Steel Braided Brake Line VW T3 Bus Porsche Brembo Brake COnversion
- ✓ Length: 43cm
- ✓ M10x1 straight outside
- ✓ M10x1 straight inside
€126.50*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Steel braided brake line / steel flexible brake hoses, including material certificate, for conversion to larger brake system e.g. to Girling 38-57 brake caliper, on VW T3 Bus models.
Suitable for the following models, rear axle:
- VW T3 bus
- VW T3 boxbody
Advantages compared to original brake lines:
- no loss of pressure when braking. Exact pressure point
- easy assembly. The original line is simply replaced by the braided steel line
- no swelling as with rubber lines
- cost savings, because the braided steel lines do not need to be changed every 3 or 5 years
- shorter braking
- protection against the rodents
- incl. parts certificate for easy registration
- great optics
Technical data:
- length: 80cm
- connection 1 M10x1 external thread straight
- connection 2 M10x1 internal thread straight
- 90° flanging our fittings are so-called hermaphrodites, which means that every connection fits regardless of whether concave or convex
Delivery:
- 2x steel braided brake lines / steel flexible brake hoses for VW T3 bus, VW T3 boxbody, usw.
- material certificate
We also manufacture according to desired dimensions. With our steel braided lines configurator (click here), you can configure your steel braided brake line, according to your wishes. (Length, color and connections)
Technical data:
Login
24 January 2019 17:40
Boris M
Super
- Does the steel braided brake line also fit other vehicles?
Yes, the brake line can be used in many other vehicles as well. Since almost all car manufacturers use the same size of thread for brake line fittings. Often the only difference is the concave or convex sealing surface. Our fittings are so-called hermaphrodite, which means that each fitting is suitable, concave (valley) and convex (mountain). All you have to do is measure the length and find out the thread size of the fitting you want for your line. So you can see if the line is suitable. You can find the exact details of the brake line in the product description under the technical data.
- There were 2 lens seals supplied with the steel faux lines. Where exactly are these installed?
the lens seals are always included with the orders. They are used to balance the cone, depending on the cone of the steel tube, see picture attached. With flare F you do not need the lens seals, with flare E they must be placed in the internal threads. The direction, which way around, does not matter.
- ✓ drive shaft adapter
- ✓ T3 Syncro 2WS
- ✓ lowering
- ✓ Bore 8mm
- ✓ straight
- ✓ For welding/screwing on
- ✓ Bore 7mm
- ✓ straight
- ✓ For welding/screwing on
- ✓ Bore 11mm
- ✓ 90° bent
- ✓ for welding/screwing
- ✓ Bore 7mm
- ✓ 90° bent
- ✓ for welding/screwing
- ✓ Inner diameter 9mm
- ✓ outer diameter 25mm
- ✓ rubber ring
- ✓ Inner diameter 7.5mm
- ✓ outer diameter 24mm
- ✓ rubber ring