Mercedes Benz SLK 55 AMG Brake System 360x32 AMG Performance Brake Caliper Adapter 6-piston
- ✓ 360x32 2094210112 Mercedes SLK 55 AMG brake disc
- ✓ 6-piston 208885041A / 208885031A Mercedes SLK 55 AMG brake caliper
- ✓ front axle
Brake caliper adapter, front alxe, on models Mercedes Benz SLK 55 AMG, for conversion to the Mercedes Benz SLK 55 AMG Performance 6-piston brake calipers, combimed with the 360x32mm brake discs.
Since the original mounting brackets are not available individually, they are extremely expensive. With our adapter kit you can install the performance brake system plug and play.
Advantages of this brake system:
- top deceleration, without comparison with conventional brake discs
- easy assembly
- better performance
- supplied material certificate
- can easily be restored to the original state
Required components:
- brake caliper: Mercedes SLK 55 AMG Performance 6-piston, reference 20.8885.041A / 20.8885.031A
- brake disc: Mercedes SLK 55 AMG black series, front, 360x32mm, reference 209 421 0112
Delivery:
- 2x brake caliper adapters for Mercedes Benz SLK 55 AMG
- complete screw kit
- material certificate
- installation instructions
Tipps, Infos und Hinweise:
- Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
- Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
- Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.
>> Jetzt direkt zu Spurverbreiterungen nach Wunsch << - Den Adapter mit den benötigten Komponenten zu verbauen um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.
Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren <<
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
8 March 2020 17:14
Frank T
Passte auf Anhieb ohne technische Probleme.
25 November 2023 21:15
Oasis H
Hello everybody, I think the brake adapter kit is very well designed and beautifully built. For a car that was not a black series, my SLK55 Amg was able to receive the larger SLK55 amg series brake's. Given with that, I was able to have more confidence in the power that my SLK55 Amg produces, my car is super charged and is a lot faster than what had came from the factory. Originally the car comes with 355 hp, my car is making double over 700 hp with a Whipple supercharger. So this is a well spent hardware upgrade. And I would advise anybody with an SLK55 Amg to do the same, brakes are very important. Dont lose your car because of it.
24 March 2020 08:20
Frank T
hat alles reibungslos funktioniert. ;)
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ to configure yourself
- ✓ with TÜV certificate
- ✓ best quality