Wheel Hubs Golf MK1 Caddy Scirocco to 5x112 VR6 Conversion PCD Adapter Front
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ VW Golf 1 / VW Jetta / VW Caddy
€150.42*
- 30 days money back guarantee
- shipping within 24h
- 15 years expert knowledge
- 2 years warranty
Wheel hubs for conversion to 5x112 PCD , front axle.
Who wants to finally convert his Golf MK1, Scirocco and Caddy to 5x112mm PCD, is here just right!
The often attempted conversion of the complete steering stub / steering journal of the Golf MK3 is known amongst other things to lead to extremely bad driving.
Advantages:
- the VR6 brake system can be installed
- rims with 5x112 without spacer plates
- 100% fitting
- completely galvanized, therefore best corrosion protection
- the 5x112mm hubs are equipped with M14x1,5 thread. Thus, the original wheel bolts for the VW and Audi rims can be used
- is not authorized under the STVO (German Road Licensing Law) However, it is possible to register your purchase even for series vehicles
Delivery:
- 2x wheel hubs with 5 x 112 PCD and M14x1,5 thread
- material certificate
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
21 October 2018 08:25
Chris H
Exactly what I wanted, work perfect and exactly what I was after, will do business again in future
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems