Gesucht nach Audi | A4 Avant | 3.0 quattro | 8E5, B6
- ✓ bushing / bush / sleeve for the wishbone multi-link axle, tension strut, made of high-strength steel for the Audi A4 A6, VW Passat, Skoda Superb series
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ wheel hubs for conversion to 5x112 bolt / pitch circle for the rear axle
- ✓ suitable for Audi A4 B5 Quattro
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
Lane enlargement of 3mm on each wheel and 6mm on each axle. Tailor-made for all vehicles with 5x112mm bolt circle.
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ Zimmermann brake disc 288x25 Manufacturer's ref. no.: 100.1216.52
- ✓ Audi A4 1.8 T quattro TDI VW Passat 1.9 TDI V6 Seat Skoda
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ for front axle: Audi A4 S4 RS4 B6 B7 E8, Seat Exeo
- ✓ brake caliper: 6 piston brake caliper from Mercedes C63 AMG W204, reference Brembo: 20A495.03, original reference.: A204 421 201
- ✓ 2-parts brake disc: Mercedes AMG c63 W204 390X36mm, reference 09.9313.33, converted with the cover of the brake discs from RS4 B7
- ✓ The covers from the Audi RS4 B7 can simply be screwed onto the Mercedes brake disc
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
Hexagonal coupling nut M8x30
Thread right
Galvanized
- ✓ Installation location: front
- ✓ suitable for Lancia, Alfa, Bugatti, Chrysler, Ford
- ✓ for Audi A4 S4 quattro, Seat Exeo 1.8 T, etc.
- ✓ reinforced control arm / suspension / wishbone Kit, complete with steering bars and track rod ends,
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ Zimmermann sports brake disc 300x22 Manufacturer's ref.: 100.3316.20
- ✓ Audi A4 Avant Cabriolet 3.0 quattro TDI TFSI
- ✓ Zimmermann Brake Disc 300x22 Manufacturer Number 100.3316.52
- ✓ Audi A4 3.0 quattro TDI TFSI
- ✓ Zimmermann brake disc 312x25 manufacturer's ref. no.: 100.1242.52
- ✓ Audi A4 1.8 T quattro 2.5 TDI Seat
Cylinder head screw with hexagon socket high-strength
Size: M08x75
Surface galvanized
Quality 10.9
Hexagonal countersunk socket screw high resistance
Type: M10x25
Blank
Class 10.9
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ Continuous steering lock limiter / steering stop limiter made of stainless steel, suitable for all vehicles
- ✓ DIN DIN933
- ✓ size: M5-M16
- ✓ length 10-120mm
- ✓ high-strength
- ✓ steering angle limiter / turning angle reducer