Opel Kadett C Coupe Manta Ascona 16V C20xe Brake caliper Caliper Adapter Front axle brake disc system
- ✓ False crossing is also included + find out the discs
€181.05*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Full adaptation/fixation kit for ventilated 16V brake system (calipers and discs)coming originally from Kadett E Calibra Vectra A Astra GSI /16V C20XE for installation on front axle of the following cars:
- Kadett C Limo Coupe and City
- Manta B
- Ascona B
Advantages:
- Best possible deceleration values and performance, also indispensable for performance increases
- Centering and screws for GSi brake disc available
- Internally ventilated brake discs, no more overheating and fading.
- 14 inch rims can be driven
- Components come from series production by Opel and are easy to obtain
- If installed correctly, registration with the TÜV is possible.
Our adaptation plates need to be installed between the original fixation of the brake disc an the brake disc on the wheel hub.This allows to maintain the width of the wheel lane.There is a centering for the GSI brake disc on the adapters.
Rectifications needed for the execution of the conversion:
- a steering stopper needs to be installed.
- the centering of the brake disc needs to be modified 70,1 mm on the mesure of our adapter plate (also made by EPYTEC)
Scope of delivery:
- 2x adapter plates completely galvanized
- 8x high-strength screws to mount the brake disc, these must be shortened so that the full thread of the wheel hub can be used
- material certificate
For the rear axle brake system on we suggest a conversion set from our shop.
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can not answer generally, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want.
Click here to go to the >> configure steel braided brake lines << - Always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
20 April 2023 06:17
Walter L
Super Kontakt gerne wieder!!!
9 May 2018 17:19
Peter S
Paßform super, wie immer gut zu erreichen
13 October 2023 12:07
Andy V
Fast delivry and everything is oke
9 July 2018 14:25
Guido B
Alles Gut!Schnelle Lieferung!Produkt wie beschrieben. Gerne wieder
7 August 2018 18:10
Berthold B
Alles gut wie immer
5 January 2020 10:29
Peter S
Immer super schnell, passt supergut. Sehr zu empfehlen und ich werde wieder kaufen.
11 July 2020 07:21
Stefan B
Würde den Artikel jederzeit Weiterempfehlen.
11 June 2022 22:31
Valeria R
Alles Gut -
23 March 2023 07:51
Arnaud R
Good product
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ 260x10
- ✓ 57mm centering
- ✓ 69mm height
- ✓ Registration-free
- ✓ Yellowstuff sports surface
- ✓ temperature up to 900°C
- ✓ Brake force regulator Infinitely variable
- ✓ Perfectly adjustable braking effect
- ✓ suitable for all vehicles
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ Registration-free
- ✓ Greenstuff sports surface
- ✓ temperature up to 650°C
- ✓ Registration-free
- ✓ Redstuff ceramic covering
- ✓ temperature up to 750°C
- ✓ 260x10
- ✓ 57mm centering
- ✓ 69mm height
- ✓ brake discs pitch circle diameter / bolt circle / drilling hub bore hole custome-made
- ✓ additional 2nd hole circle / pitch circle drilled in the brake disc
- ✓ turn hub diameter up
- ✓ Opel Kadett C Manta Ascona B
- ✓ made of high-quality stainless steel
- ✓ anchor plate
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
