Gesucht nach Audi | 80 Avant | 2.0 E 16V quattro | 8C, B4
Hexagonal socket head cap screw high resistance entirely thread
Type: M12x30
Thread 1.5
Blank
Quality: 12.9
- ✓ Repair sheet plate for shock absorbers, spring or axle suspension rear for Audi RS4 S4 RS2 S2 A4
- ✓ for front axle: Audi 80 S2 B4
- ✓ brake caliper: Porsche Cayenne ZR18 ZL18 , reference 95535142153 / 95535142253
- ✓ brake pads: reference 4L0 698 151 A
- ✓ brake disc: VW Phaeton 360x34 mm , reference 3D0 615 301 M
- ✓ engine mounting bracket to install the 1.8T engine (AEB) from the Audi A4 B5, Audi A6, VW Passat 3B in the Audi 80 B4
- ✓ for front axle: for Audi 80, 90, S2, etc.
- ✓ Porsche 993 Big Red brake calipers part no: 993.351.425 / 993.351.426
- ✓ Brake pads part number: 92835194002
- ✓ Brake discs from Audi A8 in 323x30 OE numbers: 4D0 615 301A
- ✓ Wheel hub from Audi S2 with 5x112 must be installed ( also available in our store. Part number: 46859 click here)
- ✓ wheel hubs for conversion to 5x112 bolt circle/ pitch diameter circle (pdc) - front axle
- ✓ suitable for Audi 80 / 90. Series with an 82 wheel bearing diameter
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ bottom length: 30mm
- ✓ top length: 21mm
- ✓ width: 24mm
- ✓ for front axle: Audi 80, 90, S2, etc.
- ✓ brake caliper: VW Touareg 7L V6 BM5 Brembo 4-piston, reference 7L6 615 123 R / 7L6 615 149 A Brembo: 209236062A / 209236051A
- ✓ brake disc: Audi S8 345x30mm, reference 4D0 615 301 B
- ✓ the wheel hub of the Audi S2 with 5x112 must be installed (also available in our shop. Item number: 46859)
- ✓ for front axle: Audi S2, Audi 80 / 90
- ✓ brake caliper: Audi RS3 / TTRS, reference left 8J0 615 107 / right 8J0 615 108
- ✓ brake disc: Audi S8 in 345x30, reference: 4D0615301B
- ✓ high quality wheel bolts with serrated schoulder / knurled stubs, M14x1,5 60mm long, best anti-corrosive protection
- ✓ for front axle: AUDI S2
- ✓ brake caliper: Audi RS3 , reference : left 8J0 615 107 + right 8J0 615 108
- ✓ brake disc: Audi A8 323x30 OE-reference 24.0130-0183.1
- ✓ 1x bent curved fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 7m
- ✓ bottom length: 20mm
- ✓ top length: 23mm
- ✓ width: 18mm
- ✓ Steering knuckle, wheel bearing housing (1x left and 1x right) for the front axle of the VW Golf 1, Jetta 1, Scirocco and Caddy 14D
Brake caliper adapter for front axle brake system to fix brake discs typ Audi A8 diameter 360mm
in combination with big brake calipers from Porsche 996 Turbo GT3 on Audi/VW vehicles.
- ✓ 1x tension pulley for VW Golf MK1 MK2 MK3 Audi A6 Seat Toledo 1,8 2,0 16V
- ✓ eccentric for article 590 galvanized
- ✓ heat-resistant EPYTEC sticker for front axle brake caliper, 4-piston 6-piston
Hexagonal nut M08
Thread right
Galvanized
- ✓ 2x drive shaft adapters for VW Golf MK1
- ✓ for Audi 80 S2 Quattro, Coupe 2.3 20V, etc.
- ✓ eccentric for article 244, galvanized
- ✓ for front axle of Audi S2, Audi 80
- ✓ brake caliper: Porsche 996/GT3
- ✓ brake disc: Audi S8 345x30mm
- ✓ spacing plate / bush / bushing for brake caliper adapter
- ✓ hexagon nut: M10
- ✓ thread: right
- ✓ material: stainless steel
- ✓ 1x retaining ring / supporting ring Grommet made of rubber for braided steel brake line
- ✓ EBC brake disc 334x32 Manufacturer number: GD1153 with bolt circle 4x100 and 5x100 suitable for our brake caliper adapters Article 266
- ✓ Golf 4 R32
- ✓ Zimmermann brake disc 370x32 Manufacturer's ref. 100.3367.70 with bolt circle 5x100 and 5x112 suitable for our brake caliper adapter article 742
- ✓ Audi TT
- ✓ Seat Leon
- ✓ complete brake system for rear axle: all four-wheel drive Golf 4 Bora Vento Audi A3 series
- ✓ Porsche Cayenne brake callipers part number: 955.352.421/ 955.352.422
- ✓ original brake calipers with carrier for handbrake from Golf 4 R32
- ✓ Brake disc 310x22 rear from VW Phaeton Manufacturer No.: 3D0 615 601 D
- ✓ Zimmermann brake disc 330x32 Manufacturer's code: 400.3673.52 with drilled hub bore to 68mm, suitable for our brake caliper adapter article 868
- ✓ Mercedes Benz E Class W210, S210, SLK CLK, Chrysler Crossfire
- ✓ 1x inner joint with 108mm diameter and matching gaiter, including fixation material
Hexagonal coupling nut M8x30
Thread right
Galvanized
Hexagon nut self-locking M12
Ring non metallic (plastic)
Thread right
Galvanized
Zinc-plated press-in nut M06 with right hand thread
Hexagon thin nut M08
Thread left
Galvanized
- ✓ for front axle: Audi 80, 90, S2, etc.
- ✓ brake caliper: Audi 4-piston Audi S8 D2, reference 4D0615107D | 4D0615108D
- ✓ brake disc: Audi S8 345x30mm, reference 4D0615301B
- ✓ 1x straight fixation for steel braided brake line with rubber
- ✓ top hole: 8mm
- ✓ bottom hole 11m
- ✓ Width: 24mm
- ✓ Height: 47mm