Skip to main content
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

VW Golf 7 8 Seat Leon Audi A3 Cupra Leon Skoda Bremssatteladapter Renault Megane RS 4-Kolben Bremssattel Tuning Vorderachse Tuning Adapter

  • ✓ 345x30 1K0615301AB / 1K0615301M Golf 5 / 6 brake disc
  • ✓ 4-piston 20A42503 / 20A42504 Renault Megane 3 RS brake caliper
  • ✓ front axle

Bremssatteladapter für die Golf 7 8 Audi A3 8V uvm. auf die Brembo 4 Kolben Bremssättel vom Renault Megane III RS in Verbindung mit der 345 x 30 mm Bremsscheibe vom Audi A3 / Golf 5 .

Die Adapter passen für folgende Fahrzeuge mit Aluachsschenkel:

  • Audi A3 8V
  • Audi A3 Sportback 8YA
  • Cupra Leon KL1
  • Seat Ateca KH7
  • Seat Leon KL1
  • Seat Leon 5F1
  • Skoda Octavia III
  • Skoda Octavia IV NX3
  • Skoda Octavia IV Combi NX5
  • VW Golf VII 5G1
  • VW Golf VIII CD1
  • VW Passat 3G2
  • VW Passat B6
  • VW Passat B7
  • VW Tiguan AD1
  • VW Touran 5T1

Die Bremssättel wurden serienmässig beim Porsche Cayenne, VW Touareg, und Q7 verbaut.
Passend bei allen aufgeführeten Fahrzeugen die einen Aluachsschenkel verbaut haben (nicht passend bei Fahrzeugen mit Stahlachsschenkel)

Benötigte Komponenten:

  • Bremssättel vom Renault Megane 3 RS Teilenummer: 20.A425.03 ; 20.A425.04 ; 410113693R ; 410116043R
  • Bremsscheiben vom Golf 5 6 in 5x112 Lochkreis 345x30 mm Teilenummer VW Audi OE-Nr: 1K0 615 301 AB , 1K0 615 301 M

Vorteile dieser Bremsanlage:

  •  bestmögliche Verzögerungswerte und Performance! Unverzichtbar auch bei Leistungssteigerungen
  •  Komponenten kommen aus Serienfertigung von VW
  •  bei korrekter Montage Eintragung beim TÜV möglich.
  •  inklusive komplettem Schraubenmaterial

Lieferumfang: 

  • 2x Bremssatteladapter komplett verzinkt für VW Golf 7 Audi A3 Seat Skoda, uvm. 
  • kompletter Schraubensatz hochfest.
  • Materialzertifikat

Tips, information and advice:

  • To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
  • For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
  • We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
  • Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
  • The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Technical data:

Einbauort: vorne
Lochabstand Achsschenkel: 146mm
Lochabstand Bremssattel : 130mm
Einbauort: vorne
Lochabstand Achsschenkel: 146mm
Lochabstand Bremssattel : 130mm

1 of 1 reviews

Average rating of 5 out of 5 stars


100%

0%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


25 October 2023 08:53

Review with rating of 5 out of 5 stars

Francisco G

Produkt von hoher Qualität und guter Verarbeitung, perfekter Zusammenbau und optimale Passform, sehr professionell und aufmerksam. Ich bin sehr froh, mit ihnen zu tun zu haben.

  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Questions? Click here for the contact form

Average rating of 5 out of 5 stars

2xbrake disc Audi A3 S3 2.0 TDI quattro VW Golf GTI Zimmermann sports 345x30 Seat Skoda 100.3301.52
  • ✓ 345x30
  • ✓ 65mm centering
  • ✓ 50mm height

€164.61*
Item number: ZIM117

Average rating of 5 out of 5 stars

Brake Caliper Adapter Golf 7R Audi A3 8V Brake Disc 356x22 Audi A6 Porsche Cayenne 4-piston Caliper Tuning Adapter
  • ✓ 356x22 4H0615601F Audi A6 A7 brake disc
  • ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
  • ✓ rear axle

€376.83*
Item number: 1091

Average rating of 4.7 out of 5 stars

Steel Braided Brake Line VW Golf MK5 MK6 MK7 GTI R32 Audi A3 S3 V6 Brembo TTRS Brake Conversion
  • ✓ Length: 63cm
  • ✓ M10x1 outside 45° curved
  • ✓ M10x1 inside straight

€91.90*
Item number: SF109
EBC Bremsbeläge Yellowstuff vorne Renault Megane 3 Coupe RS
  • ✓ Registration-free
  • ✓ Yellowstuff sports surface
  • ✓ temperature up to 900°C

€292.90*
Item number: DP41908R

Average rating of 5 out of 5 stars

500ml Ultra High Performance Racing Sport Brake Fluid (1L = 74,60€)
  • ✓ Racing brake fluid
  • ✓ Reduction in brake fading
  • ✓ improved pedal feel

€32.11*
Item number: BF307

Average rating of 5 out of 5 stars

1 Bag Special Assembly Paste Lubricant Brake Brake Pads (6gr ) (=49,83EUR pro 100gr)
  • ✓ optimized paste for brake systems
  • ✓ correct viscosity
  • ✓ no squeaking

€2.46*
Item number: LUBE001
EBC Brake Pads Redstuff Front Renault Megane 3 Coupe RS
  • ✓ Registration-free
  • ✓ Redstuff ceramic covering
  • ✓ temperature up to 750°C

€246.36*
Item number: DP31908C

Average rating of 5 out of 5 stars

500ml DOT 4 Bremsflüssigkeit Brembo Brake Fluid (1L = 23,98€) Bremsanlage umbau
  • ✓ Significantly higher boiling point
  • ✓ Better pedal feel
  • ✓ Suitable for the race track

€11.10*
Item number: 1210