Opel Kadett Vectra Calibra GSI 16V Camber correction plates Camber regolation
Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.
£44.02*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Product description
Correction plates for installation on rear axle.
Tailor-made for all Opel vehicles with front-whel drive and equipped with 16V axle as:
- Kadett E
- Calibra
- Vectra
- Astra F / H
Allow a perfect camber adjustment.This guarantees a even consumption of your tires.
Recommanded for sporty driving on public road and for any kind of partecipation in races.
Technical information:
- The correction plates are installed between axle and axle tap. Installation is simple and it’s excution doesn’t require much time.
- The wheel lane widens only 3mm on every side.
- The degree of tilt of every plate is negativ of 0.5.
- Any plate typ with different degree of tilt can be delivered upon request.
Scope of delivery:
- 2x Correction plates for camber adjustment, galvanized.
Technical data:
Login
13 May 2023 16:39
calibra30_0
Alles super danke
7 September 2016 01:14
blitz-schrauber
Alles Bestens, gerne wieder!
30 August 2019 20:38
stevegate_68
Alles super
22 April 2023 10:46
Hans-Heinrich E
Hallo,alles wie gehabt wi immer super!!! Gruss Heinrich
18 April 2023 16:36
Hans-Heinrich E
Hallo,alles super geklappt gerne wieder!!!!Gruß Heinrich
14 November 2017 22:43
boomer21101996
Sehr gut gerne wieder !
19 July 2020 21:44
luisa11112011
Note 1, Klasse Ebayer top Ware, immer wieder gerne
23 June 2022 12:46
schorch115
Super Ware
12 December 2017 17:42
schnuffelpuppe1987
Alles supi danke ......
22 March 2018 09:14
perfekt-westernhorse666
Top, sehr schneller Versand
- Do I need longer screws or can the old ones remain in place?
With Epytec camber correction plates, you can continue to use the original screws up to +-2°. For camber correction plates with an angle of more than 2°, we recommend lightly sanding a washer and placing it under the screw head to ensure it remains flush with the camber correction plate. Of course, if the camber correction plate is thicker, new screws may be required.
- Does the ABS still work after installing the camber adjustment plate?
From a camber of 1 °, the ABS sensor may no longer be parallel to the ABS ring. Then, the position of the ABS sensor on the vehicle should be slightly changed.