Which brake pads should be used?

The original brake pads from the brake caliper, which is required for our conversion kit, must always be used.

Can I use other brake calipers as indicated in the required components?

No, unfortunately that is not possible, the reason being that all brake calipers have different height and depth measurements. If another brake disc is installed, the brake caliper would either not fit the adapter at all or not run centrally to the brake disc. If you want to install a different brake caliper, we also have an option for you. You can have a custom-made product manufactured, check out the following link for more information:

Can I also use other discs as specified in the required components?

No, unfortunately that is not possible. The reason is simply that all brake calipers have different height and depth measurements. If a different brake disc is installed, the brake caliper would either not fit on the adapter at all or would not be centered with the brake disc. However, if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product produced, have a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

My brake caliper is not exactly centered over the brake disc - what should I do?

If your brake caliper is not exactly centered over the brake disc, in most cases it is not a problem. Depending on the vehicle, model year, and mileage, axle tolerances can occur – and this even in newer vehicles.The most important thing is:👉 The brake caliper must have sufficient clearance on the left and right to the brake disc so that nothing rubs or permanently touches it.Many brake calipers also have locking bolts. It may happen that:there is very little clearance on one side or the bolt lightly toucheswhile on the other side there is more playThis is generally not critical.🔧 This is how you proceed:Install brake pads:First check if the brake pads can be inserted cleanly and without resistance on both sides.If everything fits:If installation is possible without problems, you can simply gently push back the locking bolts – this usually resolves the issue.If it jams:If the brake pads cannot be installed, or only with difficulty, on one side, action is required.In this case, you can:slightly shim the adapter with suitable bushings to adjust the brake caliperor – depending on the situation – slightly mill the adapter so that the brake caliper is correctly centered again👉 The goal is always that the brake caliper is evenly aligned with the brake disc and the brake pads are seated freely and cleanly.

Mercedes Benz C63 W204 205 A205 C204 Brake System 390x36 AMG Brake Caliper Adapter 6-piston

Name: Mercedes Benz C63 W204 205 A205 C204 Brake System 390x36 AMG Brake Caliper Adapter 6-piston
Brand: EPYTEC
SKU: 890
Price: 183.06 GBP
Availability: OutOfStock
Rating: 5.0 (10 reviews)

£183.06*

Prices incl. VAT plus shipping costs

11 Reviews

Available again on 23.07.2026

Product number: 890

Lieferung ab Thursday, 23.07.2026, bestelle jetzt um es zwischen dem 24.07.2026 und 27.07.2026 zu erhalten.

Notify me when available

This product is currently out of stock. Enter your email address to be notified when the product becomes available again.

Express shopping
Save your data and settings
Order overview and shipping information
Manage your newsletter subscription
19 Jahre Expertenwissen

Product information "Mercedes Benz C63 W204 205 A205 C204 Brake System 390x36 AMG Brake Caliper Adapter 6-piston"

Brake caliper adapter on Mercedes Benz C63 W204 / W205, Coupe C63 AMG C204 / C205, Cabriolet C63 AMG A205, T-Model C63 AMG S204 / S205, front axle, for conversion to the Mercedes Benz C63 W204 AMG brake discs, 390x36, combined with the Mercedes Benz 6-piston brake calipers.

At last an adapter to upgrade from the original 360mm to the 390mm disc of the AMG. Since you do not get the original brackets individually, they are extremely expensive.. With our adapter kit you can install the 390mm disc Plug and Play.

Advantages of this brake system:

top deceleration, without comparison with conventional brake discs
easy assembly
better performance
supplied material certificate
can easily be restored to the original state

The adapter is compatible with the following vehicles:

Mercedes Benz C63 AMG W204 / W205
Mercedes Benz Cabriolet C63 AMG A205
Mercedes Benz Coupe C63 AMG C204 / C205
Mercedes Benz T-Model C63 AMG S204 / S205

Required components:

Both brake caliper and brake disc variants can be used in this conversion – giving you complete flexibility in your component selection. A particular advantage is that we can also offer the AMG 6-piston brake caliper from the W204 (click here), which significantly simplifies the conversion process.

Brake calipers:
- Mercedes CLS 63 AMG (C218) 6-piston brake calipers – Part numbers: A2044214798 and A2044214898
- Mercedes AMG 6-piston brake calipers (W204) – Part numbers: A4634205100, A4634205200, 20.9553.01, 20.9553.02

Brake discs:
- Mercedes CLS 63 (C218) front axle – 390x36 mm, Part number: A2304211212
- Mercedes AMG C63 S (S205) front axle – 390x36 mm, Part number: A2314211812

Delivery:

2x brake caliper adapters for Mercedes Benz W204 C63
high-strength screw material
material certificate
installation instructions

We provide a TÜV certificate with this adapter. This means that the TÜV inspector can easily register the adapter.

FAQ: Häufige Fragen

Sollte ich die Anker- bzw. Staubbleche entfernen?

Wir empfehlen das Entfernen der Bleche, da sie die Belüftung einschränken. Ohne diese Barriere wird die Bremse effizienter gekühlt und bleibt auch bei starker Beanspruchung leistungsfähig.

Wie erleichtere ich mir die Felgenmontage?

Mit Radmontagehilfen gelingt das Ausrichten und Aufsetzen der Felge einfacher und präziser. Das schützt Gewinde und Felge und spart Zeit.

Radmontagehilfe ansehen

Benötige ich Spurverbreiterungen nach dem Umbau?

Welche Felgengröße passt, lässt sich pauschal nicht sagen. Streift die Felge minimal am Bremssattel, schaffen Spurverbreiterungen den nötigen Abstand.

Spurverbreiterungen ansehen

Brauche ich neue Bremsleitungen?

Für optimale Passform und stabile Bremswirkung empfehlen wir Stahlflex. Diese sind konfigurierbar und liefern konstantere Ergebnisse als Gummileitungen.

Stahlflex konfigurieren

Warum unsere Adapter die beste Wahl sind

Wusstest du, dass sich dein EPYTEC-Adapter oft schon nach dem ersten Verschleißteilwechsel komplett bezahlt macht?

Das liegt daran, dass du mit unseren Adaptern auf OE-Bremsscheiben und -Sättel setzt, die wir bewusst bei der Entwicklung der Adapter ausgewählt haben. Diese Komponenten sind nicht nur in höchster Qualität gefertigt und in Serienfahrzeugen im Einsatz, sondern durch ihre Großserienproduktion auch günstig und jederzeit verfügbar.

Für dich bedeutet das: erstklassige Bremsleistung ohne Abhängigkeit von teuren Speziallösungen anderer Hersteller.

Und selbst beim TÜV hast du es leichter, denn unsere OE-Komponenten sind bereits offiziell abgenommen – der Prüfer kann sich direkt darauf beziehen, sodass deine Eintragung unkompliziert und sicher abläuft.

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Brake caliper hole spacing: 256

Hole spacing steering knuckle: 130

Manufacturer: Epytec

Mounting location: front

Motor	Motorcode
C 63 AMG	C204\|487PS(358KW)
C 63 AMG	C204\|507PS(373KW)
C 63 AMG	C204\|517PS(380KW)
C 63 AMG	C204\|457PS(336KW)
AMG C 63 S	C205\|510PS(375KW)
AMG C 63	C205\|476PS(350KW)

Motor	Motorcode
C 63 AMG	W204\|487PS(358KW)
AMG C 63	W205\|476PS(350KW)
C 63 AMG	W204\|457PS(336KW)
AMG C 63 S	W205\|510PS(375KW)

Motor	Motorcode
AMG C 63 S	A205\|510PS(375KW)
AMG C 63	A205\|476PS(350KW)

Motor	Motorcode
C 63 AMG	S204\|487PS(358KW)
AMG C 63 S	S205\|510PS(375KW)
C 63 AMG	S204\|457PS(336KW)
AMG C 63	S205\|476PS(350KW)

Motor	Motorcode
C 63 AMG	C204\|487PS(358KW)
C 63 AMG	C204\|507PS(373KW)
C 63 AMG	C204\|517PS(380KW)
C 63 AMG	C204\|457PS(336KW)
AMG C 63 S	C205\|510PS(375KW)
AMG C 63	C205\|476PS(350KW)

Motor	Motorcode
C 63 AMG	W204\|487PS(358KW)
AMG C 63	W205\|476PS(350KW)
C 63 AMG	W204\|457PS(336KW)
AMG C 63 S	W205\|510PS(375KW)

Motor	Motorcode
AMG C 63 S	A205\|510PS(375KW)
AMG C 63	A205\|476PS(350KW)

Motor	Motorcode
C 63 AMG	S204\|487PS(358KW)
AMG C 63 S	S205\|510PS(375KW)
C 63 AMG	S204\|457PS(336KW)
AMG C 63	S205\|476PS(350KW)

Brake Caliper Adapter Audi A6 S6 C4 Audi 100 HP2 Suspension Adapter Porsche Cayenne ZR18 ZL18 Brake Caliper

✓ 350x32 1644211412 Mercedes brake disc
✓ 6-piston 95535142153 / 95535142253 Porsche Cayenne Z18 brake caliper
✓ front axle

£133.45*

Product number: 929

Mercedes Benz C63 W204 205 A205 C204 Brake System 390x36 AMG Brake Caliper Adapter 6-piston

Notify me when available

Product information "Mercedes Benz C63 W204 205 A205 C204 Brake System 390x36 AMG Brake Caliper Adapter 6-piston"

Advantages of this brake system:

The adapter is compatible with the following vehicles:

Required components:

Delivery:

FAQ: Häufige Fragen

Sollte ich die Anker- bzw. Staubbleche entfernen?

Wie erleichtere ich mir die Felgenmontage?

Benötige ich Spurverbreiterungen nach dem Umbau?

Brauche ich neue Bremsleitungen?

Warum unsere Adapter die beste Wahl sind

Login

Mercedes-Benz

C-Klasse Coupe

C-Klasse

C-Klasse Cabriolet

C-Klasse T-Model

Passendes Zubehör zusammen kaufen und sparen