Brake Caliper Adapter Rear Axle VW T5 T6 Transporter Brake Disc Audi A6 356x22 4-piston Porsche Cayenne
- ✓ 356x22 4H0615601F Audi A6 brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche cayenne brake caliper
- ✓ rear axle
€422.74*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, rear axle, on models VW T5 T6 transporter, for conversion to 356x22 Audi A6 brake discs, combined with the Porsche Cayenne 4 -piston brakce caliper and the original T5 T6 brake calipers for the brake for the handbrake.
Suitable for following vehicles::
- VW T5 transporter
- VW T6 transporter
Advantages of this brake system:
- high deceleration, also in conjunction with our rear axle braking system
- top deceleration, without comparison with conventional brake discs
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Required components:
- brake disc: Audi A6 356x22mm, reference 4H0 615 601 F
- brake caliper: original VW T5 transporter, reference 7H0 615 423 / 7H0 615 424
- brake caliper mounting bracket: original VW T5, reference 7H0 615 425
- brake caliper: Porsche Cayenne 4-piston, reference 955.352.421 + 955.352.422 ; Brembo reference 20.7673.03 + 20.7673.04
- for the brake discs, the bolt / pitch circle must be changed to 5x120 and the hub bore to 76.0mm (we can do this for 149€ for the pair of brake discs)
Delivery:
- 2x brake caliper adapters for VW T5 and T6 transporter
- high-strength mounting screws
- material certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
27 November 2023 16:14
holmes240v
Received with many thanks
27 November 2023 16:14
holmes240v
Received with many thanks
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: