Skip to main content
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Flywheel Kit Sinter BMW E28 E30 E34 2,5L and 2,7 M20 Engines 228mm Flywheel Clutch Pressure Plate

  • ✓ 2.5, 2.7 M20 engine
  • ✓ 228mm clutch
  • ✓ 228NM torque

Clutch kit for 2.5 and 2.7 M20 engines with Motronic / L-Jetronic:

  • BMW 5 series 525e ( E28 )
  • BMW 3 series 325i 325iX 325e ( E 30 )
  • BMW 3 series Touring 325i 325iX ( E30 )
  • BMW 3 series Cabrio 325i ( E30 )
  • BMW 5 series 525i ( E34 )
  • BMW Z1 Roadster 2.5

consists of:

  • lightened high-strength chrome molybdenum flywheel EPYTEC
  • spring-loaded sinterpad clutch disc SACHS
  • clutch pressure plate, reinforced design ;SACHS

Advantages of our clutch kit with lightened flywheel

  • our flywheel weighs only 5.3 kg, the standard wheel over 12.0 kg
  • exactly identical in construction to the series components, therefore easy replacement possible
  • it is not necessary to send us the original engine flywheel
  • higher contact pressure and less abrasion of the pressure plate
  • all our flywheels are made of chrome moly steel with quality G 1.75, extremely suitable for high-speed motors
  • significantly better acceleration due to less inertia
  • higher speeds possible
  • the engine runs faster, no loss of performance.
  • suitable for motorsports, racing or serial vehicles
  • lower fuel consumption
  • significant reduction of the turbo lag
  • precision balancing, bearings are less affected, finely balanced according to DIN ISO 1940
  • including ring gear
  • suitable for either a standard clutch or a high-performance clutch
  • made in Germany

Advantages of the torsion spring clutch disc with sinterpad clutch lining/coating and the reinforced pressure plate

  • aggressive starting behavior
  • significantly higher transmittable torque
  • the torsional damping achieves a higher impact moment
  • better thermal resilience compared to organic friction coating/lining
  • longer lifetime
  • less lift
  • higher pressing force
  • higher speeds possible
  • very resistant to dirt

Areas of application:

  • due to the aggressive starting behavior ideal for motor sports
  • chip-tuning
  • turbo and compressor conversions
  • 1/4 mile race
  • circuit, e.g. long-distance race/endurance racing
  • hill race
  • rally
  • clubsport
  • autocross
  • slalom
  • drift

Technical data:

  • transmittable torque[Nm]: 228
  • weight of the lightened single-mass flywheel: 5,3 Kg

Delivery:

  • 1x lightened high strength chrome molybdenum flywheel EPYTEC
  • 1x spring-loaded sinterpad clutch disc SACHS
  • 1x clutch pressure plate, reinforced design SACHS 

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


slide 7 to 9 of 4