Gesucht nach VW | Golf II | 1.8 Syncro | 19E, 1G1
- ✓ for VW Golf MK 4 Audi A3 Polo, etc
- ✓ connection 1 M10x1 external thread bent
- ✓ connection 2 M10x1 internal thread straight
- ✓ lenght: 57cm / transparent covered
Gearbox cradle for gearbox exchange.For installation of gearbox typ 02M with 6 gears on Golf 2 3 Passat Corrado Jetta Vento.
- ✓ nipple adapter for conversion VW Golf MK1 MK2 MK3 Corrado, Vento, Scirocco, Caddy, to hydraulic line/cable
- ✓ setting / adjust gauge to adjust the 4 and 5 speed 020 gearbox on VAG Golf MK1 MK2 MK3 models, gear shift linkage
- ✓ gas pedal / accelerator pedal adapter / throttle control adapter for Golf 2, Corrado. Conversion to Golf MK4 engine
- ✓ conversion kit to hydraulic clutch Golf MK4 Audi A3 TT
- ✓ suitable for Golf MK2, VW Jetta, Corrado and Passat 35i
- ✓ for Golf MK2 and MK3 for exeample Corrado Jetta Passat
- ✓ conversion to mechanical clutch
- ✓ for Golf 1 series, e.g. Cadyy 14d Corrado Scirocco Jetta.
- ✓ Engine: base Golf 3, Golf 4 Audi A3 etc..
- ✓ Gearbox: 5-speed 02A/02J and CDA from base Golf 3 and 4
- ✓ 6 speed 4Motion 4WD gearbox conversion kit to convert into a 2WD front-wheel drive. Thus, the 6 speed 02M gearbox can be installed on any front-wheel drive vehicle.
- ✓ reinforced engine mounting bracket for VW Golf MK2, MK3, Passat, Corrado, Jetta, Vento
- ✓ engine and gearbox mounting bracket kit for conversion to 02M/ R32 V6 1,8T 6-speed transmission, combined with the VR6 R32 engine in Golf MK2, MK3, Vento
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ for e.g VW Golf MK1 MK2 MK3 G60 Passat Scirocco Polo Corrado Jetta, etc
- ✓ connection 1 M10x1 external thread bent
- ✓ connection 2 M10x1 internal thread straight
- ✓ length 57cm / transparent covered
Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Audi wheel rims on your vehicle VW.
- ✓ sliding piece / slide for all 02M, 02Q 6 speed 02A and 02J 5 speed manual gearbox, e.g on VW Golf MK4 R32 models
Original VW gearbox pull cable. For the installation of a cable pull gearbox typ 02 A equipping G60 VR6 1,8T. Allows its installation with mechanical operation on VW Golf 1 Golf 2 Caddy und Scirocco 1.
- ✓ conversion kit to hydraulic clutch from Golf MK4
- ✓ suitable for Golf MK2, VW Jetta, Corrado and Passat 35i
- ✓ gearbox nounting bracket for conversion to DQ250 DSG 6-speed gearbox into the Golf MK2 MK3 Passat Corrado
Original VW clutch bracket. For the installation of a cable pull gearbox typ 02 A equipping G60 VR6 1,8T. Allows its installation with mechanical operation on VW Golf 1 Caddy und Scirocco 1.
- ✓ for Golf MK2, MK3, for example Passat Corrado Jetta
- ✓ gearbox: 6 spedd 02M, based on Golf MK4 R32 / V6
- ✓ getriebe / engine mounting bracket for Golf 4 VR6 R32 engion on model Golf MK2 MK3, Vento
Short shifter in stainles steel. Tailor-made for VW Golf 2/3 Cabrio,Jetta ,Vento,Passat and Seat Toledo.
50-70% reduction of gear shift distance.
- ✓ for e.g VW T5 T6 bus / transporter
- ✓ connection 1 M10x1 external thread bent
- ✓ connection 2 M10x1 internal thread straight
- ✓ length 60cm / transparent covered
- ✓ clutch slave cylinder from VW Golf 4, Audi A3, Seat Leon and Skoda Octavia
- ✓ engine mounting bracket / support for Golf MK2 MK3 Passat Corrado Vento to install the VR5 engine
- ✓ conversion kit to convert the VW Golf MK2 MK3 Syncro rear axle. Adjustement of track and camber
- ✓ nipple adapter for conversion VW Golf MK1 MK2 MK3 Corrado, Vento, Scirocco, Caddy, to hydraulic line/cable
- ✓ Front sheet metal support VW Golf MK2 MK3 VR6 G60 Jetta Passat Corrado to get more space to install a larger radiator
- ✓ for all engines-models with 020 gearbox (engine reference: PL, KR)
- ✓ e.g VW Golf MK2 16V, VW Scirocco 16V, VW Jetta 16V and Audi 80
- ✓ total weight: 2,9 kg / saving weight compared to the original: 2,6 kg
- ✓ front engine mounting bracket / support for Golf MK2 MK3 Passat Corrado Vento to install the VR5 motor
- ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
- ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle
- ✓ for vehicle with PCD : 4x100 and hub diameter / hub centric : 57,1,5
- ✓ to rims with PCD : 4x108
- ✓ brake disc diameter : 57,,1
- ✓ enlargement per wheel : 20mm
- ✓ 1x reinforced engine mount set for VW Golf 3 Vento VR6 16V GTI
- ✓ shore hardness 68
Brake caliper adapter for front axle brake system to fix brake discs typ G60 diameter 280mm in combination with Porsche 986 Brembo 4 Piston brake calipers on VW vehicles.
- ✓ conversion kit to convert the Syncro rear axle of Golf Corrado and Vento MK3 to the Haldex differential from S3 R32 TT, etc
- ✓ 1x steel strut bar / brace for front axle on models VW Jetta 2, Golf MK2 and Corrado
- ✓ for VW Golf MK4 Audi A3 Polo, etc.
- ✓ connection 1 M10x1 external thread bent
- ✓ connection 2 M10x1 internal thread straight
- ✓ lenght: 20cm / transparent covered
- ✓ reinforced gearbox mounting bracket / support for VW Golf Mk2, Passat, Corrado, Jetta, Vento to install the 5-speed gearbox 02A / 02J
- ✓ adapter ring for the Polo 9N wheel hub
- ✓ ABS Sensor ring Mark 20 from Golf MK4 can be taken over
- ✓ 2x brake caliper carrier and brake calipers for the front axle of the VW Golf 1, Caddy, Golf 1 Cabriolet, Jetta 1, Scirocco, Polo and many more to convert to the G60 brake system.
- ✓ 857615125, BDA168
- ✓ for Golf MK2, MK3 series, e.g. Passat Corrado Jetta
- ✓ gearbox: 6 speed 02M , based on Golf 4 R32 / V6
- ✓ for front axle: Golf MK1, MK2, Mk3, Passat, Corrado, Jetta, Polo, Seat Toledo
- ✓ brake caliper: Porsche Cayenne or Tuareg, reference 7L6 615 123 T + 7L6 615 124 T
- ✓ brake disc: Golf MK4 R32 334x32mm , reference 1J0 615 301AA + 1J0 615 302 A
- ✓ for vehicle with PCD : 4x100 and hub diameter / hub centric: 57,1
- ✓ rims with P.C.D. : 5x130
- ✓ rims diameter : 71,6
- ✓ enlargement per wheel: 20mm
- ✓ for e.g. VW Golf 1 2 3 G60 Passat Scirocco Polo Corrado Jetta, and many more.
- ✓ Connection 1 M10x1 male thread bent 45°
- ✓ Connection 2 M10x1 female thread straight
- ✓ Length 52cm long / Transparent sheathed
- ✓ for conversion Golf MK1 MK2 MK3 Caddy, etc
- ✓ 1x short drive shaft flange , reference 02M 409 356 A
- ✓ 1x sealing ring , reference 02M 409 189
- ✓ hub centric ring for brake disc
- ✓ internal diameter: 57,10 mm
- ✓ external diameter: 66,90 mm
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
Hexagonal socket head cap screw high resistance with chute
Type: M10x80
Blank
Quality 12.9
Cylinder head screw with hexagon socket
Size: M14x65
Thread gradient: 1.5
Material: steel high-strength quality 12.9
Hexagonal socket head cap screw entirely thread
Type: M12x35
Stainless steel (V2A)
Cylinder head screw with hexagon socket high-strength
Size: M10x95
Quality: 10.9
Hexagonal screw high resistance entirely thread
Type: M16x40
Thread: 1.5
Galvanized
Quality: 10.9
- ✓ cylinder-head bolts with hexagon socket, flat head, high-strength
- ✓ dimension: M14x100
- ✓ alloy blank
- ✓ quality 10.9
