Brake caliper adapter Golf 1 Caddy 14D Scirocco Jetta Porsche 996 4-piston brake caliper 330x28 Brake disc tuning adapter
- ✓ 330x28 51827474 Lancia Delta brake disc
- ✓ 4-piston 996351425 / 996351426 Porsche 996 brake caliper
- ✓ front axle
€212.20*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for the front axle of the Golf 1, Golf 1Cabrio, Caddy 14d, Jetta 1, Scirocco to the 330x28mm Lancia Delta III brake discs in conjunction with 4-piston Porsche 996 brake calipers.
Advantages of this braking system:
- Extreme deceleration values also in conjunction with our rear axle brake system
- Brake discs with 4 bolt circle. The original Golf 1 bolt circle can therefore be retained.
- Thanks to the material certificate included in the scope of delivery, registration via individual approval is also possible for standard vehicles
- Fits directly on the above-mentioned models and can therefore be easily retrofitted back to the original condition at any time
- Our EPYTEC brake caliper adapters do not require you to send in your standard parts, no rewelding - re-milling or re-drilling
Required components:
- Brake discs Lancia Delta III 330x28 Total height 45mm Original part no.: 51827474.
- The hub bore must be turned up to 65.00mm (can also be done in-house, click here)
- Porsche brake calipers from 996 Porsche original part no.: 996.351.425/426 (Only 100% compatible with the specified Porsche calipers)
Not STVO-approved, but the material certificate included in the scope of delivery can also be used to enable registration by individual approval for series vehicles.
Minimum rim size:
- Can be used with 17 inch rims and larger. The minimum size of the inner diameter may vary depending on the rim shape and type.
Scope of delivery:
- 2x brake caliper adapter for VW Golf 1, Caddy 14D, Scirocco, Jetta
- Matching high-strength screw set
- 1x material certificate
Tipps, Infos und Hinweise:
- Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
- Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
- Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.
>> Jetzt direkt zu Spurverbreiterungen nach Wunsch << - Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.
Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 280x22 G60 & VR6 brake discs 1H0615301A 535615301
- ✓ 1-piston 8N0615423C 8N0615424C 8N0615425B 1J0615425F
- ✓ Rear axle
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ for rear axle: Golf 1, Golf 1 Cabrio, 2, 3, GTI, VR6, Caddy 14d, Jetta, Corrado, Passat 35i, Scirocco, Vento, Polo 6N1, Seat Cordoba, Ibiza, Toledo
- ✓ brake caliper: left VW reference 8N0615423C, right VW reference 8N0615424C
- ✓ brake caliper mounting bracket: VW reference 8N0 615 425 B or lacquered blue from R32, 1J0 615 425 F
- ✓ brake disc:Golf 2 G60 280x22mm, VW reference 535615301 pot depth 40mm
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Length: 57cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ 320x28
- ✓ 98mm centering
- ✓ 45mm height
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track