Brake systems KIT VW Corrado Golf 2 3 Passat VR6 ZR18 Brake caliper adapter 334x32mm Brake disc

✓ 334x32 1J0615301A 1J0615302A Golf 4 R3 brake disc
✓ 6-piston 95535142150 / 95535142250 Porsche Cayenne/ VW Tuareg brake caliper
✓ front axle

€1,506.38*

Available

Product number: 471-KIT-RAL3001

Delivery by Tuesday, 26.11.2024 if you order within the next 0 Hour.

Brake caliper color

Blank without color

Painted in the color of your choice

Red with Epytec logo

Product number: 471-KIT-RAL3001

Weight: 38.137 kg

Bremssatteltyp: Z18 6-Kolben

Einbauort: vorne

Your benefits

Easy TÜV registration
Quality Made in Germany
Fair prices without middlemen you buy directly from the manufacturer and developer of the product
Worldwide no. 1 in tuning adapters
15 years expert knowledge
10 years warranty

With our high-performance brake system kit for the Golf VR6 Corrado VR6 Passat 35i VR6 and many other cars, you can convert your front axle to a 6-piston brake system and achieve ideal performance.

With this high performance brake system kit you can use the Porsche ZR18 ZL18 6-piston Brembo calipers in combination with the 334x32 mm brake discs from Golf 4 R32 on the Golf VR6, Corrado VR6 and many other cars

Another advantage of our brake system kit is that it is equipped with the same original brake calipers and brake discs that are installed in series-production cars. These OE parts not only make replacing the brakes simple and uncomplicated, but also facilitate registration with the TÜV.

The brake system kit is not only sporty, but also suitable for everyday use and, thanks to the perforated sports brake discs in conjunction with our ceramic lining, enables ideal performance while reducing brake dust, temperature and wear.

With this high-performance brake kit, you can get started straight away and have everything you need to convert your front axle to a 6-piston brake system.

The high performance brake kit is suitable for the following cars::

Golf VR6
Corrado VR6
Passat 35i VR6

Advantages of this brake system:

our components, such as brake callipers and brake discs, come from series-production cars and are OE parts. This makes the replacement of the brakes simple and uncomplicated and facilitates the registration with the TÜV.
The material certificate included in the scope of delivery enables registration by individual acceptance even for series-production cars.
High-performance brake pads with longer service life than the original pads
extreme deceleration values also in combination with our rear axle brake system
directly fitting to the above mentioned models and therefore easily rebuildable to original condition at any time
our EPYTEC brake caliper adapters require no sending in of your stock parts, no re-welding, re-milling or re-drilling.

Note :

The kit includes new brake calipers with Epytec logo as standard. For an additional charge, we can also supply the brake calipers in the colour of your choice and without the logo, in which case the delivery time is about 2-3 weeks longer.

Get our high-performance brake system kit now and experience ideal performance and durability.

Also suitable for many other cars due to the installation of the VR6 plus axle.

Scope of delivery:

2x new Porsche Cayenne brake calipers ZR18 /ZL18 part number: 955.351.421.50 / 955.351.422.50 ( left / right ) including complete new brake caliper mounting bracket kit.
matching set of EBC Sport brake discs Turbo Groove 334x32mm
2x ceramic brake pads for less brake dust and longer lifetime
2x brake caliper adapter for Golf VR6,Corrado VR6,Passat 35i
2x matching steel braided lines
Assembly aid for brake disc assembly
high strength bolt material
Material certificate
Template to check whether the brake system fits under your rim
Stress analysis / FEM calculation for registration

Tips, information and advice:

To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

We provide a TÜV certificate with this adapter. This means that the TÜV inspector can easily register the adapter.

Technical data:

Bremssatteltyp: Z18 6-Kolben

Einbauort: vorne

Bremssatteltyp: Z18 6-Kolben

Einbauort: vorne

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

email address

password

or Register with...

Quick login with

No reviews found. Share your insights with others.

Questions? Click here for the contact form

Brake systems KIT rear axle Golf 1 2 3 Caddy 14D Jetta Porsche Cayenne 4-piston caliper VW Golf 4 R32 handbrake caliper 310x22 brake disc

✓ 310x22 3D0615601D VW Phaeton brake disc
✓ 4-piston 996352421 / 996352422 Porsche 996 brake caliper
✓ rear axle

€1,571.30*

Item number: 1148-KIT