Gesucht nach VW | Golf II | 1.8i Cat Syncro | 19E, 1G1

• ✓ for VW Golf MK 4 Audi A3 Polo, etc 
• ✓ connection 1 M10x1 external thread bent
• ✓ connection 2 M10x1 internal thread straight
• ✓ lenght: 57cm / transparent covered

Gearbox cradle for gearbox exchange.For installation of gearbox typ 02M with 6 gears on Golf 2 3 Passat Corrado Jetta Vento.

• ✓ nipple adapter for conversion VW Golf MK1 MK2 MK3 Corrado, Vento, Scirocco, Caddy, to hydraulic line/cable

• ✓ setting / adjust gauge to adjust the 4 and 5 speed 020 gearbox on VAG Golf MK1 MK2 MK3 models, gear shift linkage

• ✓ gas pedal / accelerator pedal adapter / throttle control adapter for Golf 2, Corrado. Conversion to Golf MK4 engine

• ✓ conversion kit to hydraulic clutch Golf MK4 Audi A3 TT
• ✓ suitable for Golf MK2, VW Jetta, Corrado and Passat 35i

• ✓ for Golf MK2 and MK3 for exeample Corrado Jetta Passat
• ✓ conversion to mechanical clutch

• ✓ for Golf 1 series, e.g. Cadyy 14d Corrado Scirocco Jetta.
• ✓ Engine: base Golf 3, Golf 4 Audi A3 etc..
• ✓ Gearbox: 5-speed 02A/02J and CDA from base Golf 3 and 4

• ✓ 6 speed 4Motion 4WD gearbox conversion kit to convert into a 2WD front-wheel drive. Thus, the 6 speed 02M gearbox can be installed on any front-wheel drive vehicle.

• ✓ reinforced engine mounting bracket for VW Golf MK2, MK3, Passat, Corrado, Jetta, Vento

• ✓ engine and gearbox mounting bracket kit for conversion to 02M/ R32 V6 1,8T 6-speed transmission, combined with the VR6 R32 engine in Golf MK2, MK3, Vento

Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9

• ✓ for e.g VW Golf MK1 MK2 MK3 G60 Passat Scirocco Polo Corrado Jetta, etc
• ✓ connection 1 M10x1 external thread bent
• ✓ connection 2 M10x1 internal thread straight
• ✓ length 57cm  / transparent covered

Bolt circle adapter pour conversion from 4x100mm on 5x112mm.Allows use of Audi wheel rims on your vehicle VW.

• ✓  sliding piece / slide for all 02M, 02Q 6 speed 02A and 02J  5 speed manual gearbox, e.g on VW Golf MK4 R32 models

Original VW gearbox pull cable. For the installation of a cable pull gearbox typ 02 A equipping G60 VR6 1,8T. Allows its installation with mechanical operation on VW Golf 1 Golf 2 Caddy und Scirocco 1.

• ✓ conversion kit to hydraulic clutch from Golf MK4
• ✓ suitable for Golf MK2, VW Jetta, Corrado and Passat 35i

• ✓ gearbox nounting bracket for conversion to DQ250 DSG 6-speed gearbox into the Golf MK2 MK3 Passat Corrado

• ✓ for Golf MK2, MK3, for example Passat Corrado Jetta
• ✓ gearbox: 6 spedd 02M, based on Golf MK4 R32 / V6

Original VW clutch bracket. For the installation of a cable pull gearbox typ 02 A equipping G60 VR6 1,8T. Allows its installation with mechanical operation on VW Golf 1 Caddy und Scirocco 1.

• ✓ getriebe / engine mounting bracket for Golf 4 VR6 R32 engion on model Golf MK2  MK3, Vento

Short shifter in stainles steel. Tailor-made for VW Golf 2/3 Cabrio,Jetta ,Vento,Passat and Seat Toledo.
50-70% reduction of gear shift distance.

• ✓ engine mounting bracket / support for Golf MK2 MK3 Passat Corrado Vento to install the VR5 engine

• ✓ clutch slave cylinder from VW Golf 4, Audi A3, Seat Leon and Skoda Octavia

• ✓ for e.g VW T5 T6 bus / transporter
• ✓ connection 1 M10x1 external thread bent
• ✓ connection 2 M10x1 internal thread straight
• ✓ length 60cm  / transparent covered

• ✓ conversion kit to convert the VW Golf  MK2 MK3 Syncro rear axle. Adjustement of track and camber

• ✓ nipple adapter for conversion VW Golf MK1 MK2 MK3 Corrado, Vento, Scirocco, Caddy, to hydraulic line/cable

• ✓ Front sheet metal support  VW Golf MK2 MK3 VR6 G60 Jetta Passat Corrado to get more space to install a larger radiator

• ✓ for all engines-models with 020 gearbox (engine reference: PL, KR)
• ✓ e.g VW Golf MK2 16V, VW Scirocco 16V, VW Jetta 16V and Audi 80 
• ✓ total weight: 2,9 kg / saving weight compared to the original: 2,6 kg

• ✓ front engine mounting bracket / support for Golf MK2 MK3 Passat Corrado Vento to install the VR5 motor

• ✓ universal suitable for all vehicles with track rod ends / heads which have a M14x1,5 internal thread
• ✓ the reverse direction of installation of the head allows a deeper lowering of the vehicle

• ✓ for vehicle with PCD : 4x100 and hub diameter / hub centric : 57,1,5
• ✓ to rims with PCD : 4x108
• ✓ brake disc diameter : 57,,1
• ✓ enlargement per wheel : 20mm

• ✓ 1x reinforced engine mount set for VW Golf 3 Vento VR6 16V GTI
• ✓ shore hardness 68

Brake caliper adapter for front axle brake system to fix brake discs typ G60 diameter 280mm in combination with Porsche 986 Brembo 4 Piston brake calipers on VW vehicles.

• ✓ conversion kit to convert the Syncro rear axle of Golf Corrado and Vento MK3 to the Haldex differential from S3 R32 TT, etc

• ✓ 1x steel strut bar / brace for front axle on models VW Jetta 2, Golf MK2 and Corrado

• ✓ reinforced gearbox mounting bracket / support for VW Golf Mk2, Passat, Corrado, Jetta, Vento to install the 5-speed gearbox 02A / 02J

• ✓ for VW Golf MK4 Audi A3 Polo, etc.
• ✓ connection 1 M10x1 external thread bent
• ✓ connection 2 M10x1 internal thread straight
• ✓ lenght: 20cm / transparent covered

• ✓ adapter ring for the  Polo 9N wheel hub
• ✓ ABS Sensor ring Mark 20 from Golf MK4 can be taken over

• ✓ 2x brake caliper carrier and brake calipers for the front axle of the VW Golf 1, Caddy, Golf 1 Cabriolet, Jetta 1, Scirocco, Polo and many more to convert to the G60 brake system.
• ✓ 857615125, BDA168

• ✓ for Golf MK2, MK3 series, e.g. Passat Corrado Jetta
• ✓ gearbox: 6 speed 02M , based on Golf 4 R32 / V6

• ✓ for front axle: Golf MK1, MK2, Mk3, Passat, Corrado, Jetta, Polo, Seat Toledo
• ✓ brake caliper: Porsche Cayenne or Tuareg, reference  7L6 615 123 T + 7L6 615 124 T
• ✓ brake disc: Golf MK4 R32 334x32mm , reference 1J0 615 301AA + 1J0 615 302 A

• ✓ for vehicle with PCD : 4x100 and hub diameter / hub centric: 57,1
• ✓ rims with P.C.D. : 5x130
• ✓ rims diameter : 71,6
• ✓ enlargement per wheel: 20mm

• ✓ for e.g. VW Golf 1 2 3 G60 Passat Scirocco Polo Corrado Jetta, and many more.
• ✓ Connection 1 M10x1 male thread bent 45°
• ✓ Connection 2 M10x1 female thread straight
• ✓ Length 52cm long / Transparent sheathed

• ✓ for conversion Golf MK1 MK2 MK3 Caddy, etc
• ✓ 1x short drive shaft flange , reference 02M 409 356 A
• ✓ 1x sealing ring , reference 02M 409 189