Opel Kadett Vectra Calibra 16V Camber correction plates -1.0G negative
- ✓ Camber correction plates for installation on rear axle.Allow a perfect camber adjustment on your vehicle.
£84.41*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Correction plates for installation on rear axle.
Tailor-made for all Opel vehicles with front-whel drive and equipped with 16V axle as:
- Kadett E
- Calibra
- Vectra
- Astra F / H
Allow a perfect camber adjustment.This guarantees a even consumption of your tires.
Recommanded for sporty driving on public road and for any kind of partecipation in races.
Technical information:
- The correction plates are installed between axle and axle tap. Installation is simple and it’s excution doesn’t require much time.
- The wheel lane widens only 3mm on every side.
- The degree of tilt of every plate is negativ of 1,0.
- Any plate typ with different degree of tilt can be delivered upon request.
Scope of delivery:
- 2x Correction plates for camber adjustment, galvanized.
Technical data:
Login
5 March 2018 16:50
anndrian2204
Alles super
30 November 2021 03:16
schaaeberh
☆☆☆☆☆ Alles Top, gerne wieder! Dankeschön!
10 June 2019 09:55
skaystelli_6
Einfach top
8 October 2017 10:47
mr.yohhh-babe
‹(•¿•)›·´¯`..´¯`._.· S·U·P·E·R··E·B·A·Y·E·R··._.´¯`..´¯`·‹(•¿•)› Vielen Dank !
24 August 2016 20:09
guido-c-kadett
Alles Gut,gerne wieder
21 September 2017 19:29
coronafina
Sehr schnelle Lieferung, Top Ware.
6 December 2020 10:17
Wolfgang G
Gute Qualität
14 March 2020 21:45
soaphero1107
Super verpackt, schneller Versand, gerne wieder!
3 April 2017 22:30
getawayfan
Fast shipping, item as described. All OK.
15 July 2021 07:18
Christian H
Sehr schneller Versand , super digitale Bereitstellung der Dokumente.
- Do I need longer screws or can the old ones remain in place?
With Epytec camber correction plates, you can continue to use the original screws up to +-2°. For camber correction plates with an angle of more than 2°, we recommend lightly sanding a washer and placing it under the screw head to ensure it remains flush with the camber correction plate. Of course, if the camber correction plate is thicker, new screws may be required.
- Does the ABS still work after installing the camber adjustment plate?
From a camber of 1 °, the ABS sensor may no longer be parallel to the ABS ring. Then, the position of the ABS sensor on the vehicle should be slightly changed.