VW Golf MK7 Touran Audi A3 Q3 Brake Caliper Adapter 360x32 Disc Audi RS4 B5 Brembo 8-piston Brake Caliper Audi RS5 Brake System
- ✓ 360x32 8D0615302B Audi RS4 B5 brake disc
- ✓ 8-piston 8E0615107 / 8E0615108 Audi RS4 RS5 brake caliper
- ✓ front axle
€198.40*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter, front axle, on models VW Golf MK7 Audi A3 for conversion to the Audi RS4 RS5 8-piston Brembo calipers, combined with the Audi RS4 B5 360x32mm brake discs.
Suitable for the following vehicles with aluminum axles:
- Audi A3
- Audi A3 Cabriolet
- Audi Q2
- VW Arteon
- VW Golf Sportsvan
- VW Golf MK7
- VW Golf 7 Variant
- VW Passat Variant
- VW Tiguan
- VW Touran
- Seat Ateca
- Seat Leon
- Seat Leon ST
- Skoda Octavia 3
- Skoda Octavia 3 estate
- Skoda Superb 3
- Skoda Superb estate 3
Advantages of this brake system:
- high deceleration, also in conjunction with our rear axle braking system
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Required components:
- brake caliper: Audi RS4 RS5 8-piston original Brembo, reference left 8E0615107 right E0615108
- brake disc: Audi RS4 B5 360x32mm, reference 8D0615302B or RS4 B7 365x34mm, reference8E0615301AB
- (when the 365 discs are installed, it is necessary to place washers on the brake caliper mount so that the brake disc size is compensated)
Delivery:
- 2x brake caliper adapters for VW Golf MK7 Audi A3 series
- material certificate
- high-strength mounting screws
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 356x22 4H0615601F Audi A6 A7 brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ 360x32
- ✓ 68mm centering
- ✓ 47mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ 356x22 4H0615601F Audi A6 A7 brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ 360x32
- ✓ 68mm centering
- ✓ 47mm height
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ 365x34
- ✓ 68mm centering
- ✓ 46.5mm height
- ✓ 2.0 TSI & 2.0 TDI engines
- ✓ 240 clutch
- ✓ lightens 8.2 kg
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ Front axle
- ✓ Golf 7, Golf 8, Audi 83, Seat
- ✓ OE number VW 5Q0407272DN, CEVAM 50834
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
