Brake caliper adapter OPEL Astra G OPC I OPC II Zafira A Porsche Cayenne ZR18 ZL18 Brake 360x32 Brake disc Mercedes CLK
- ✓ 361x32 2094210112 Mercedes CLK brake disc
- ✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne ZR18 ZL18 brake caliper
- ✓ front axle
€222.46*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brembo brake caliper adapter to be able to use the Porsche Cayenne ZR18 / ZL18 6-piston brake caliper in conjunction with the Mercedes CLK 360x32mm brake discs on the front axle of the Opel Astra G OPC.
The adapters fit the following vehicles with wheel bearing housing part number: 5308012 / 5308013 :
- Opel Astra G CC
- Opel Astra G Caravan
- Opel Astra G Limousine
- Opel Zafira A
- Opel Astra G Coupe
- Opel Astra G Cabrio
Advantages:
- Thanks to the material certificate included in the scope of delivery, registration via individual approval is also possible for series vehicles
- Fits directly to the above-mentioned models and can therefore be easily retrofitted to the original condition at any time
- Our EPYTEC brake caliper adapters do not require your standard parts to be sent in, no rewelding, re-milling or re-drilling.
Required components:
- Brake calipers Porsche Cayenne ZR18 ZL18 part no. 95535142153 / 95535142253
- Brake discs from Mercedes CLK 361x32 mm part number 2094210112
- Brake disc must be rebored to 5x110 and the hub diameter must be turned up to 70mm (can also be done in-house)
- the brake pads must be machined approx. 4mm on the outer edge, otherwise they will protrude beyond the brake disc.
Scope of delivery:
- 2 x brake caliper adapters for the Opel Astra G CC, Caravan, Saloon, Coupe, Convertible, Zafira A
- Set of high-strength bolts
- Template to check whether the brake system fits under your wheel rim
- Material certificate
The minimum tyre size must be 19 inches.
Tipps, Infos und Hinweise:
- Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
- Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
- Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.
>> Jetzt direkt zu Spurverbreiterungen nach Wunsch << - Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.
Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: