6 Speed Gearbox Mounting Bracket 02M Golf MK1 Scirocco Caddy 14d G60 16V VR6 4WD Axle
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta
- ✓ 02M 6-speed gearbox
- ✓ VAG 6 cylinder engines
€178.15*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Gearbox mounting brackets, to install the R32 6 speed gearbox 02M, combined with 16V VR6 1.8T engine on Golf MK1 Caddy 14d Scirocco, etc., 4WD-axles .
Due to the stable construction (6 mm high quality ST52 steel) and the accuracy of adjustment, the gearbox mounting bracket can be fixed to the original holder, which means that an absolute fit of the gearbox can be guaranteed. No welding on the body is necessary, which saves a lot of time when converting your vehicle.
The gearbox mounting brackets are supplied galvanized, which provides the best protection against corrosion.
Delivery:
- 1x gearbox mounting bracket for conversion to 6 speed gearbox 02M / R32 V6 1,8T, 4WD.
- 1x gearbox mounting bracket, bottom rearward
- material certificate
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Login
2 April 2021 18:32
PATRICE Z
Robuste.
29 July 2020 12:55
Fumat S
Rien à dire belle pièces
12 August 2020 00:40
Fumat S
Bon produit bonne qualité
13 August 2020 18:45
Fumat S
Bon produit bonne qualité
4 October 2020 07:44
Dennis H
Passgenauigkeit gut. Keine Verbesserungsvorschläge
29 July 2020 08:44
Fumat S
Rien à dire belle pièces
4 October 2020 14:08
Dennis H
Passgenauigkeit gut. Keine Verbesserungsvorschläge
16 October 2020 05:58
Franco B
Top wahre passt genau
- In which position do I have to press in the bearings?
The position is always different due to the tolerances on the bodies. It is best to proceed as follows:
-Mount the engine and gearbox mount (without bearings).
-Hang the engine and gearbox in the vehicle so that everything fits perfectly.
-Mark the position where the bearings are to be pressed in.
-Press the bearings into place.
Because the bearings are eccentric, you can align the engine and gearbox perfectly.
- ✓ VW G60, 1.9TDI, 16V ABF, G60 1.9TDI engine code 1Z
- ✓ Golf 1, Caddy 14D, Scirocco
- ✓ simple engine conversion
- ✓ Golf 1, Caddy 1, Scirocco
- ✓ 02M 6-speed gearbox, 1.8T / 1.9TDI engine
- ✓ original pedals, hydraulic clutch
- ✓ Golf 1, Scirocco, Caddy 14D
- ✓ 1.8l 20vT, 1.9 TDI
- ✓ simple engine conversion
- ✓ Golf 1, Caddy 1, Scirocco
- ✓ 02M 6-speed gearbox, VR5 20V/ 10V AQN AGZ engine
- ✓ All-wheel drive
- ✓ 02M transmission conversion to FWD
- ✓ simple conversion
- ✓ Golf 1, Golf 2, 3, Golf 4 series
- ✓ Golf 1, Caddy 1, Scirocco
- ✓ 02M 6-speed gearbox, VR6/R32 V6 1.8T engine
- ✓ All-wheel drive
- ✓ Golf 1, Caddy 14d, Scirocco Jetta 1 & 2
- ✓ 02A gearbox from G60 or VR6 engine
- ✓ Bearing 64mm
- ✓ Complete set of 4
- ✓ Reinforced Shore 65-70
- ✓ Golf 1 Caddy 14D Scirocco Jetta
- ✓ 02M gearbox reinforcement
- ✓ easy conversion
- ✓ suitable for all 02M / 02Q gearboxes
- ✓ drive shaft flange
- ✓ VW Golf 1.86.5mm to 94mm
- ✓ For Golf 1 Caddy
- ✓ On Golf 4 Accelerator Pedal
- ✓ OE:VW 1J1721503E
- ✓ Golf 1, Caddy 14d, Scirroco 1, Jetta
- ✓ R32, VR6 engine
- ✓ simple engine conversion
- ✓ Adapter rings Golf 3, Polo 9N wheel hub
- ✓ ABS sensor
- ✓ Mark 20 conversion
- ✓ VW Golf 2, Golf 3 Passat, Corrado, Jetta, Vento
- ✓ Golf 3 16V, 1.8T transverse installation, Golf 4TDI
- ✓ 4 motions
- ✓ Golf 1, Caddy 14d, Scirroco
- ✓ 16V engine conversion
- ✓ OE No. 055199293G
- ✓ Golf 1 gearbox / engine mount
- ✓ OEM no.: 171 199 151A
- ✓ reinforced Shore 68
- ✓ Golf 1 engine mount
- ✓ OEM number: 171 199 339
- ✓ reinforced Shore 68
- ✓ 74.5mm diameter
- ✓ OEM no.: 171 199 214G
- ✓ reinforced Shore 68
- ✓ 65mm diameter
- ✓ OEM number: 171 199 214D
- ✓ reinforced Shore 68
