Golf MK2 MK3 Camber Adjustment Screw Syncro

Name: Golf MK2 MK3 Camber Adjustment Screw Syncro
Brand: EPYTEC
SKU: 661
Price: 151.99 EUR
Availability: InStock
Rating: 4.8 (10 reviews)

€151.99*

Prices incl. VAT plus shipping costs

21 Reviews

Available

Delivery by Wednesday, 08.05.2024 if you order within the next 14 Hours.

Product number: 661

From an order value of €30 your delivery is free inside Germany.

Weight: 1.112 kg

Einbauort: hinten

Your benefits

Einfache TÜV Eintragung
Qualität Made in Germany
Faire Preise ohne zwischenhandel du kaufst direkt beim Hersteller und Enwickler des Produktes
Weltweit Nr 1 in Sachen Tuning Adapter
15 Jahre Expertenwissen
10 Jahre Garantie

Passendes Zubehör

Wheel Hub Hub Adapter Beetles Aluminum Porsche PCD 5x130

Porsche conversion PCD 5x130 for beetle with our wheel hub / hub adapter made of aircraft aluminum suitable for front axle.We took measurements of the exterior contours of the original Porsche 944 hub and the inner contours of the original Beetle hub. Then, thanks to the CAD software we designed this wheel hub. This hub can be installed exactly on the Beetle with the original wheel bearing ( OE: 311 405 625, 311 405 645 ). Therefore, without a PCD adapter plate, it is possible to have on your Beetle a 5x130 PCD of Porsche type.For the wheel hubs the grease caps of the Porsche 944 can be used.Shaft sealing ring / Simmerring are taken over from the original Beetle. This article is also ideal if it is combined with our brake caliper brackets / supports to install the Porsche 944 calipers with the discs of your Beetle. These items can also be found in our shop! Other Advantages: easy assembly (only to be replaced with original parts) 100% fit weight saving on the front axle and therefore better driving in cornering top deceleration thanks to a lower mass of inertia No corrosion of the rims at the hub. And also: easy tire change is possible brake disc centric: 102,8mm rim centric: 71,5mm Delivery: 2x wheel hubs / hub adapters made of aircraft aluminum for conversion to Porsche 5x130 PCD material certificate Static stress analysis for TÜV registration

€392.72*

Wheel Offset Plates Rear Axle Low Profile VW Golf MK2 MK3 Passat Jetta Corrado

Rear axle, wheel offset plates on low profile vehicles. By lowering the vehicle, the axle is no longer in the middle of the wheel house. It is therefore possible that the wheel touches the wheel house. It also affects optics and directional stability.Thanks to our offset plates, which are installed between the axle support and the body, the axle and the wheel are new in the middle of the wheel house. Suitable for the following vehicles (does not fit VR6): Golf MK2 Golf MK3 VW Corrado VW Jetta Seat Toledo Delivery: 2x rear axle wheel offset plates for the mentioned models complete required high strength screw material material certificate

€153.21*

VW Golf MK3 R32 Corrado Passat Syncro Rear Brake Caliper Adapter S3 V6 280mm Brake Disc

Brake caliper adapter, rear axle, for Golf MK3, Corrado, Syncro to install the brake calipers of Golf MK4 V6/R32 , Audi S3 8L, YoC 99, combined with the front brake discs 280mm VR6 . Suitable for the following models of VW and Seat, with Syncro axles: Golf MK3 Syncro Corrado Syncro Passat 35i Syncro Advantages of this brake system: top deceleration, without comparison with conventional brake discs thanks to the internally vented discs, a better fading better performance thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles For the front axle, we have in our shop brake caliper adapters for conversion to Porsche brake system, combined with R32 brake discs . Visit our shop. Required components: brake caliper:VW Golf R32 V6 oder S3 VW , reference left 8N0615423C , right 8N0615424C brake caliper mounting bracket: reference 8N0615425B brake disc: Passat 35i VR6 , reference 1H0615301, 280 mm Due to high customer demand, our adapters are supplied in the color black, which is applied with the GNC-OX nitrating process. This process guarantees the best mechanical-dynamic properties against wearing out. Delivery: 2x brake caliper adapters complete screw kit material certificate stress analysis

€151.77*

VW Golf MK3 Corrado Haldex Rear Axle Differential Conversion Kit VR6 Turbo 4Motion 16V

Conversion kit to convert the Syncro rear axle from Golf Corrado and Vento MK3 to the Haldex differential from S3 R32 TT, etc. With our perfectly adapted mounting bracket, which you simply weld to your standard Syncro rear axle, you can simply mount the Haldex system of the S3 R32 onto the original Syncro axle. Haldex reference: 02D 525 554 J The big advantage of our conversion kit is that the cardan shaft from the Audi TT 8N (MK1) The Haldex system is designed in such a way that the large Hardy flexible disc and the large stabilizer can be used. Furthermore, the drive shafts are almost straight. As a result, the joints are perfectly relieved. Click here for the matching drive shafts (click here) Delivery: complete conversion kit for Haldex differential to Corrado Vento Golf MK3 Syncro axle (see picture) Installation instructions

€237.61*

Wishbone Reinforcing Plate Golf MK2 G60 Corrado

Wishbone reinforcing plate for all Golf MK2 / MK3 and Corrado. D The plates can be simply welded on the original wishbones, up and down. The original wishbones will be more stable and robust and the driving of the vehicle is greatly improved.Absolutely also recommended for tuned vehicles. Delivery: 4x wishbone reinforcing plates, complete for 2 wishbones. Suitable for alle Golf MK2, MK3 Corrado

€37.99*

Wheel Spacer Hub Centric Track Plate Brake Disc Height Modification Golf MK1 MK2 MK3 MK4 Audi

2x spacers / plates made of high-strenght aluminium which are mounted under the brake disk. These plates are used to mount brake discs of the new VAG series which have a too large overall height und diameter and would thus strip on the wheel carrier / bearing. With our plates, the brake disc comes outward. The spacers / track plates are perfect for the brakce discs of Golf MK3, MK4 and Audi series wiht 5x100 PCD, which have a large overall height and could not otherwise be used. The new VAG models usually have a 5x112 PCD. This can be modified by us at an avarage price of 59.- € per brake disc. You can find corresponding brake caliper adapters in our shop. Due to the TÜV certificate (technical report) included in the scope of delivery, a registration can be carried out by individual acceptance. Technical data: thickness: 15 mm PCD: 5x100 hub centric: 57,1 disc diameter: 67,8 Delivery: 2x spacers / plates made of high-stregnht aluminim, 15 mm TÜV - certificate for registration

€150.80*

Wheel Spacer Hub Centric Track Plate Brake Disc Height Modification Golf MK1 MK2 MK3 MK4 Audi Wheel

2x spacers / plates made of high-strenght aluminium which are mounted under the brake disk. These plates are used to mount brake discs of the new VAG series which have a too large overall height und diameter and would thus strip on the wheel carrier / bearing. With our plates, the brake disc is pushed to the outside. The spacers / track plates are perfect for Golf MK3, MK4 and Audi series with brakce discs, which habe 5x100 PCD , which have a large overall height and could not otherwise be used. The new VAG models usually have a 5x112 PCD. This can be modified by us. You can find corresponding brake caliper adapters in our shop. Due to the TÜV certificate (technical report) included in the scope of delivery, a registration can be carried out by individual acceptance. Technical data: thickness: 5 mm PCD: 5x100 hub centric: 57,1 disc diameter: 64,8 Delivery: 2x spacers / plates made of high-stregnht aluminim, 5 mm TÜV - certificate for registration

€121.75*

Fine Thin Drive Shaft VW Golf MK1 MK2 Caddy Seat Axle Joint Ball Joint

Fine drive / transmission shaft without axle joints for many VW and Seat models like e.g. VW Golf MK1, Caddy. Absolutely necessary when lowering! The shaft is made of high-strength steel and manufactured in one piece and is a complete drive shaft. Thus also suitable for high-performance engines.This drive shaft is also suitable for all conversions to 5-speed transmission from Golf 3 with eg 1.8T or G60 engines. In addition, we recommend the left drive shaft with the Epytec Article No: APA128 to find in our store (click here). Thanks to our thin and extremely stable transmission / drive shaft, you avoid many problems at the body that usually appear during a chassis lowering. With the installation of our drive shaft, you avoid many modifications and you save time.It is important that when installing the new drive shaft, no excess pressure is created in the sleeve. In our installation instructions you can see how to prevent this (click here). Technical data: assembly side: front rear right length: 643,5 mm external toothing wheel side: 30,0 external diameter, differential side: 33,3 external diameterr: 27,0 mm Delivery: 1x fine drive / transmission shaft without axle joints for many VW and Seat models Our drive shafts are registration-free and therefore do not have to be registered.

€166.81*

Details

Wheel Hubs Golf MK2 MK3 Passat Vento Seat Ibiza PCD Adapter to 5x100 Front

Wheel Hubs for conversion to 5x100 PCD for the ffront axle. Who wants to finally convert his VW Golf MK2, MK3, Passat Vento, Seat Ibiza to den 5x100mm PCD, is here just right! Advantages: the VR6 brake system can be mounted rims with 5x100 without spacer plates 100% fitting completely galvanized, therefore best corrosion protection the 5x100mm hubs are equipped with M14x1,5 thread. Thus, the original wheel bolts for the VW and Audi rims can be used is not authorized under the STVO (German Road Licensing Law) However, it is possible to register your purchase even for series vehicles Delivery: 2x wheel hubs with 5 x 100 PCD and M14x1,5 thread material certificate

€205.68*

Thin Fine Drive Shaft VW Golf MK1 Cabriolet MK2 Lupo Polo without Axle Joint

Thin fine drive shaft without axle joint, left side, for VW Golf MK1 Cabriolet, MK2, Caddy, Lupo and Polo with Ø 100 flange. Absolutely necessary when lowering! The shaft is 26mm thick, made of high-strength steel and manufactured in one piece and is a complete drive shaft. Thus also suitable for high-performance engines.This drive shaft is also suitable for all conversions to 5-speed transmission from Golf 3 with eg 1.8T or G60 engines. In addition, we recommend the right shaft with the Epytec Article No: 16773-1HPS to find in our store (click here).The shaft is 11mm shorter than the original shaft therefore ideally suited for lowered vehicles. Thanks to our thin and extremely stable transmission / drive shaft, you avoid many problems at the body that usually appear during a chassis lowering.It is important that when installing the new drive shaft, no excess pressure is created in the sleeve. In our installation instructions you can see how to prevent this (click here).With the installation of our drive shaft, you avoid many modifications and you save time. Technical data: assembly side: front axle left length: 420,0 mm Aexternal toothing wheel side: 30,0 external diameter differencial side: 33,3 external diameter: 27,0 mm Delivery: 1x fine thin drive / transmssion shaft, without axle joint, for VW and Seat models Our drive shafts are registration-free and therefore do not have to be registered.

€166.81*

Control Arm Suspension Wishbone Kit with Reinforced Steering Bar / Rod VW Golf MK3 Vento VR6 GTI 16V

Reinforced wishbone Kit for VW Golf MK3 VR6 GTI 16V Vento VR6 2.0 and Seat Toledo 16VThese wishbones are technically innovative and ensure a longer service life. At the suggestion of garages / car rpai shops, we examined particularly stressed vehicle parts. During development we attached importance to ensure that the HPS components clearly outperforme the standard of the original parts. In order to ensure this high performance standard, the HPS technology was tested and certified by TÜV Rheinland (German Technical Inspection Agency in Rhineland). Advantages: HPS vehicle parts are reinforced and resistant to bending. high corrosion protection and lubricity through the use of semi-synthetic high-performance grease due to mirror-smooth surfaces, reduction of abrasion and wear equipped with special gaiters Delivery: 1x complete reinforced wishbone kit, front axle, with mounting screws, for VW Golf MK3 VR6 GTI 16V Vento VR6 2.0 and Seat Toledo 16V

€181.99*

Reinforced Control Arm Suspension Wishbone Kit Audi TT 8N Quattro Audi S3 8L VW Golf IV R32 VW Beetle RSi

Reinforced wishbone Kit for Audi TT 8N Quattro, Audi S3 8L, VW Golf MK4 R32, VW Beetle RSi, VW Bora V6These wishbones are technically innovative and ensure a longer service life. At the suggestion of garages / car repair shops, we examined particularly stressed vehicle parts. During development we attached importance to ensure that the HPS components clearly outperforme the standard of the original parts. In order to ensure this high performance standard, the HPS technology was tested and certified by TÜV Rheinland (German Technical Inspection Agency in Rhineland). Advantages: HPS vehicle parts are reinforced and resistant to bending. high corrosion protection and lubricity through the use of semi-synthetic high-performance grease due to mirror-smooth surfaces, reduction of abrasion and wear equipped with special cuffs Delivery: 1x complete reinforced wishbone kit, front axle, with mounting screws, for Audi TT 8N Quattro, Audi S3 8L, VW Golf 4 R32, VW Beetle RSi.

€268.84*

Original VW Audi Golf 4 A3 8L Quattro 4Motion Suspension Control Arm Wishbone Rear Axke Bushing Track Adjustement

Adjustable suspension control arm / wishbone arm for the VW Golf MK4, Audi A3 series.Thanks to our suspension arm, you can adjust the camber as you like. Between + and - 3,5°.These wishbones are absolutely necessary if you have a low-profile vehicle. This prevents wear-out of the tires on one side and saves unnecessary costs. Suitable for the following vehicles: Audi A3 (8L) Audi S3 (8L) Audi TT (8N) VW Golf MK4 Golf 4 R32 VW Bora VW Beetle Seat Leon Our suspension arm simply replaces the original, rear axle, manufacturing number: 1J0505323Therefore suitable for both below and aboveThe wishbone struts are delivered including a PU bushing. Delivery: 2x suspension arm / control arm / wishbone arm for Golf MK 4, Audi S3, Audi TT, VW Bora, Seat Leon, etc. PU bushings already pressed in. material certificate installation instructions

From €126.59*

Wheel Hub VW Golf MK2 MK3, Passat Corrado VR6 / Bolt Circle/ Pitch Circle Diameter Conversion from 5x112 Front Axle

Wheel hubs for conversion to 5x112 pitch circle diameter (PCD) on front axle. Who wants to convert his Golf MK2 MK3, Passat Vento, Seat Ibiza to 5x112 PCD, is here just right.! Advantages: the VR6 brake system can be installed 5x112 rims can be used whitout spacers 100% fits completly galvanized. Best anticorrosive protection the 5x112mm hubs are equipped with M14x1.5 thread. Thus, the Audi and VW rims can be mounted over with the original wheel bolts it is possible to register your purchase even for series vehicles by TÜV (German Technical Inspection Agency). But not permitted by STVO (German Road Licensing Law) Delivery: 2x wheel hubs, 5x112 PCD with M14x1.5 thread material certificate

€150.42*

VW Golf 3 Corrado Haldex Rearward Bracket Differential Conversion Rear Axle 4Motion Turbo VR6

Matching rearward bracket for our Haldex conversion to adapt the diffenetial to the body.Haldex Treference: 02D 525 554 JThe bracket fits perfectly with our Haldex conversion kit to convert the Syncro rear axle of Golf Corrado and Vento Mk3 to the Haldex differential from S3 R32 TT.Article 598Suitable for the Powerflex bearing with the part reference: PFF85-501G Delivery: 1x rear bracket for Haldex conversion to adapt the diffenetial to the body installation instructions

€68.33*

VW Golf MK3 Corrado Haldex Rear Axle Differential Conversion Kit Counterpart 4Motion Turbo VR6 16V Steering

Conversion kit to convert the Syncro rear axle from Golf Corrado and Vento MK3 to the Haldex differential from S3 R32 TT, etc. With our perfectly adapted mounting bracket, which you simply weld to your standard Syncro rear axle, you can simply mount the Haldex system of the S3 R32 onto the original Syncro axle.Including rear mounting bracket for fitting differential at the body. Haldex reference: 02D 525 554 J The big advantage of our conversion kit is that the cardan shaft from the Audi TT 8N (MK1) and the original drive shafts can be used. The Haldex system is designed in such a way that the large Hardy flexible disc and the large stabilizer can be used. Furthermore, the drive shafts are almost straight. As a result, the joints are perfectly relieved.Click here for the right drive shafts (click here) article ISP112-VR6 Delivery: complete conversion kit for Haldex differential to Corrado Vento Golf MK3 Syncro axle (see picture) including rear mounting bracket for fitting differential at the body Installation instructions

€277.12*

VW Golf MK3 2.0 Syncro Golf 4 Cabriolet 2.0 Control Arm Suspension Wishbone Left Right Front Axle Steering Bars Track Rod Ends

Control arm / suspension / wishbone kit, complete left and right, with steering bars and track rod ends, suitable forGolf 3 2.0 Syncro, Golf 4 Cabriolet 2.0, VW Vento 1.9 TDI, uvm. criteriondetail quantity unit kit steering typ wishbone assembly side front axle on both sides assembly side bottom supplementary item / info 2 with lock screw set supplementary item / info 2 with steering rod / bar necessary quantity 1 Delivery: 2x wischbones 2x steering bars / rods 2x track rod ends

€134.63*

Centering and Spacer Plate under Brake Discs Overall Height Change VW Polo WRC

2x spacers made of high-strength aluminum which are mounted under the brake disc. These are used to install brake discs from the new VAG series that are too high overall and centered too much and would therefore rub against the wheel carrier. The brake disc comes out further with our spacers. The track spacers are perfect for use with VW Polo WRC series with 5x100 and 5x112 bolt/pitch circle brake discs, which have a large overall height and could otherwise not be used. The new VAG models usually have a 5x112 bolt/pitch circle. You can also find suitable brake caliper adapters in our shop. Thanks to the material certificate supplied with the order technical inspection certificate- TÜV -(technical report), it is possible to register your purchase. Technical data: thickness of the spacer: 5 mm bolt / pitch circle: 5x100 und 5x112 centering of the brake disc on the vehicle: 65,1 centering for new brake disc: 68,0 Delivery: 2x high-strength aluminum spacers 5mm for VW Polo WRC series technical inspection certificate- TÜV -(technical report)

€81.31*

Wheel hubs 5x100 VW Golf 2 3 Variant Cabriolet Golf 4 Cabriolet Passat Variant Vento Seat Cordoba Ibizia 2 Bolt ircle Adapter Change in Front with ABS Ring Tuning

Wheel hubs for conversion to 5x100 bolt circle / PCD for the front axle with ABS ring. Suitable for Golf MK2 Golf MK3 Variant Golf MK4 Cabriolet Vento, Caddy 2 van Corrado Seat Cordoba Ibizia 2 Toledo 1 Who wants to finally convert to den 5x100mm bolt circle / pitch circle diameter, is here just right! Vorteile: the VR6 brake system can be mounted rims with 5x100 without spacer plates including ABS ring 100% fitting completely galvanized, therefore best corrosion protection the 5x100mm hubs are equipped with M14x1,5 thread. Thus, the original wheel bolts for the VW and Audi rims can be used is not authorized under the STVO (German Road Licensing Law) However, it is possible to register your purchase even for series vehicles Delivery: 2x wheel hubs with 5 x 100 PCD and M14x1,5 thread for VW Golf MK2 MK3 Variant Cabriolet Golf MK4 Cabriolet Passat Variant Vento Seat Cordoba Ibizia II material certificate

€150.42*

VW Golf MK3 Corrado Passat Syncro Adapter Rear R32 S3 V6 Brake Caliper Adsapter 310x22mm Phaeton Brake Disc

Brake caliper adapter, rear axle, on models Golf MK3 Syncro, for conversion to the brake calipers of Golf MK4 V6/R32 Audi S3 8L .YoC 99, combined with the VW Phaeton 310x22mm brake discs. Adapters are suitable for the following VW and Seat models with Syncro axles: Golf MK3 Syncro Corrado Syncro Passat 35i Syncro Vorteile dieser Bremsanlage: top deceleration, without comparison with conventional rear brake discs better fading thanks to internally ventilated discs better performance thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles Required components brake caliper: VW Golf R32 V6 or S3, left VW reference 8N0615423C, right VW reference 8N0615424C brake caliper mounting bracket: reference 8N0 615 425 B brake caliper: VW Phaeton 310x22mm, VW reference 3D0 615 601 D modification of the disc circle diameter to 5x100 (possibility of making it directly from EPYTEC) Delivery: 2x brake caliper adapters for Golf 3, Passat, Corrado Syncro high-strength mounting screws installation instructions centering rings

€180.97*

Tankbänder Tankband Krafstoffband Edelstahl Golf 3 Syncro 1H0201653C Spannband Halteband

Tankband / Spannband, Krafststoffband aus Edelstahl, Rostfrei, passend für folgende Fahrzeuge: VW Golf 3 Syncro VW Golf 3 Variant Syncro Bei den original Tankbändern ist immer das Problem das diese extrem verrosten, bzw. komplett durch Rosten. Meistens können diese nach einer Demontage nicht mehr verwendet werden, da sie einfach nicht mehr Haltbar sind und müssen getauscht werden. Mit unseren Epytec Tankbändern, hast du dieses Problem nie wieder. Unsere Tankbänder sind aus rostfreiem Edelstahl gefertigt und haben somit eine extrem lange Haltbarkeit und bieten auch längerfristig eine gute Optik. original Vergleichsnummer: 1H0201653C Lieferumfang: 1x passender Satz Tankbänder, Krafstoffbänder aus Edelstahl für den Golf 3 Syncro, Golf 3 Variant Syncro

From €89.08*

Germany	€0.00
United Kingdom	€21.46
Austria	€18.21
France	€18.21
Switzerland	€22.11
Italy	€16.70
Spain	€16.70
Andorra	€16.70
Arab Emirates	€43.78
Afghanistan	€43.78
Antigua and Barbuda	€51.81
Anguilla	€51.81
Albania	€22.32
Armenia	€43.78
Niederländische Antillen	€51.81
Angola	€51.81
Antarctica	€21.46
Argentina	€51.81
American Samoa	€51.81
Australia	€51.81
Aruba	€51.81
Åland Islands	€21.46
Azerbaijan	€43.78
Bosnia and Herzegovina	€22.32
Barbados	€51.81
Bangladesh	€43.78
Belgium	€18.21
Burkina Faso	€51.81
Bulgaria	€17.41
Bahrain	€43.78
Burundi	€51.81
Benin	€51.81
Saint Barthélemy	€21.46
Bermuda	€51.81
Brunei Darussalam	€43.78
Bolivia (Plurinational State of)	€51.81
Bonaire, Sint Eustatius and Saba	€51.81
Brazil	€51.81
Bahamas	€51.81
Bhutan	€43.78

Golf MK2 MK3 Camber Adjustment Screw Syncro

Functional description:

Delivery:

Login