Gesucht nach BMW | 3er | 328i | E46
Complete kit of repair plates for the support of the rear axle on the body of BMW E46 revealing cracks.
- ✓ intake manifold conversion kit on BMW E36 2.8i models to install a manifold of BMW M50 M52 models.
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ sensor adapter for oil pressure switch. Suitable for several engines BMW M50 M52 S50 S52, on models E34 E36 E39 E46 E38 Z3
- ✓ rear axle adjustment to be able to fix the toe-in perfectly on all BMW E36 E46 and Z4
- ✓ for front axle: BMW E46 / E85 / Z4
- ✓ brake caliper: for 135i reference 34 11 6 786 741
- ✓ brake disc: for BMW E45 M3 reference 3411 2 282 445
- ✓ clutch pin / clutch locking pin made of brass for all common BMW models such as e.g. E30 E46 E81 E88 and much more
- ✓ hollow screw / banjo screw adapter for oil cooler connection M50/52 on BMW E36 E39 Z3 models
- ✓ reinforcing / repair plates for chassis and axle support / beam on all models BMW E46
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ rubber bushes for BMW E36 E46 and Z1 camber adjustable rear axle
- ✓ rubber bushings bushings already pressed in / ready to use
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ 1x clutch release lever / fork for BMW series 3 E46 E90
- ✓ reinforced aluminium axle bearing for the rear axle on models BMW E46 and Z4 E85 E86
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for e.g. VW BMW E36 E30 Z3 etc.
- ✓ Connection 1 M10x1 external thread 45° bent
- ✓ Connection 2 M10x1 female thread straight
- ✓ Length 60cm long / Transparent sheathed Syncro
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ eccentric for article 590 galvanized
Hexagonal nut M08
Thread right
Galvanized
- ✓ eccentric for article 244, galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ for rear axle: BMW E46
- ✓ brake disc: rear BMW E46 M3, 328x20mm, reference 34212282303 oder 34212282304
- ✓ brake caliper: Porsche 986, reference 986.352.421 / 986.352.422, or reference 996.352.421 / 996.352.422
- ✓ drift spacer / steering lock spacer in oder to increase steering angle on models BMW E30 E36 E46 Z1 Z3
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ high-quality wheel / lug nuts with cone collar 60° M14x1.5 with the best rust protection
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread