Original VW Audi Golf 4 A3 8L Quattro 4Motion Suspension Control Arm Wishbone Rear Axke Bushing Track Adjustement

€107.60*

% €126.59* (15% saved)

Prices incl. VAT plus shipping costs

51 Reviews

Available

Delivery by Wednesday, 08.05.2024 if you order within the next 17 Hours.

Product number: 765

From an order value of €30 your delivery is free inside Germany.

Weight: 3 kg

Einbauort: hinten

Your benefits

Einfache TÜV Eintragung
Qualität Made in Germany
Faire Preise ohne zwischenhandel du kaufst direkt beim Hersteller und Enwickler des Produktes
Weltweit Nr 1 in Sachen Tuning Adapter
15 Jahre Expertenwissen
10 Jahre Garantie

Passendes Zubehör

Thin Fine Drive Transmission Shaft VW Golf MK3 VR6 Syncro Vento Axle Joint

Fine drive / transmission shaft for many VW and Seat models. Absolutely necessary when lowering! The shaft is manufactured in one piece and is a complete drive shaft. Suitable for the following vehicles: Golf MK3 Golf VR6 Golf MK4 Cabrio 1E7 2,0 Vento Polo 9N Thanks to our thin and extremely stable transmission / drive shaft, you avoid many problems at the body that usually appear during a chassis lowering. With the installation of our drive shaft, you avoid many modifications and you save time.It is important that when installing the new drive shaft, no excess pressure is created in the sleeve. In our installation instructions you can see how to prevent this (click here). Technical data: assembly side: front axle right length:; 768,0 mm thread: M20x1.5 drilling-Ø: 8,2 mm PCD-Ø: 86 mm joint diameter, differential side: 100 mm number of drill holes: 6 external toothing wheel side: 36 chassis: for vehicles with low-profile chassis joint diameter wheel side: 90,0 mm Delivery: 1x fine thin drive / transmssion shaft for Golf MK3, Golf MK4, VR6, Vento (with all parts, see picture) Our drive shafts are registration-free and therefore do not have to be registered.

€234.10*

Details

Wishbone Reinforcing Plate Golf MK2 G60 Corrado

Wishbone reinforcing plate for all Golf MK2 / MK3 and Corrado. D The plates can be simply welded on the original wishbones, up and down. The original wishbones will be more stable and robust and the driving of the vehicle is greatly improved.Absolutely also recommended for tuned vehicles. Delivery: 4x wishbone reinforcing plates, complete for 2 wishbones. Suitable for alle Golf MK2, MK3 Corrado

€37.99*

VW Golf Corrado Polo Passat Scirrocco Camber correction plates Camber regolation Rear axle

Geschliffen: 0,5Grad | Camber Direction: Negativ

Product description Correction plates for installation on rear axle. Tailor-made for all VW/Seat vehicles with exception of Syncro/4x4 as: VW: Corrado, Golf 2 +3, Jetta Passat 35i, Scirrocco, Vento, Polo 86c/6n/9n Seat: Cordoba, Ibiza, Toledo Allows a perfect camber adjustment.This guarantees a even consumption of your tires.Recommanded for sporty driving on public road and for any kind of partecipation in races. Technical information: The correction plates are installed between axle and axle tap. Installation is simple and it’s excution doesn’t require much time.The wheel lane widens only 3mm on every side.The degree of tilt of every plate is negativ of 0.5.Any plate typ with different degree of tilt can be delivered upon request. Scope of delivery: 2x Correction plates for camber adjustment,galvanized.With negativ degree of tilt of 0.5 Certificate of material (Proves the conformity of our product in Germany and simplifies authorization by authorities)

€38.09*

Golf MK2 MK3 Camber Adjustment Screw Syncro

Conversion kit to convert the VW Golf MK2 MK3 Syncro rear axle. Adjustement of track and camber. With our conversion kit, you can modify the camber and the track, rear axle, from -3 to +3 degrees. This is ideal for rear lowering and to correct defects, if a tire is worn out only on one side of your vehicle. It is also advisable on racing and slalom circuits. Or simply to take turns at high speed. Functional description: For this conversion kit, it is necessary to make welds on the axle . The provided plates are drilled with an oblong hole. They must be welded to the axle at the point of the suspension arm. Thanks to the oblong holes and eccentric screws, the suspension arm can be adjusted as desired, whilst remaining in the original mounting position. Delivery: 8x plates 4x eccentric screws with washers and nuts Installation instructions material certificate

€151.99*

Wheel Hubs Golf MK2 MK3 Passat Vento Seat Ibiza PCD Adapter to 5x100 Front

Wheel Hubs for conversion to 5x100 PCD for the ffront axle. Who wants to finally convert his VW Golf MK2, MK3, Passat Vento, Seat Ibiza to den 5x100mm PCD, is here just right! Advantages: the VR6 brake system can be mounted rims with 5x100 without spacer plates 100% fitting completely galvanized, therefore best corrosion protection the 5x100mm hubs are equipped with M14x1,5 thread. Thus, the original wheel bolts for the VW and Audi rims can be used is not authorized under the STVO (German Road Licensing Law) However, it is possible to register your purchase even for series vehicles Delivery: 2x wheel hubs with 5 x 100 PCD and M14x1,5 thread material certificate

€205.68*

Wheel Offset Plates Rear Axle Low Profile VW Golf MK2 MK3 Passat Jetta Corrado

Rear axle, wheel offset plates on low profile vehicles. By lowering the vehicle, the axle is no longer in the middle of the wheel house. It is therefore possible that the wheel touches the wheel house. It also affects optics and directional stability.Thanks to our offset plates, which are installed between the axle support and the body, the axle and the wheel are new in the middle of the wheel house. Suitable for the following vehicles (does not fit VR6): Golf MK2 Golf MK3 VW Corrado VW Jetta Seat Toledo Delivery: 2x rear axle wheel offset plates for the mentioned models complete required high strength screw material material certificate

€153.21*

Conversion Kit Drive Shaft Transmission Shaft VW Golf MK4 GTI 1.8T Jubi 6-Speed 02M Lowering

Fine thin drive / transmission shaft (10 mm shorter) with corresponding wheel hubs and wheel bearings for Golf MK4 GTI, Golf MK4 1.8 T Jubi 6-speed 02M 02Q gearbox. Absolutely necessary when lowering! The shaft is made of high-strength steel and manufactured in one piece and is a complete drive shaft. Thanks to our thin and extremely stable transmission / drive shaft, you avoid many problems at the body that usually appear during a chassis lowering. With the installation of our drive shaft, you avoid many modifications and you save time.It is important that when installing the new drive shaft, no excess pressure is created in the sleeve. In our installation instructions you can see how to prevent this (click here). Technical data: assembly side front axle right length 796,0 mm thread M20x1.5 drilling-Ø 10,2 mm PCD-Ø 94 mm joint diameter, gear side 108 mm number of drill holes 6 external toothing wheel side 36 chassis for vehicles with low-profile chassis joint diameter wheel side 98,0 mm Delivery: 1x fine thin drive / transmssion shaft, 1 cm shorter, inclusive axle joint, wheel hub and wheel bearing, for Golf MK4 GTI, Golf MK4 1.8 T Jubi 6-speed gearbox Our drive shafts are registration-free and therefore do not have to be registered.

€276.73*

Details

VW Golf MK4 1.6 16V 1.9 TDI 4motion Audi A3 1.6 Control Arm Suspension Wishbone Left Right Front Axle with Screws

Control arm suspension / wishbone with bushing, axle joint, and screws. Left and right, front axle for Golf MK4 1.6 16V, 1.9 TDI 4 motion, Audi A3 1.6, etc. criteriondetail quantity unit kit steering technics contral arm / wishbone supplementary item / info 2 with lock screw set assembly side front axle lon both sides assembly side bottom required quantity 1 Suitable manufacturer reference numbers:: 1J0 407 151A 1J0 407 151B 1J0 407 151C Delivery: 1x wishbone, left with bushs and axle joint 1x wishbone, right with bushs and axle joint

€103.05*

Audi A3 1.6, Golf 4 1.6 16V, 1.9 TDI 4motion Wishbone Left and Right with Tie / Steering Rods Front Axle

Control arm suspension / wishbone, front axle, and tie / steering rods and screws, for Golf MK4 1.6 16V, 1.9 TDI 4 motion, Audi A3 1.6, etc. criteriondetail quantity unit kit steering technics contral arm / wishbone supplementary item / info 2 with lock screw set assembly side front axle lon both sides assembly side bottom supplementary item / info 2 with tie / steering rods required quantity 1 Suitable manufacturer reference numbers: 1J0 411 315B 1J0 411 315C 1J0 411 315 J Delivery: 1x wishbone, left with bushs and axle joint 1x wishbone, right with bushs and axle joint 2x tie / steering rods

€125.15*

VW Golf MK4 1.6 16V 1.9 TDI 4motion Audi A3 1.6 Control Arm Suspension Wishbone Left Right Front Axle with Steering Bar Track Rod

Control arm suspension / wishbone with bushing, axle joint, steering bar / rod, track rod and screws for Golf MK4 1.6 16V, 1.9 TDI 4 motion, Audi A3 1.6, etc. criteriondetail quantity unit Kit steering technics contral arm / wiscbone supplementary item / info 2 with lock screw set assembly side front axle left assembly side front axle right supplementary item / info 2 with steering rod / bar Steering with track rod end supplementary item / info 2 mit axle joint required quantity 1 Suitable manufacturer reference numbers: 1J0 422 804B 1J0 422 804H Delivery: 1x wischbone, left 1x wischbone, right 2x steering bars / rods 2x track rod ends

€150.42*

Camber Track Correction Plates Camber Track Adjustment VW Golf MK 2 MK3 Syncro Rear Axle

You do not want to spend money on tires that are worn out only on one side, but you want more grip and a better performance'. Then we have the product for you! With this product, you can adjust the camber according to your needs. Conversion kit to convert the VW Golf MK2 MK3 Syncro rear axle. Adjustement of track and camber. With our conversion kit, you can modify the camber and the track, rear axle, from -3 to +3 degree. This is ideal for rear lowering and to correct defects, if a tire is worn out only on one side of your vehicle. It is also advisable on racing and slalom circuits. Or simply to take turns at high speed. Functional description: For this conversion kit, it is necessary to make welds on the axle. The provided plates are drilled with an oblong hole. They must be welded to the axle at the point of the suspension arm. Thanks to the oblong holes and eccentric screws, the suspension arm can be adjusted as desired, whilst remaining in the original mounting position. info: eccentric bolts and nuts are available in our shop. Delivery: 1x plate material certificate A montage description under this link:click here

€14.87*

Supporting Joint Kit Front Axle Adjustment Camber Caster Angle Audi A3 VW Golf MK4 Seat Leon

Multi-part supporting joint kit, front axle, for camber and caster angle adjustment.By replacing the joints, corrections of approx. +/- 1-2 ° can be made. Depending on the setting, an additional lowering of approx. 10-15mm is achieved due to the changed axle geometry. This kit is particularly suitable for air (airride) / coilovers suspension with thread chassis, and for round / slalom circuit. Suitable for the following vehicles: Audi A3 (8L) Seat Leon (1M) Toledo II (1M) Skoda Octavia (1U) VW Bora (1J) / Golf MK4 (1J) / Golf MK4 Variant (1J) New Beetle (9C, 1C) / New Beetle Cabriolet (1Y) Delivery: 1x supporting joint kit (2 parts)

€100.01*

VW Golf MK4 Bora New Beetle Audi A3 8L TT 8N Conversion Kit Front Axle 5x112 Wheel Hubs 312x25mm Brake Discs Brake Pads

Complete 5x112 conversion kit for the front axle of the VW Golf MK4, Audi A3 8L wheel hubs, brake pads and brake discs 312x25mm.If you want to continue using the original brake system, but still want to install 5x112 rims, you have found the right set here. This is probably the best alternative to our bolt/pitch circle adapters, as it does not widen the track. Suitable for the following VW and Audi models: Audi A3 8L Audi TT 8N VW Bora VW Golf MK4 VW New Beetle etc. Vorteile: no bolt/pitch circle adapter necessary easy to use, no re-drilling of the brake discs necessary, etc. wheel arches do not necessarily have to be removed (depending on the installed rim width, of course) Delivery: 1x complete conversion kit for the front axle on the Golf Mk4, Bora, New Beetle, Audi A3, TT with wheel hubs 5x112, brake pads and brake discs 312x25mm material certificate

€292.54*

VW Golf MK4 Bora New Beetle Audi A3 8L TT 8N Conversion Kit Rear Axle 5x112 Wheel Hub 256x22mm Brake Disc Brake Pads

Complete 5x112 conversion kit for the rear axle of the VW Golf 4, Audi A3 8L wheel hubs, brake pads and brake discs 256x22mm.If you want to continue using the original brake system but still want to install 5x112 rims, you have found the right set here. This is probably the best alternative to our bolt circle adapters, as it does not widen the track. Suitable for the following VW and Audi models ( with front-wheel drive) : Audi A3 8L Audi TT 8N VW Bora VW Golf MK4 VW New Beetle etc. Advantages: no bolt / pitch circle adapter necessary Plug & Play use. No drilling of the brake discs. Wheel housings do not necessarily have to be pulled out (of course, depending on the width of the rims installed). Delivery: complete conversion kit for rear axle ( rigid axle ) on Golf 4 with wheel hubs 5x112, brake pads and brake discs 256x22mm material certificate

€260.94*

VW Golf MK4 Bora New Beetle Audi A3 8L TT 8N Conversion Kit Rear Axle 5x112 Wheel Hub 280x22mm Brake Disc Brake Pads

Complete conversion kit 5x112 for rear axle on models VW Golf MK4, Audi A3 8L with wheel hub, barke pads and brake duscs 280x22mm. Who would like to keep the brake system on his first original, but would still like to install 5x112 rims, has found the right kit here.. This is probably the best alternative to our bolt / pitch circle adapters, because the track does not become wider. Suitable for the following VW and Audi models: Audi A3 8L Audi TT 8N VW Bora VW Golf MK4 VW New Beetle etc. Advantages: no bolt / pitch circle adapter necessary directly to use. No drilling of the brake discs. wheel arches do not necessarily have to be removed (of course depending on the width of the rim) Delivery: complete conversion kit 5x112 for rear axle on models VW Golf MK4 with wheel hub, barke pads and brake duscs 280x22mm material certificate

€292.52*

VW Golf 4 Bora New Beetle Audi A3 8L TT 8N conversion kit front axle 5x112 wheel hubs 288x25mm brake discs brake pads

Complete 5x112 conversion kit for the front axle of the VW Golf 4, Audi A3 8L wheel hubs, brake pads and brake discs 288x25mm.If you want to continue using the original brake system, but still want to install 5x112 rims, you have found the right set here. This is probably the best alternative to our bolt circle adapters, as it does not widen the track. Suitable for the following VW and Audi models: Audi A3 8L Audi TT 8N VW Bora VW Golf 4 VW New Beetle and much more Advantages: no bolt circle adapter necessary Plug & Play to use, no re-drilling of the brake discs necessary, etc. Wheel arches do not necessarily have to be pulled (depending on the installed rim width, of course) delivery: Complete conversion kit for the front axle on the Golf Mk4, Bora, New Beetle Audi A3, Audi TT with wheel hubs 5x112, brake pads and brake discs 288x25mm material certificate

€292.52*

2x Bremssattelhalter Bremssattelträger Vorderachse VW Golf 4 Audi A3 Audi TT 288x25mm Bremsscheibe

Zwei neue Bremssattelträger und Bremssättelt für die 288x25mm Bremsanlage an der Vorderachse des Audi A3, TT, VW Golf 4 uvm. Modellen.Die Bremssattelträger und Bremssättel werden vom VAG Konzern direkt nicht mehr hergestellt und sind gebraucht in gutem Zustand nur noch schwer zu bekommen.Somit hast du hier die optimale Lösung als Austauschteil für deine 288x25mm Bremsanlage am Audi A3, TT, VW Golf 4 uvm. Modellen. OE Vergleichsnummern: Bremssattelhalter: 3B0 615 125, 3B0615125 Bremssattel: 3A0 615 123 passend an folgenden Fahrzeugen: Audi A3 Audi TT VW Bora VW Bora Variant VW Golf 4 VW Golf 4 Variant VW New Beetle VW Passat VW Passat Variant technische Daten Einbauseite: Vorderachse für Bremsscheiben-Ø: 288 mm Kolben-Ø: 54 mm für Bremssystem: ATE Lieferumfang: 2x Satz Bremssattelhalter und Bremssattelträger für die Vorderachse des Audi A3, TT, Golf 3, Golf 4 uvm. Modellen mit der 288x25mm Bremsscheibe

€221.47*

2x Bremssattelträger Bremssattelhalter VW Golf 4 Bora Audi A3 8L Umbau 312x25mm Bremse vorne

Zwei neue Bremssattelträger und Bremssättel für die 312x25mm Bremsanlage an der Vorderachse des Audi A3, TT, VW Golf 4 uvm. Modellen.Die Bremssattelträger und Bremssättel werden vom VAG Konzern direkt nicht mehr hergestellt und sind gebraucht in gutem Zustand nur noch schwer zu bekommen.Somit hast du hier die optimale Lösung als Austauschteil für deine 312x25mm Bremsanlage am Audi A3, TT, VW Golf 4 uvm. Modellen. OE Vergleichsnummern: Bremssattelhalter: 3B0 615 125, 3B0615125 Bremssattel: 3A0 615 123 passend für folgende Fahrzeuge: VW Golf 4 VW Bora Audi A3 8L technische Daten Einbauseite: Vorderachse für Bremsscheiben-Ø: 312x25mm Kolben-Ø: 54 mm für Bremssystem: ATE Lieferumfang: 2x Satz Bremssattelhalter und Bremssattelträger für die Vorderachse des Audi A3, TT, Golf 3, Golf 4 uvm. Modellen mit der 312x25mm Bremsscheibe

€221.47*

KW Gewindefahrwerk V3 Audi S3 8L Golf 4 R32 Audi TT Seat Leon Quattro Gewindefahrwerk höhenverstellbar

Das höhenverstellbare KW Gewindefahrwerk V3 ist ein absolutes Muss für jeden sportlichen Fahrer. Durch die individuelle Höhenververstellung ist es möglich das Fahrzeug individuell auf deine Ansprüche anzupassen. Das Verstellelement sitzt unterhalb der Feder. Im Vergleich zu herkömmlichen Sportfahrwerken mit fester Tieferlegung kann das Fahrzeug optimal in Optik und Fahrdynamik auf deine Ansprüche angepasst werden. passend für folgende Fahrzeuge Audi S3 8L Audi TT Golf 4 R32 Seat Leon Cupra R New Beetle Skoda Octavia Vorteile: Tieferlegung Vorderachse 10-40 Tieferlegung Hinterachse 10-35 Optik und Fahrdynamik kann individuell auf deine Ansprüche angepasst werden Die Neigung bei sportlichen Fahren, auch in Kurven, wird minimiert bessere Straßenlage und Optik durch tiefen Schwerpunkt im eingebauten Zustand stufenlos höhenverstellbar an Vorder- und Hinterachse Lieferumfang: 1x höhenverstellbares KW Gewindefahrwerk V3 inox komplett für die Vorder und Hinterachse vom Golf 4 R32, Audi TT, Audi S3 uvm. Teilegutachten Einbauanleitung

€1,858.42* €1,915.90* (3% saved)

Germany	€0.00
United Kingdom	€22.31
Austria	€18.21
France	€18.21
Switzerland	€24.45
Italy	€17.55
Spain	€17.55
Andorra	€17.55
Arab Emirates	€51.63
Afghanistan	€51.63
Antigua and Barbuda	€63.02
Anguilla	€63.02
Albania	€24.67
Armenia	€51.63
Niederländische Antillen	€63.02
Angola	€63.02
Antarctica	€17.55
Argentina	€63.02
American Samoa	€63.02
Australia	€63.02
Aruba	€63.02
Åland Islands	€17.55
Azerbaijan	€51.63
Bosnia and Herzegovina	€24.67
Barbados	€63.02
Bangladesh	€51.63
Belgium	€18.21
Burkina Faso	€63.02
Bulgaria	€18.46
Bahrain	€51.63
Burundi	€63.02
Benin	€63.02
Saint Barthélemy	€17.55
Bermuda	€63.02
Brunei Darussalam	€51.63
Bolivia (Plurinational State of)	€63.02
Bonaire, Sint Eustatius and Saba	€63.02
Brazil	€63.02
Bahamas	€63.02
Bhutan	€51.63

Original VW Audi Golf 4 A3 8L Quattro 4Motion Suspension Control Arm Wishbone Rear Axke Bushing Track Adjustement

Suitable for the following vehicles:

Delivery:

Login