Skip to main content
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
tuev sued logo
Made in germany

Bremssatteladapter Mercedes E55 E63 W211 C219 CLS 55 CLS 63 SL63 SL55 R230 CLS 63 AMG Bremsanlage Benz 380x36 Bremssattel 8-Kolben Tuning Adapter

Bremssattel Adapter für die Vorderachse des Mercedes Benz E55 AMG, E63 W211, C219, CLS 55 AMG, CLS 63 AMG, SL 63, 55 R230, um die Mercedes Benz Bremsscheibe 380x36mm in Verbindung mit dem Mercedes W211 AMG 8-Kolben Bremssattel zu fahren.

Vorteile dieser Bremsanlage:

  • Top Verzögerungswerte, kein Vergleich zu den herkömmlichen Bremsscheiben
  • einfache Montage
  • ein Muss bei Leistungssteigerung
  • Materialzertifikat wird mitgeliefert
  • es können die original 19 Zoll Felgen gefahren werden
  • einfach wieder in original Zustand rückrüstbar

Benötigte Komponenten:

  • Mercedes W211 AMG 8-Kolben Bremssättel Teilenummer: A003420318332 Brembo Nummer: 20.7919.01 / 20.7919.02
  • Bremsscheibe vom Mercedes SL55 AMG (R129) von der Vorderachse in 380x36mm Teilenummer: A2304210912 Brembo Nr: 09.8878.23

Lieferumfang:

  • 2x Bremssattel Adapter für Mercedes Benz E55 AMG, E63 W211, C219, CLS 55 AMG, CLS 63 AMG, SL 63, 55 R230
  • inklusive hochfestes Schraubenmaterial
  • Materialzertifikat
  • Einbauanleitung

Tipps, Infos und Hinweise:

  • Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
  • Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
  • Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden. >> Jetzt direkt zu Spurverbreiterungen nach Wunsch <<
  • Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst. Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Technical data:

Brake caliper hole spacing: 256
Hole spacing steering knuckle: 110
Mounting location: front
Brake caliper hole spacing: 256
Hole spacing steering knuckle: 110
Mounting location: front

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.


  • Can I also use other brake discs as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

  • Can I also use other brake calipers as specified in the required components?
  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Questions? Click here for the contact form
Motor Motorcode
E 55 AMG W210|354PS(260KW)
E 63 AMG W211|514PS(378KW)
Motor Motorcode
55 AMG R230|476PS(350KW)
63 AMG R230|525PS(386KW)
55 AMG R230|517PS(380KW)
Motor Motorcode
CLS 55 AMG C219|476PS(350KW)
CLS 63 AMG C219|514PS(378KW)

Motor Motorcode
E 55 AMG W210|354PS(260KW)
E 63 AMG W211|514PS(378KW)

Motor Motorcode
55 AMG R230|476PS(350KW)
63 AMG R230|525PS(386KW)
55 AMG R230|517PS(380KW)

Motor Motorcode
CLS 55 AMG C219|476PS(350KW)
CLS 63 AMG C219|514PS(378KW)