You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT

Thin Short Drive Shaft Right VW Golf MK4 Bora 1.8T V5 Audi A3 8L 108er

€276.73*

Available
Delivery by Tuesday, 30.04.2024 if you order within the next 10 Hours.
Repeated order: check settings carefully and change if necessary.
   maximum characters = 18, rest = 18
Price calculation
Pricebox
NameTitleSurcharge
Chassis number:  
* Configuration is incomplete - please check it!
Product number: APA168
Weight: 5 kg

Fine thin drive shaft for many models VW VW Golf 4, Bora 1.8T V5 and Audi A3 Modelle with 108 flange. Absolutely necessary when lowering! The shaft are 26mm thick, made of high-strength steel and manufactured in one piece and is a complete drive shaft. Thus also suitable for high-performance engines.

Thanks to our thin and extremely stable transmission / drive shaft, you avoid many problems at the body that usually appear during a chassis lowering. With the installation of our drive shaft, you avoid many modifications and you save time.

It is important that when installing the new drive shaft, no excess pressure is created in the sleeve. In our installation instructions you can see how to prevent this (click here).

By installing the thinner drive shaft, you save yourself having to rework the body. This saves you time and nerves.
Suitable for vehicles with a fender edge under 32cm. Are you at the fender edge over 32cm you need this drive shaft (click here)

Article data:

assembly side front axle right
length 804 mm
thread M20x1.5
external toothing wheel side 36
sealing ring diameter 53 mm
drilling-Ø 10,5 mm
number of holes 6
for shaft diameter 28 mm
Bolt circle Ø 94 mm
joint diameter wheel side 90 mm
Joint diameter on the transmission side 108 mm
chassis for vehicles with low-profile chassis
manufacturer release SPECIAL PARTS

Delivery:

  • 1x fine thin drive shaft for VW Golf MK4, Bora 1.8T V5, Audi A3 8L with 108th. flange
Our drive shafts are registration-free and therefore do not have to be registered.

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

4 of 4 reviews

4.75 out of 5 stars


75%

25%

0%

0%

0%


Leave a review!

Share your experiences with other customers.


7 October 2023 08:54

Timon K

Artikel ist wie beschrieben. Zügige Lieferung. Und vor allem kann ich endlich tief fahren!!!😂👍

12 June 2020 16:31

Bedrihan K

Einfach perfekt. Hätte nie gedacht mir reicht viel Luft mit der Welle zu verschaffen, jetzt kann ich endlich schön tief fahren ohne das die Welle am Rahmen schlägt. Versand war super schnell, bin sehr zufrieden. Vielen Dank ans ganze Team.

12 June 2020 14:07

Bedrihan K

Richtig gutes Produkt, hätte nie erwartet wieviel Luft ich mir mit der Welle verschaffe, endlich kann ich tief fahren ohne das die Welle am Rahmen schleift. Einfach nur genial. Dazu kommt das sie super schnell geliefert wurde. Einfach spitze.

20 April 2020 10:31

Marcel H

Top passgenauigkeit schneller Versand und ist jeden zu empfehlen der sein Auto tieferlegt ich war anfangs skeptisch ob es hilft aber jetzt bin ich 1000 Prozent zufrieden das was mich bissel gestört hat war der Preis aber dafür bekommt Mann gute Qualität.

  • What exactly is the point of having a shorter driveshaft?
  • As a result of lowering, the axle geometry changes and the shaft presses against the wheel bearing, exposing it to high levels of wear and, in the worst case, destroying it. It is therefore imperative to depressurize the component. This is done by shortening the trees.

  • Do reinforced driveshafts also have reinforced ball joints ?
  • The wheel-side ball joints are also reinforced, but the inner ball joints are like the standard ball joints.

  • Why are two bags of grease included in the delivery?
  • The grease is included in the scope of delivery so that it can be regreased or if the gearbox flange is open at the rear. In this case, grease must still be applied there. If the shaft is supplied completely closed, no grease is required, as this has already been done. 

  • Why are no shims (OE: 1K0407357D) for the mounting supplied as they are original?
  • We do not supply the shims, as we install the latest version of the bellows. With these, the shims are no longer required.

Passendes Zubehör

Wheel Hubs Golf MK4 Bora Audi A3 TT TTRS RS3 Audi TT Conversion to 5x112 V6 R32 PCD Adapter Front
  • wheel hubs for conversion to 5x112mm Pitch Circle Diameter (PCD) and ABS sensor ring, front axle  on Golf MK 4 Bora Audi A3 TT TTRS RS3 Audi TT models

€150.42*
Artikelnummer: APA121
Thin and Shorter Drive Shaft Left VW Golf MK4 Bora 1.8T V5 Audi A3 8L 108th Flange
  • ✓ thin and shorter drive shaft for VW Golf MK4, Bora 1.8T V5, Audi A3, 8L with 108th flange

€205.68*
Artikelnummer: APA218
Thin drive shaft left VW Golf 4 Bora 1.8T V5 Audi A3 8L 108er Flange
  • ✓ Thin drive shaft left VW Golf 4, Bora 1.8T V5, Audi A3, 8L with 108 flange

€189.89*
Artikelnummer: APA264
Bellows set boots drive shaft spare part wheel side VW Audi Skoda 18877

Spare part for drive shafts for VW Golf 5 6 Audi A3 Skoda and more.

  • ✓ Fitting side: front axle
  • ✓ Fitting side: wheel side
  • ✓ length: 109,0 mm
  • ✓ inner diameter 1: 26,0 mm
  • ✓ Inner diameter 2: 75,0 mm
  • ✓ Material: thermoplastic

€15.57*
Artikelnummer: APA286
You can find out everything about your order via your -> View customer account