Opel Corsa Tigra AB Brake Caliper Adapter Rear Axle Conversion
- ✓ 260x10 Astra F / Kadett E / Vectra A brake disc
- ✓ 1-piston BHN110E Astra F / Kadett E / Vectra A brake caliper
- ✓ rear axle
Adapter für den Umbau auf Scheibenbremsen an der Hinterachse passend für Corsa A B und Tigra.
Benötigte Komponenten:
- Bremssättel vom Astra F / Kadett E / Vectra A Herstellernummer: BHN111E / paarige Art.Nr. BHN110E
- Bremsscheiben, sowie Handbremsseil vom Astra F / Kadett E / Vectra A
Funktionsbeschreibung:
Die Platten werden an die Original Corsa bzw. Tigra Hinterachse geschweißt, somit kann die komplette Astra Kadett Vectra Scheibenbremsanlage der Hinterachse verbaut werden. Eine Einbauanleitung mit Bilder wird mitgeliefert.
Lieferumfang:
- Einbauanleitung
- 2x Adapter
- 2x Handbremsbleche
- Materialzertifikat
Tips, information and hints:
- For a better ventilation of the brake system, we recommend removing the dust cover plates and brake anchor plates.
- We can not answer generally, which rim size you can mount after your brake conversion. There are simply too many different rims.
- In rare cases it is possible that the rims touch minimal the brake caliper, then you can simply use spacers.
>> Now directly to spacers << - Install the adapter with the necessary components and then check if new brake lines are required. Because, depending on the vehicle, the lines may be too short or the line tips may not suitable. We advise you to change to steel braided brake line because of the quality and technical advantage. Specifically for this, we have developed an online brake line configurator, where you can assemble the type of steel braided brake lines you want.
Click here to go to the >> configure steel braided brake lines << - Always use the hand brake cable of the installed brake caliper. So sometimes you have to modify / adapt the new handbrake cable. For conversions, where the original caliper is used and the handbrake cable can be used, you may need to pull the cable without any other fittings (ie directly) to compensate for the long distance due to the large diameter of the large brake discs.
Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.
Technical data:
Login
19 June 2019 10:59
BARRILLIET D
I soldered it, good quality, good look, no problem.
19 June 2019 13:20
ERWAN G
Produit de bonne facture manque juste plus de précision sur le plan de montage
- Can I also use other brake discs as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems
- Can I also use other brake calipers as specified in the required components?
No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: