Brake Caliper Adapter Rear Axle Audi A4 S4 B5 Audi S4 B7 Brake Disc 300x22
- ✓ 300x22 8E0615601K Audi S4 B7 brake disc
- ✓ 1-piston 8D0615423D / 8D0615424D RS4 B5 brake caliper
- ✓ rear axle
€107.56*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Brake caliper adapter for rear axle of Audi A4/S4, combined with the RS4 B5 brake calipers and brake discs from Audi S4 B7.
Suitable for the following vehicles :
- Audi A4 B5
- Audi S4 B5
Advantages of this brake system:
- discs are cheap, also in our shop
- high deceleration
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling.
Required components:
- brake discs: Audi S4 B7 300x22 mm , reference 8E0615601K
- Brake calipers and caliper brackets must be those of the RS4 B5
Delivery:
- 2x brake caliper adapters
- high-strength mounting screws
- material certificate
rims: at least 17 inch
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
31 December 2018 16:45
Matthias B
Sitzt, passt... TOP!
27 April 2018 12:16
speedaudi1.8t
Alles super alles bestens gerne wieder
17 September 2018 18:17
newholland7040
Super schnelle Lieferung alles top gerne wieder
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ fall negative
- ✓ 5mm thickness
- ✓ suitable for Audi 80 100 A4 A6
- ✓ 365x34 8E0615301AB Audi RS4 brake disc
- ✓ 8-piston 8E0615107 / 8E0615108 Audi RS4 B7 brake caliper
- ✓ front axle
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ 356x32 420615602F Audi R8 brake disc
- ✓ 4-piston 209815 / 42615405 Audi R8 brake caliper
- ✓ front axle
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Desired dimensions
- ✓ Quickly configurable
- ✓ Length, color and connections freely selectable
- ✓ Brake force regulator Infinitely variable
- ✓ Perfectly adjustable braking effect
- ✓ suitable for all vehicles
- ✓ 300x22
- ✓ 68mm centering
- ✓ 36mm height
- ✓ Registration-free
- ✓ Blackstuff Ultimax brake pads
- ✓ temperature up to 400°C
- ✓ 300x22
- ✓ 68mm centering
- ✓ 36mm height
- ✓ 300x22
- ✓ 68mm centering
- ✓ 36mm height
- ✓ 300x22
- ✓ 68mm centering
- ✓ 36mm height
- ✓ 300x22
- ✓ 68mm centering
- ✓ 36mm height
- ✓ 5x112 bolt circle
- ✓ Plug & Play
- ✓ Audi A4
- ✓ Audi engines
- ✓ 240 clutch
- ✓ lightens 8.6 kg
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track