Skip to main content
Fair prices all year round instead of Black Friday promotions >
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

VW Golf 6 7 Audi A3 8V Adapter Bremse Bremssattel Adapter Alu Hinterachse Bremsscheibe Tuning Adapter

Bremssatteladapter um die Hinterachse (Aluachsschenkel) von unten aufgeführten Modellen auf die 356x22 mm A6 Bremsscheibe in Verbindung mit den original Bremssättel zu verbauen.

Adapter sind passend für folgende VW und Seat Modelle mit Aluachse OE: 5Q0505435J / 5Q0505436J , 5Q0505435G / 5Q0505436G, 5Q0505435H / 5Q0505436H / 1K0505433/ 1K0505434 / 1K0505435AD / 1K0505436AD / 3C0505435G / 3C0505436G /5QA505433A / 5QA505434A

  • VW Golf 7
  • VW Golf 7R
  • VW Golf V (1K)
  • VW Golf VI (5K)
  • VW Golf Variant V (1K)
  • VW Golf Variant VI (5K)
  • VW Passat B6
  • VW Sharan
  • VW Tiguan
  • VW Touran
  • VW Jetta
  • VW T-Roc
  • VW Passat B8
  • VW CC
  • Audi A1 8X
  • Audi A3 8V
  • Audi Q3
  • Audi TTRS 8J
  • Audi TT 8J
  • Audi TT
  • Audi A1 (8X)
  • Audi A3 (8P)
  • Seat Altea (5P)
  • Seat Leon ST 5F
  • Skoda Octavia III 5E
  • Skoda Octavia (1Z)
  • Skoda Octavia (5E)
  • Skoda Superb (3T)
  • Skoda Octavia III
Passend bei allen aufgeführten Fahrzeugen die einen Aluachsschenkel verbaut haben (nicht passend bei Fahrzeugen mit Stahlachsschenkel)

Vorteile dieser Bremsanlage:

  • extreme Verzögerungswerte
  • durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden
  • direkt passend an den oben genannten Modellen und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar
  • unsere EPYTEC Bremssatteladapter erfordern keine Einsendung von Ihren Serienteilen, kein umschweißen, umfräsen oder umbohren

Benötigte Komponenten:

  • Bremsscheibe innenbelüftet 356x22 vom Audi A6 Teile Nr: 4H0 615 601 F 
  • original Bremssättel und Bremsbeläge 

Lieferumfang:

  • 2x Bremssattel Adapter passend für VW Golf 5, 6, 7 mit Aluachse und v. m.
  • passende Zentrierringe
  • Befestigungsmaterial
  • Materialzertifikat

Tips, information and advice:

  • To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
  • For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
  • We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
  • Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
  • The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Technical data:

Einbauort: hinten
Lochabstand Achsschenkel: 23mm
Lochabstand Bremssattel : 90mm
Einbauort: hinten
Lochabstand Achsschenkel: 23mm
Lochabstand Bremssattel : 90mm

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Questions? Click here for the contact form