Golf Mk1 Caddy Scirocco Conversion Set VR5 Engine 6-speed Gearbox 02M Golf Mk4 R32 Front-wheel Drive
- ✓ Golf 1, Caddy 1, Scirocco, Jetta
- ✓ 02M 6-speed gearbox, VR5 20V 10V AQN AGZ engine
- ✓ Front wheel drive, original pedals
In addition, reinforced engine and gearbox bearings are installed, which are perfect for all tuned engines and are more durable compared to the standard bearings.
This conversion kit contains all parts that we recommend for a conversion on models VW Golf Mk1, Scirocco and Caddy 1 to the 02M 6-speed gearbox, combined with the VR5 20V or 10V AQN AGZ engine.
This is the perfect all-in-one solution for your conversion.
Advantages:
- quick and easy complete conversion
- your don't need to upgrade after this conversion
- original pedals (clutch and brake) can be retained
- long-life-cycle
- no modification of the body
- time saving
Delivery:
- 2x gearbox mounting brackets / holders for VW Golf Mk1 Caddy
- 1x engine mounting brackets / holders for VW Golf Mk1 Caddy Scirocco Jetta 1 & 2 for VR5 20V 10V AQN AGZ engine conversion
- reinforced engine and gearbox bearings
- material certificate
- installation instructions
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Login
- In which position do I have to press in the bearings?
The position is always different due to the tolerances on the bodies. It is best to proceed as follows:
-Mount the engine and gearbox mount (without bearings).
-Hang the engine and gearbox in the vehicle so that everything fits perfectly.
-Mark the position where the bearings are to be pressed in.
-Press the bearings into place.
Because the bearings are eccentric, you can align the engine and gearbox perfectly.
- Why does the transmission mount not fit on my 02m transmission?
If the transmission mount does not fit the mounting points of your 02m transmission, the problem is this: You have the 02m transmission from a Seat Ibizia, Fabia or VW Polo. These 02M transmissions are relatively rare and the mounts are different than the 02M transmissions used in the VW Golf, Audi A3, etc. The easiest and cheapest way is to get the 02m gearbox from a Golf or Audi, then our gearbox holder will fit perfectly.
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta 1&2
- ✓ 02A/02J/EBA transmission
- ✓ VR5 20V and 10V AQN AGZ motors
- ✓ Complete set of 4
- ✓ Reinforced Shore 65-70
- ✓ Golf 1 Caddy 14D Scirocco Jetta
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta
- ✓ 02M 6-speed gearbox, R32 V6, 1.8T 1.9 TDI engine
- ✓ simple engine conversion
- ✓ Angle drive, gear reinforcement
- ✓ VW, Audi
- ✓ 02M/ 02Q 6-speed gearbox
- ✓ Golf 1, Caddy 14d, Scirroco 1
- ✓ VR6 1.8T engine
- ✓ stable cross member front panel
- ✓ 02M gearbox reinforcement
- ✓ easy conversion
- ✓ suitable for all 02M / 02Q gearboxes
- ✓ assembly stand
- ✓ VR6 engine conversion
- ✓ VW Golf, Passat, Corrado
- ✓ Transmission reinforcement: Golf 1, Golf 2, Golf 3, Golf 4, 4 VR6 R32 S3
- ✓ VW / Audi 02M 02Q 6-speed gearbox
- ✓ No more play
- ✓ High quality brass
- ✓ For all 02m 02q 02a and 02j gearboxes
- ✓ 65mm diameter
- ✓ OEM number: 171 199 214D
- ✓ reinforced Shore 68