VW Golf 7 8 Seat Leon Audi A3 Cupra Leon Skoda Porsche Panamera Bremsanlage Bremssattel Adapter 375x36 Tuning Adapter
- ✓ 375x36 1664210912 Mercedes GL brake disc
- ✓ 6-piston 7PP615149J / 7PP615150J Porsche Cayenne 958 GTS brake caliper
- ✓ front axle
€222.43*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Bremssattel Adapter für die Golf 7 8 Audi A3 8V Baureihe auf die Porsche Panamera Bremssättel in Verbindung mit den Mercedes ML 350 Bremsscheiben 375x36.
Die Adapter passen für folgende Fahrzeuge mit Aluachsschenkel:
- Audi A3 8V
- Audi A3 Sportback 8YA
- Cupra Leon KL1
- Seat Ateca KH7
- Seat Leon KL1
- Seat Leon 5F1
- Skoda Octavia III
- Skoda Octavia IV NX3
- Skoda Octavia IV Combi NX5
- VW Golf VII 5G1
- VW Golf VIII CD1
- VW Passat 3G2
- VW Passat B6
- VW Passat B7
- VW Tiguan AD1
- VW Touran 5T1
Es kann sein, dass Lenkeinschlagbegrenzer für kompletten Lenkeinschlag verbaut werden müssen, diese findest du unten im passenden Zubehör.
Vorteile dieser Bremsanlage:
- Extreme Verzögerungswerte auch in Verbindung mit unserer Hinterachsbremsanlage
- Bremsscheiben sind sehr günstig in der Anschaffung
- durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden
- Direkt passend an die oben genannten Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar
- Unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von euren Serienteilen, kein umschweißen, umfräsen oder umbohren.
Benötigte Komponenten:
- Porsche Cayenne 958 GTS Panamera Bremssättel Teilenummer: 7PP615149J / 7PP615150J 7PP615123 / 7PP615124 20.A221.03 (Schaftlänge vom Bremssattel muss 87mm sein, siehe gelbe Markierung auf dem letzten Bild)
- Bremsscheiben vom Mercedes Benz GL - Klasse 375x36mm Teilenummer: 166 421 0912
- Die Bremsbeläge müssen an der oberen Kante leicht angefast werden.
Lieferumfang:
- 2x Bremssattel Adapter
- 2x passende Zentrierringe
- passendes hochfestes Schraubenmaterial
- Materialzertifikat
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
28 July 2023 10:03
Valeri T
Perfect fitment on my S3 8V. Quality bolts and center rings. Tpu can include blueprint paper to redrill the GLE rotors in order to have centering bolt.
16 April 2024 11:58
Valeri T
Fits perfect and looks like a quality prosuct. Used twise on my S3 8Vs.
28 July 2023 10:03
Valeri T
Perfect fitment on my S3 8V. Quality bolts and center rings. Tpu can include blueprint paper to redrill the GLE rotors in order to have centering bolt.
26 September 2024 23:46
ALEX P
Hervorragende Qualität der Produkte, Kundenservice und Informationen auf ihrer Website. Ich bin in den USA ansässig, superschneller Versand über DHL. Würde gerne wieder dort einkaufen. Danke, Alex
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ 356x22 4H0615601F Audi A6 A7 brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ 375x36
- ✓ 67mm centering
- ✓ 54.5mm height
- ✓ Length: 63cm
- ✓ M10x1 outside 45° curved
- ✓ M10x1 inside straight
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
