brake system:
- extreme deceleration values also in conjunction with our rear axle brake system
- The material certificate included in the scope of delivery enables registration via individual approval, even for standard vehicles
- directly suitable for the above-mentioned models and can therefore be easily retrofitted to the original condition at any time
- our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no rewelding, re-milling or re-drilling
.
Required components:
- Audi RS7 / E-Tron 10 piston Akebono brake calipers part number: 4J3615123E / 4J3615124E / 4K0615107N / 4K0615108N
- Brake discs from Audi RS6 C8 420x40mm part number: 4K0615301S
Scope of delivery:
- 2x brake calliper adapter Audi RS6 C8, Audi RS7 C8
- High-strength screw material
- Material certificate
Tipps, Infos und Hinweise:
- Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
- Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
- Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.
>> Jetzt direkt zu Spurverbreiterungen nach Wunsch << - Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.
Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
| Motor | Motorcode |
|---|---|
| RS6 Mild Hybrid quattro | 4A5|600PS(441KW) |
| Motor | Motorcode |
|---|---|
| RS7 Mild Hybrid quattro | 4KA|600PS(441KW) |
| Motor | Motorcode |
|---|---|
| RS6 Mild Hybrid quattro | 4A5|600PS(441KW) |
| Motor | Motorcode |
|---|---|
| RS7 Mild Hybrid quattro | 4KA|600PS(441KW) |
- ✓ 420x40
- ✓ 68mm centering
- ✓ 57mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C