Skip to main content
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Audi S6 A6 C5 Passat V8 A8 Brake disc transformation Brake caliper adapter Rear axle brake adapter 310x22

  • ✓ 310x22 240122-02121 A8 brake disc
  • ✓ original brake caliper
  • ✓ rear axle

Brake caliper adapter to mount brake discs 310x22mm on the rear axle Audi A8 in connection with the original brake calipers.

Suitable for all:

  • Audi A6/ S6 C5 (Type 4B) year of manufacture 1997-2004.
  • VW Passat B5 Type 3B
  • not suitable for the C5 2.7T, 2.7T four-wheel drive, V8 four-wheel drive, or RS6

When converting to the larger A8 brake discs, the braking performance is significantly increased due to the efficiency and better cooling of the brake discs. Another advantage is that the brake discs of the A8 cost almost half compared to the original 269x22 brake discs. Thus, our holders have already paid for themselves after the first brake conversion.

With this conversion, 17 inch rims can still be retained.

Required components:

  • A8 brake discs 310x22 (ATE No: 24.0122-0212.1)

Advantages:

  • Extreme deceleration values also in connection with our rear axle brake system
  • The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles
  • Directly suitable for the models mentioned above and can therefore be restored to the original condition at any time without any problems
  • Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no re-welding - re-milling or re-drilling. 

Delivery:

  • 2x brake caliper holder (see picture)
  • high-strength screw material
  • materials certificate 

Tips, information and advice:

  • To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
  • For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
  • We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
  • Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
  • The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Technical data:

Einbauort: hinten
Lochabstand Achsschenkel: 90mm
Lochabstand Bremssattel : 90mm
Einbauort: hinten
Lochabstand Achsschenkel: 90mm
Lochabstand Bremssattel : 90mm

10 of 10 reviews

Average rating of 4.9 out of 5 stars


90%

10%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


24 September 2019 22:35

Review with rating of 5 out of 5 stars

- S

Klasse Umbau Teile. Bin sehr zufrieden. Auch der Service ist klasse. Danke hierfür

16 December 2020 08:03

Review with rating of 5 out of 5 stars

EFRAIN R

The quality is outstanding, the only drawback is that it took ages to arrive.

16 December 2020 10:15

Review with rating of 5 out of 5 stars

Bert S

Schnelle Lieferung, alles sauber gepasst, Fahrzeugbesitzer glücklich

24 June 2021 21:09

Review with rating of 5 out of 5 stars

Alex C

Ich muss sagen das warten hat sich gelohnt Super Qualität, Material und die Passgenauigkeit ist der Hammer 👌🏻 Wenn Man den Support angeschrieben hat hat man binnen kürzester Zeit eine Antwort bekommen Danke dem ganzen Team Kann ich nur empfehlen und würde wieder hier was kaufen 💪🏻

3 December 2021 19:21

Review with rating of 5 out of 5 stars

Matthias K

Alles tip top io.. verarbeitung und Qualität sind absolut io.. Beratung am Telefon und per Mail sind mega Top.Versand und Lieferzeit sind einwandfrei. Bin sehr zufrieden!

19 July 2023 05:13

Review with rating of 5 out of 5 stars

Marcus K

Super passgenau. Alles wie beschrieben. Sehr guter Service. Jederzeit wieder. Danke.

24 September 2019 10:25

Review with rating of 5 out of 5 stars

- S

Perfekte Ware und super Abwicklung. Anstandslose Kulanz und netter Kontakt. Geliefert wurden leider falsche schrauben wodurch das Gewinde im Halter beschädigt wurde. Angerufen, zurück geschickt und umgehend Ersatz erhalten. Perfekt !!! Ich bin sehr zu frieden!!!

30 January 2020 11:48

Review with rating of 5 out of 5 stars

Marcel F

Verarbeitung ist Top. Passgenauigkeit ebenso. Lediglich eine kurze Einbauanleitung in Papierform wäre wünschenswert.

31 January 2020 20:02

Review with rating of 5 out of 5 stars

Marcel F

Verarbeitung ist Top. Passgenauigkeit ebenso. Lediglich eine kurze Einbauanleitung in Papierform wäre wünschenswert.

4 October 2020 12:31

Review with rating of 4 out of 5 stars

Patrick G

Habe erstmal nur 4 Sterne gegeben da ich den Adapter noch nicht montiert habe jedoch ging der Versand sehr schnell, die Schrauben waren alle dabei sowie die Bestellung als Gast als auch das Downloaden des Gutachtens ging super einfach.

  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Questions? Click here for the contact form

Average rating of 5 out of 5 stars

Steel Brake Line Steel Brake Line Custom Configurator
  • ✓ Desired dimensions
  • ✓ Quickly configurable
  • ✓ Length, color and connections freely selectable

€46.95*
Item number: SF1

Average rating of 4.6 out of 5 stars

2x Audi A8 S8 quattro VW Phaeton 3.0 V6 TDI brake discs Zimmermann sports 310x22 100.3311.52
  • ✓ 310x22
  • ✓ 68mm centering
  • ✓ 42mm height

€220.41*
Item number: ZIM123
ARAMID Keramik Bremsbelag Epytec Golf 4 R32 Audi S3 Bremssattel Hinterachse Handbremse JZW698451
  • ✓ 35% better braking performance
  • ✓ 75% more service life
  • ✓ low dust generation

€38.99*
Item number: 1174

Average rating of 5 out of 5 stars

EBC brake pads Yellowstuff Audi Skoda VW Golf 3 Allroad A1 A2 A3 2.7 T quattro 4.2 V8
  • ✓ Registration-free
  • ✓ Yellowstuff sports surface
  • ✓ temperature up to 900°C

€132.31*
Item number: DP4680R

Average rating of 5 out of 5 stars

EBC brake discs rear axle 310x22 Turbo Groove Audi VW A8 Phaeton 3.2 FSI quattro 4.2
  • ✓ 310x22
  • ✓ 68mm centering
  • ✓ 42mm height

€271.20*
Item number: GD1249
EBC brake discs rear axle 310x22 Premium Disc Audi, VW ( 5x112mm)
  • ✓ 310x22
  • ✓ 68mm centering
  • ✓ 42mm height

€175.55*
Item number: D1249
EBC brake discs rear axle 310x22 Black-Dash Audi VW A8 Phaeton 3.2 FSI quattro 4.2
  • ✓ 310x22
  • ✓ 68mm centering
  • ✓ 42mm height

€271.20*
Item number: USR1249

Average rating of 5 out of 5 stars

EBC brake pads Blackstuff Audi Seat Skoda VW A3 A6 Avant Leon 1.6 1.8 1.9 TDI
  • ✓ Registration-free
  • ✓ Blackstuff Ultimax brake pads
  • ✓ temperature up to 400°C

€69.01*
Item number: DP1230

Average rating of 5 out of 5 stars

EBC brake pads Greenstuff Rear Audi Seat Skoda VW A3 A6 Avant Leon 1.6 1.8 1.9 TDI
  • ✓ Registration-free
  • ✓ Greenstuff sports surface
  • ✓ temperature up to 650°C

€93.16*
Item number: DP21230

Average rating of 5 out of 5 stars

EBC Brake Pads Redstuff Audi A6 Avant 3.0 quattro
  • ✓ Registration-free
  • ✓ Redstuff ceramic covering
  • ✓ temperature up to 750°C

€120.03*
Item number: DP31230C

Average rating of 4.7 out of 5 stars

Brake Pressure Regulator Brake Pressure Reducer Adjustable Braking Force Universal
  • ✓ Brake force regulator Infinitely variable
  • ✓ Perfectly adjustable braking effect
  • ✓ suitable for all vehicles

€80.80*
Item number: 662

Average rating of 4.6 out of 5 stars

1 Bag Special Assembly Paste Lubricant Brake Brake Pads (6gr ) (=49,83EUR pro 100gr)
  • ✓ optimized paste for brake systems
  • ✓ correct viscosity
  • ✓ no squeaking

€2.85*
Item number: LUBE001

Average rating of 5 out of 5 stars

500ml Ultra High Performance Racing Sport Brake Fluid (1L = 74,60€)
  • ✓ Racing brake fluid
  • ✓ Reduction in brake fading
  • ✓ improved pedal feel

€37.30*
Item number: BF307

Average rating of 5 out of 5 stars

2x Audi A8 S8 quattro VW Phaeton 3.0 V6 TDI 4motion brake discs Zimmermann 310x22 100.3311.20
  • ✓ 310x22
  • ✓ 68mm centering
  • ✓ 42mm height

€124.21*
Item number: ZIM122

Average rating of 5 out of 5 stars

500ml DOT 4 Bremsflüssigkeit Brembo Brake Fluid (1L = 23,98€) Bremsanlage umbau
  • ✓ Significantly higher boiling point
  • ✓ Better pedal feel
  • ✓ Suitable for the race track

€11.99*
Item number: 1210