Brake Caliper Adapter VW Passat 3B 3BG Brake Disc 269x22 Audi Allroad C5 Brake Caliper Rear Axle Conversion
- ✓ 269x22 4Z7615601 Audi C5 brake disc
- ✓ 1-piston 4B0615423 / 4B0615424 3BG 4 motion brake caliper
- ✓ rear axle
€93.77*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
⚠️ Important Notice:
This item is produced exclusively upon request. As it is a made-to-order special production based on demand, there is no right of withdrawal pursuant to § 312g (2) No. 1 of the German Civil Code (BGB).
Therefore, returns or exchanges are excluded.
Brake caliper adapter on model Passat 3BG, rear axle, for conversion to rear brake disc 269x22 mm, combined with the brake calipers of Passat 3BG 4 Motion.
Advantages of this brake system:
- top deceleration, without comparison with conventional brake discs
- easy assembly
- better performance
- supplied material certificate
Required components:
- brake caliper: 3BG 4 Motion brake caliper, reference VW left 4B0 615 423, right 4B0 615 424
- brake caliper mouting bracket: reference 4D0 615 425 B
- brake disc: 269x22 vom Audi Allroad C5 reference, 4Z7 615 601
Delivery:
- 2x brake caliper adapters
- complete screw kit
- material certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
2 June 2021 12:22
stefan4-244
Alles super! Gerne wieder.
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
| Motor | Motorcode |
|---|---|
| 1.6 | 3B3|102PS(75KW) |
| 2.0 | 3B3|115PS(85KW) |
| 2.5 TDI | 3B3|163PS(120KW) |
| 1.8 | 3B2|125PS(92KW) |
| 2.0 | 3B2|120PS(88KW) |
| 1.9 TDI | 3B2|90PS(66KW) |
| 2.0 | 3B3|130PS(96KW) |
| 1.9 TDI | 3B2|110PS(81KW) |
| 1.8 T | 3B2|150PS(110KW) |
| 2.5 TDI | 3B2|150PS(110KW) |
| 1.8 T 20V | 3B3|150PS(110KW) |
| 1.9 TDI | 3B3|130PS(96KW) |
| 1.6 | 3B2|101PS(74KW) |
| 2.0 TDI | 3B3|136PS(100KW) |
| 1.9 TDI | 3B2|101PS(74KW) |
| 2.5 TDI | 3B3|150PS(110KW) |
| 1.9 TDI | 3B2|115PS(85KW) |
| 1.9 TDI | 3B3|101PS(74KW) |
| Motor | Motorcode |
|---|---|
| 1.6 | 3B3|102PS(75KW) |
| 2.0 | 3B3|115PS(85KW) |
| 2.5 TDI | 3B3|163PS(120KW) |
| 1.8 | 3B2|125PS(92KW) |
| 2.0 | 3B2|120PS(88KW) |
| 1.9 TDI | 3B2|90PS(66KW) |
| 2.0 | 3B3|130PS(96KW) |
| 1.9 TDI | 3B2|110PS(81KW) |
| 1.8 T | 3B2|150PS(110KW) |
| 2.5 TDI | 3B2|150PS(110KW) |
| 1.8 T 20V | 3B3|150PS(110KW) |
| 1.9 TDI | 3B3|130PS(96KW) |
| 1.6 | 3B2|101PS(74KW) |
| 2.0 TDI | 3B3|136PS(100KW) |
| 1.9 TDI | 3B2|101PS(74KW) |
| 2.5 TDI | 3B3|150PS(110KW) |
| 1.9 TDI | 3B2|115PS(85KW) |
| 1.9 TDI | 3B3|101PS(74KW) |
- ✓ 35% better braking performance
- ✓ 75% more service life
- ✓ low dust generation
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable