VW Golf 5 6 Plus Audi A3 Jetta Seat Leon Altea Bremssatteladapter 360x32 Scheibe Audi RS4 B5 Brembo 8-Kolben Bremssattel Audi RS5 Bremsanlage

✓ 360x32 8D0615302B Audi RS4 B5 brake disc
✓ 8-piston 8E0615107 / 8E0615108 RS4 Audi RS4 RS5 brake caliper
✓ front axle

€209.87*

Available

Product number: 1066

Delivery by Thursday, 07.11.2024 if you order within the next 2 Hours.

Product number: 1066

Weight: 2.458 kg

Einbauort: vorne

Your benefits

Easy TÜV registration
Quality Made in Germany
Fair prices without middlemen you buy directly from the manufacturer and developer of the product
Worldwide no. 1 in tuning adapters
15 years expert knowledge
10 years warranty

Bremssattel Adapter für die Vorderachse der die VW Golf 5, 6, Touran, Audi A3 8P, Seat Leon uvm. auf die Audi RS4 RS5 8-Kolben Brembo Bremssättel in Verbindung mit den Audi RS4 B5 360x32 mm Bremsscheiben.

Die Adapter passen für folgende Fahrzeuge mit Stahlachsschenkel:

Audi A1 S1 quattro 8X1
Audi A3 8P1
Audi A3 Sportback 8PA
Audi TT 8J3
Seat Altea 5P1
Seat Leon 5F1
VW Caddy III Großraumlimosine 2CB
VW Caddy III Kasten 2CA
VW Golf Plus 521
VW Golf V 1K1
VW Golf V Variant 1K5
VW Golf VI 5K1 517
VW Golf VI Cabriolet 517
VW Golf VI Variant AJ5
VW Jetta IV 162
VW Scirocco 137
VW Touran 1T3
VW Touran 5T1

Passend bei allen aufgeführten Fahrzeugen die einen Stahlachsschenkel verbaut haben (nicht passend bei Fahrzeugen mit Aluachsschenkel)
Es kann sein, dass Lenkeinschlagbegrenzer für kompletten Lenkeinschlag verbaut werden müssen, diese findest du unten im passenden Zubehör.

Vorteile dieser Bremsanlage:

extreme Verzögerungswerte auch in Verbindung mit unsere Hinterachsbremsanlage
durch das im Lieferumfang enthaltene Materialzertifikat kann eine Eintragung per Einzelabnahme auch bei Serienfahrzeugen ermöglicht werden.
direkt passend an oben genannte Modelle und daher jederzeit problemlos wieder in den Originalzustand rückrüstbar
unsere EPYTEC Bremssattel Adapter erfordern keine Einsendung von Ihren Serienteilen, kein Umschweißen - Umfräsen oder Umbohren.

Benötigte Komponenten:

Audi RS4 RS5 8-Kolben Original Brembo Bremssättel Bremssattel links Teile Nr: 8E0615107 Bremssattel rechts Teile Nr: 8E0615108
Bremsscheibe: Audi RS4 B5 360x32 mm T.-Nr. 8D0615302B oder RS4 B7 Bremsscheibe 365x34mm Teilenummer 8E0615301AB
( wenn die 365 Scheibe verbaut wird, muss an der Bremssattelaufnahme unterlegt werden, damit die Bremsscheibengröße ausgeglichen wird. )

Lieferumfang:

2x Bremssattel Adapter VW Golf 5 6 Audi A3 Baureihe
Materialzertifikat
hochfestes Schraubenmaterial

Tips, information and advice:

To improve ventilation of the brake system, we recommend removing the anchor plates/brake dust plates.
For easy mounting of the rim, we recommend purchasing two of our wheel mounting aids at the same time >>go directly to the article here<<
We cannot give you a generalised answer as to which rim size you can ride after your brake conversion. There are simply too many different wheel rims. For this reason, we have developed a template with which you can easily check whether the brake system kit fits under your rim. We have included a link to the template in the description. If your rim does not fit, you can simply use wheel spacers. >> Go directly to customised wheel spacers <<
Install the adapter with the required components and then check whether new brake lines are required, as the old ones may not be long enough or the connection may not fit, depending on the model. Due to the significantly better efficiency, we recommend switching to steel braided lines. We have developed a steel braided line configurator especially for this function, which you can use to assemble and then install them according to your requirements. Click here for the steel flex configurator >> Configure steel flex brake line <<
The handbrake cable must always be used from the installed calliper, which means that the new handbrake cable may have to be adjusted slightly. For conversions in which the original calliper is still used and the original handbrake cable can be used, you may have to route it more directly to compensate for the larger disc diameter and longer travel

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Technical data:

Einbauort: vorne

0 of 0 reviews

Leave a review!

Share your experiences with other customers.

Login

Your email address

Your password

No reviews found. Share your insights with others.

Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

Questions? Click here for the contact form