Brake calliper adapter BMW M models E92 E93 E91 E90 4-piston brake calliper 380x28 ceramic steel brake system BMW M2 M3 M4
£164.02*
Brake caliper adapter for the rear axle of the BMW M models E92 E93 E91 E90 and many more to install the BMW steel sports brake from the BMW M2 or the ceramic brake from the BMW M3 / M4.
Suitable for the following vehicles:
- BMW E90 M3
- BMW E91 M3
- BMW E92 M3
- BMW E93 M3
- BMW E82 M 1er
Advantages of this brake system:
- Top deceleration values, no comparison with conventional rear brake discs
- Significantly improved fading due to internally ventilated discs
- a must for performance upgrades
- the material certificate included in the scope of delivery enables registration via individual approval, even for standard vehicles.
- Easy to restore to original condition
Components required for installing the carbon-ceramic brake system:
- BMW Performance 4-piston brake callipers from BMW M3 M4, part no. 34217850465 / 34217850466
- Brake pads from BMW M3 M4, part no. 34212284990
- Brake disc from BMW BMW M3 M4 from the rear axle in 380x28mm part number: 34212284807 / 34212284808
Components required for the installation of the steel brake system:
- BMW Performance 4-piston brake callipers from BMW M2, part no. 34218745797 / 34218745798
- Brake pads from BMW M2, part no. 34218091600
- Brake disc from BMW BMW M2, from the rear axle in 380x28mm, part number: 34118072019 / 34118072020
Scope of delivery:
- 2x brake calliper adapter for BMW M models E92 E93 E91 E90 E82 and many more.
- High-strength fastening screw material
- Material certificate
Tipps, Infos und Hinweise:
- Zur besseren Belüftung der Bremsanlage empfehlen wir die Ankerbleche/Bremsstaubbleche zu entfernen.
- Für eine einfache Montage der Felge, empfehlen wir, zwei unserer Radmontagehilfen gleich mit zukaufen >>hier gehts direkt zum Artikel<<
- Welche Felgengröße du nach deinem Bremsenumbau fahren kannst, können wir pauschal nicht beantworten. Es gibt einfach zu viele unterschiedliche Felgen. Es kann in seltenen Fällen vorkommen, dass die Felgen am Bremssattel minimal anliegt, dann können einfach Spurverbreiterungen verwendet werden.
>> Jetzt direkt zu Spurverbreiterungen nach Wunsch << - Den Adapter mit den benötigten Komponenten zu verbauen, um anschließend zu prüfen, ob ggf. neue Bremsleitungen benötigt werden, da es je nach Modell sein kann, das die alten nicht lang genug sind, oder vom Anschluss her nicht passen. Wir empfehlen durch den deutlich besseren Wirkungsgrad auf Stahlflexleitugen zu wechseln, eigens für diese Funktionsweise haben wir dafür einen Stahlflexkonfigurator entwickelt, indem du diese nach deinen Wünschen zusammenstellen und anschließend verlegen kannst.
Hier geht’s zum Stahlflexkonfigurator >> Stahlflex-Bremsleitung konfigurieren << - Das Handbremsseil muss immer vom verbauten Sattel verwendet werden, das heißt, es kann sein, dass das neue Handbremsseil noch etwas angepasst werden muss. Bei Umbauten in dem der Original Sattel weiterverwendet wird und das Original Handbremsseil verwendet werden kann, kann es sein, dass du es auf direkterem Weg verlegen musst um den größeren Scheibendurchmesser und den längeren Weg auszugleichen
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
Motor | Motorcode |
---|---|
M3 CRT | E90|450PS(331KW) |
M3 | E90|420PS(309KW) |
Motor | Motorcode |
---|---|
M3 | E92|420PS(309KW) |
M GTS | E92|450PS(331KW) |
Motor | Motorcode |
---|---|
M | E82|340PS(250KW) |
Motor | Motorcode |
---|---|
M3 | E93|420PS(309KW) |
Motor | Motorcode |
---|---|
M3 CRT | E90|450PS(331KW) |
M3 | E90|420PS(309KW) |
Motor | Motorcode |
---|---|
M3 | E92|420PS(309KW) |
M GTS | E92|450PS(331KW) |
Motor | Motorcode |
---|---|
M | E82|340PS(250KW) |
Motor | Motorcode |
---|---|
M3 | E93|420PS(309KW) |