VW Caddy 1 14d Lowering Kit Rear Axle Conversion
- ✓ Over 55mm Deeper
- ✓ Plug & Play
- ✓ For Caddy 14d
Volkswagen Caddy 14d lowering kit fo rear axle. With this lowering kit, your vehicle can be lowered 55 mm
Advantages:
- the surfaces are galvanized and this provides the best anticorrosive protection
- no drilling, no welding, easy assembly. The blocks are fixed to the axles. Can therefore be returned to the original state at any time. Mounting time: about 1 hour.
- easy and direct driving feeling
Delivery:
- 1x complete lowering kit with blocks and mounting screws
- material certificate for the registration (sent by e-mail)
- installation instructions
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
17 July 2018 13:14
nero117elvira
Versand dauert zwar immer etwas aber sonst alles top!
5 October 2019 17:55
dieknoepfe
Top, immer wieder gerne!
12 March 2018 08:29
hacksi0881
Alles Top. Gerne wieder
26 June 2025 20:55
woelfchen1942
Lieferung sehr schnell. Ich habe es noch nicht verbaut.
6 February 2022 19:18
André L
Wie immer super Materialqualität und super Verarbeitung. Die erforderlichen Unterlagen werden zuverlässig bei Bestellung per separater Mail gesendet. Artikel ist nur zu empfehlen und damit kann auch der Achsversatz nach Tieferlegung problemlos korrigiert werden.
8 October 2017 08:23
j.a.hatfield
Alles super geklappt, immer wieder gern !!!
27 February 2017 13:14
bobbel9999
super schnelle Lieferung, gerne wieder
20 February 2024 07:49
anastasiagonsior
Alles super
26 April 2017 13:43
reifenman01
Super Ware. Netter Kontakt.Gerne wieder.
25 October 2016 17:44
felix-sandra
alles bestens danke
- Is the lowering kit also compatible with 3-layer leaf springs?
Yes, it also fits 3-layer leaf springs which is no problem.
- Do we need shorter shock absorbers for the lowering?
No, that's not mandatory. After installation, it is necessary to check whether the shock absorber in full compression is at its maximum, that is to say if it cannot be compressed any further. This can happen if the vehicle is heavily loaded. In this case shorter shock absorbers must be installed.
| Motor | Motorcode |
|---|---|
| 1.8 | 14|95PS(70KW) |
| 1.6 D | 14|55PS(40KW) |
| 1.6 | 14|75PS(55KW) |
| 1.5 | 14|70PS(51KW) |
| Motor | Motorcode |
|---|---|
| 1.8 | 14|95PS(70KW) |
| 1.6 D | 14|55PS(40KW) |
| 1.6 | 14|75PS(55KW) |
| 1.5 | 14|70PS(51KW) |
- ✓ Up to 100mm higher length
- ✓ installation only takes approx. 1 hour
- ✓ Caddy 14D
- ✓ Brake force regulator 3/15
- ✓ conversion to G60 16V VR6
- ✓ OE NO: 486145
- ✓ Hydraulic clutch slave cylinder
- ✓ Golf 1, 2, 3, Audi A3, Seat Leon
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta 1&2
- ✓ 02A/02J gearbox, 1.8T from Golf 4
- ✓ Golf 1 bearing outer diameter 64mm
- ✓ Complete set of 4
- ✓ Reinforced Shore 65-70
- ✓ Golf 1 Caddy 14D Scirocco Jetta
- ✓ 280x22 535615301 G60 brake disc
- ✓ 1-piston Girling 54 443615124A / 443615123A brake caliper
- ✓ front axle
- ✓ Complete KIT
- ✓ length 1.34m
- ✓ OE NR: C357721335E
- ✓ 4x100 to 5x112
- ✓ 20mm per side
- ✓ 57.1 -> 57.1 centering
- ✓ Registration free
- ✓ For shift linkage
- ✓ stainless steel
- ✓ Hydraulic clutch complete conversion kit
- ✓ Golf 1, Golf 1 Cabrio, Caddy 14D, Jetta, Scirocco
- ✓ Engine conversion from the Golf 4, original pedals are retained
- ✓ VW Golf 2, Golf 3 Passat, Corrado, Jetta, Vento
- ✓ 02a 02j 5 gear
- ✓ 1.8T 16V G60 conversion
- ✓ Suitable for our master brake cylinders
- ✓ plug and play
- ✓ quickly installed
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta
- ✓ 02A/ 02J 5-speed, 02M 6-speed gearbox
- ✓ 1.8T, 1.9TDI, G60
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.
- ✓ For Golf 1 Caddy
- ✓ On Golf 4 Accelerator Pedal
- ✓ OE:VW 1J1721503E
- ✓ mechanical tension roller
- ✓ 1.8T engine conversion
- ✓ Golf 1, Scirocco, Caddy 14d
- ✓ Hydraulic line
- ✓ Golf 1, 2, 3, Corrado, Vento, Scirocco, Caddy
- ✓ Conversion to 6-speed 02M,/02Q or 5-speed 02A,/02J transmission
- ✓ 02M transmission conversion to FWD
- ✓ simple conversion
- ✓ Golf 1, Golf 2, 3, Golf 4 series
- ✓ 020 Gearbox
- ✓ 4&5Gang
- ✓ OE:VAG WZ 3104
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.