Audi S4 RS4 A6 Passat W8 Brake Caliper Adapter 4-piston Brake Caliper Ceramic Brake Disc 356x32mm Audi R8
- ✓ 356x32 420615602F Audi R8 brake disc
- ✓ 4-piston 209815 / 42615405 Audi R8 brake caliper
- ✓ front axle
€216.77*
- Easy TÜV registration
- Quality Made in Germany
- Fair prices without middlemen you buy directly from the manufacturer and developer of the product
- Worldwide no. 1 in tuning adapters
- 15 years expert knowledge
- 10 years warranty
Suitable for the following vehicles with wheel bearing housing 4B3 407 258 A / 257 A:
- Audi A4 (8D5, B5)
- Audi S4 (8D5, B5)
- Audi RS4 RS5 B5 Quattro station wagon
- Audi A6 ( 4B C5 )
- VW Passat W8 ( 3B3 )
- VW Passat Variant ( 3B6, B5 )
Advantages of this brake system:
- high deceleration, also in conjunction with our rear axle braking system
- thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles
- directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems
- our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling
Required components:
- brake caliper: 4-piston Audi R8, reference 209815 / 42615405
- brake disc: original Audi R8 ceramic 356x32 mm, reference 420.615.602F
Delivery:
- 2x brake caliper adapters for Audi S4, RS4, A6, VW Passat W8
- high-strength screw material
- material certificate
Tips, information and advice:
- To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
- For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
- We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
- Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
- The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:
- ✓ Length: 43cm
- ✓ M10x1 curved on the outside
- ✓ M10x1 straight on the inside
- ✓ 330x22 4F0615601B Audi A6 brake disc
- ✓ 4-piston 955352421 / 955352422 Porsche Cayenne brake caliper
- ✓ rear axle
- ✓ to configure yourself
- ✓ with TÜV certificate
- ✓ best quality
- ✓ 335x22 4E0615601L 240122-02141 Audi A8 brake disc
- ✓ original brake caliper
- ✓ rear axle
- ✓ optimized paste for brake systems
- ✓ correct viscosity
- ✓ no squeaking
- ✓ 300x22 8E0615601K Audi S4 B7 brake disc
- ✓ 1-piston 8D0615423D / 8D0615424D RS4 B5 brake caliper
- ✓ rear axle
- ✓ Racing brake fluid
- ✓ Reduction in brake fading
- ✓ improved pedal feel
- ✓ Significantly higher boiling point
- ✓ Better pedal feel
- ✓ Suitable for the race track
