You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT
Go to homepage
tuev sued logo
Made in germany
Shopping cart €0.00*

Modellwahl

#1
#2
#3
#5
Overview

Vehicle key number

Show all categories Wheel hubs Back

Audi S2 Coupe 80 90 Avant 80 Quattro Wheel Hub with 5x112 Bolt Circle/ Pitch Diameter Circle Front Axle

Audi S2 Coupe 80 90 Avant 80 Quattro Wheel Hub with 5x112 Bolt Circle/ Pitch Diameter Circle Front Axle
Audi S2 Coupe 80 90 Avant 80 Quattro Wheel Hub with 5x112 Bolt Circle/ Pitch Diameter Circle Front Axle
Audi S2 Coupe 80 90 Avant 80 Quattro Wheel Hub with 5x112 Bolt Circle/ Pitch Diameter Circle Front Axle
Audi S2 Coupe 80 90 Avant 80 Quattro Wheel Hub with 5x112 Bolt Circle/ Pitch Diameter Circle Front Axle

€174.10*

Prices incl. VAT plus shipping costs

6 Reviews
Available again on 09.08.2024
Delivery by Friday, 09.08.2024 if you order within the next 15 Hours.
Product number: APA185
Weight: 5 kg
Einbauort: vorne
Lochkreis: 5x112mm

Wheel hubs for conversion to 5x112 bolt circle/ pitch diameter circle (pdc) - front axle on models Audi 80 / 90. Series with an 82 wheel bearing diameter at the front axle, combined with the Audi S2 brake. 

The wheel hubs can be installed plug and play on your Audi 80/90 series and you can also take over the Audi S2 brake directly without an adapter or anything else.. 

Since it is impossible to re-drill the original wheel hub (overall diameter too small), we have included these special wheel hubs in our shop. Now rims with 5x112 bolt circle can finally be used without to need for adapter plates.

Also perfectly suitable for all Audi 80 S2 as a spare part, since the hubs are neither offered by Audi nor in the accessories.

Advantages: 

  • 5x112 rims can be used without the installation of plates or spacers
  • 100% fitting 
  • completely galvanized, therefore best corrosion protection
  • The 5x112mm wheel hubs are equipped with M14x1.5 thread. So the Audi and VW rims can be taken over with the original wheel bolts
  • not permitted under the STVO (German Road Licensing Law). However, thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles

Delivery:

  • 2x whell hubs, 5 x 112 bolt circle/ pitch diameter circle, M14x1,5 thread, suitable for Audi 80 / 90. Series with an 82 wheel bearing diameter
  • material certificate

Please note that our articles have been designed for racing and motorsport. Use in public road traffic usually requires an individual approval in accordance with § 21 StVZO by an officially recognised expert. Further information can be found under TÜV Süd. For the individual approval, we will provide you with an expert opinion or material certificate, if available.

Einbauort: vorne
Lochkreis: 5x112mm

6 of 6 reviews

5 out of 5 stars

100%

0%

0%

0%

0%

Leave a review!

Share your experiences with other customers.

18 February 2022 09:14

Swen Joachim V

Schnelle unkomplizierte Abwickulung. Sehr schnelle Liefrung bei verfügbaren Artikeln. Passgenaue Montage am Fahrzeug. Positive Erfahrungen aus den letzten Käufen! Produktpalette für Motor/Getriebhalterung erweitern (Motor-Swap)

29 November 2020 19:37

Sébastien L

Montage sinople et comme à l origine. Cest top !

15 November 2020 09:50

Sébastien L

Montage simple et plug and play sur une Audi 80 cab v6 Aucune modification à part les freins

15 April 2020 20:59

Thomas S

Sehr gute Qualität und passgenau. Evtl. Höhere Stärke für Rally Fahrzeuge wäre wünschenswert.

8 March 2020 09:52

Swen Joachim V

Super Qualität, ich hätte mir nur gewünscht, dass das Materialzertifikat gleich dabei gewesen wäre. Aber sonst reibungsloser Ablauf, sehr zufrieden. Gruß S-J. Vöge

9 February 2020 09:10

Kinnen M

Wass soll mann Sagen Passt 👍

  • Can I also use other brake calipers as specified in the required components?

  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information:

  • Can I also use other brake discs as specified in the required components?

  • No, unfortunately that is not possible. The reason is simply: all brake calipers have different heights and depths. If another brake disc is installed, the brake caliper would either not fit on the adapter or not run in the middle of the brake disc. But if you want to install a different brake caliper, we also have an option for you. You can have a custom-made product made for you, take a look at the following link for more information: https://epytec.de/uk/custom-made-products/brake-technology/adapters-for-brake-systems

Passendes Zubehör

Audi 80 90 S2 brake caliper adapter Porsche 996 brake caliper Audi A8 brake disc 360x34 conversion brake system
Audi 80 90 S2 brake caliper adapter Porsche 996 brake caliper Audi A8 brake disc 360x34 conversion brake system
Brake caliper adapter to mount the large Porsche 996 Turbo GT3 4-piston brake calipers in connection with the Audi A8 brake disc 360x34mm on the Audi S2 and Audi 80 / 90, with original 5x112 or 5x112 bolt circle conversions. Components: Porsche caliper 996Turbo/GT3 parts NR: 996.351.429 and 430 Audi A8 brake discs (4E0615301 A) 360x34mm Zimmermann part no. 100.3305.50 Wheel hub from the Audi S2 with 5x112 must be installed (also available in our shop. Item number: 46859) Advantages: Significantly better perfomance than the standard brake system. Adaptor does not require rectications on your vehicle,therefore easily transformable in its original condition Our brake adapters do not require the sending in of their serial parts, no re-welding - re-milling or re-drilling The material certificate included in the scope of delivery enables entry by individual acceptance even for series vehicles We also offer a suitable conversion for the rear axle, see our shop Item is not in stock and will be produced for you after you place your order. Scope of delivery: 2x brake caliper adapters for Audi 80, 90, S2, etc Set of high-strength screws materials certificate Copy of the vehicle registration document stress analysis

€233.08*
Audi S2 80 90 RS2 Brake Caliper Adapter 345x30 S8 Brake Disc Brake System
Audi S2 80 90 RS2 Brake Caliper Adapter 345x30 S8 Brake Disc Brake System
Brake caliper adapter  for front axle on Audi S2 Audi 80/90 with original 5x112 or 5x112 bolt circle conversions,  for conversion to brake caliper of Audi RS2, combined with the brake discs of Audi S8 345x30. Suitable for the following vehicles: Audi S2 Audi 80 Audi 90 Advantages: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Required components: brake caliper: Audi RS2   reference  8A0 615 106 k brake disc: Audi S8 345x30mm  reference  4D0 615 301 B Scope of Delivery: 2x brake caliper adapters for Audi 80, 90, S2 ect material certificate

€448.21*
Audi 80 90 S2 brake caliper adapter Audi A8 brake disc 323x30 RS3 brake calipers tuning adapter
Audi 80 90 S2 brake caliper adapter Audi A8 brake disc 323x30 RS3 brake calipers tuning adapter
Brake caliper adapter to mount the Audi RS3 brake calipers in conjunction with the 323x30 brake discs from the Audi A8, on the Audi S2 and Audi 80 / 90, with original 5x112 or 5x112 bolt circle conversions. The standard Audi PCD can be maintained. Furthermore, 16 inch rims can be maintained with this brake system. Required components: brake caliper: Audi RS3 , reference : left 8J0 615 107 + right 8J0 615 108 brake disc: Audi A8 323x30 OE-reference 24.0130-0183.1  Wheel hub from the Audi S2 with 5x112 must be installed (also available in our shop. Item number: 46859) Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling quick and easy assembly Our adapters are supplied galvanized, anti-corrosive according to DIN ISO 9227 Delivery: 2x brake caliper adapters (see picture) Stress analysis matching set of screws material certificate

€334.42*
Audi S2 80 90 Brake Caliper Adapter Big Red 993 Brake Calipers 323x30 Audi A8 Brake Disc Tuning Adapter
Audi S2 80 90 Brake Caliper Adapter Big Red 993 Brake Calipers 323x30 Audi A8 Brake Disc Tuning Adapter
Brake caliper adapter to mount the Porsche Big Red 993 calipers in conjunction with the large brake discs in 323x30 from the Audi A8 on the Audi S2, Audi 80 / 90, with original 5 x112 or 5x112 bolt circle conversions.The standard Audi bolt circle can be retained. Thus, the complex and costly 5x130 mm Porsche bolt circle conversion is not required. Furthermore, 16 inch rims can be driven with this brake system Required components: Porsche 993 Big Red Brake Calipers Part No: 993.351.425 / 993.351.426 Brake pads part number: 92835194002 Brake discs from Audi A8 in 323x30 OE numbers: 4D0 615 301A Wheel hub from Audi S2 with 5x112 must be installed (also available in our store. Part number: APA185 click here) Important: Our brake caliper adapters only fit with the specified components, please be sure to use them exactly. Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems Our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling quick and easy assembly anticorrosiv according to DIN ISO 9227 Delivery: 2x brake caliper adapters (see pictures) suitable high-strength screw set material certificate copy of vehicle documents to simplify the registration Stress analysis / FEM calculation for entry

€184.44*
Audi 80 S2 Brake Caliper Adapter ZR18 Cayenne Brake Caliper Audi A6 VW Phaeton 360x34 Brake Disc Conversion Tuning
Audi 80 S2 Brake Caliper Adapter ZR18 Cayenne Brake Caliper Audi A6 VW Phaeton 360x34 Brake Disc Conversion Tuning
Brake caliper adapter on model Audi 80 S2 B4 for conversion to the die  Porsche or Brembo 6-piston brake caliper ZR18, combined with the Audi A6 or VW Phaeton brake disc 360 x 34mm. The calipers were installed on the Porsche Cayenne, VW Touareg and Q7. Required components: brake caliper: Porsche Cayenne ZR18 ZL18 , reference 95535142153 / 95535142253 brake pads: reference  4L0 698 151 A brake disc: VW Phaeton 360x34 mm , reference 3D0 615 301 M The wheel hub of the Audi S2 with 5x112 must be installed (also available in our shop. Item number: 46859) Delivery: 2x brake caliper adapters for Audi 80 S2 1x complete set of high-strength screws Template to check whether the brake system fits under your rim 1x material certificate

€160.97*
Audi 80 90 S2 Brake Caliper Adapter VW Touareg BM5 Brake Caliper Audi A6 A8 345x30 Brake Disc Conversion
Audi 80 90 S2 Brake Caliper Adapter VW Touareg BM5 Brake Caliper Audi A6 A8 345x30 Brake Disc Conversion
Brake caliper adaper, front axle, on models Audi S2 und Audi 80 / 90, for conversion to the brake calipers of VW Toureg 7L V6 Brrmbo BM5 4-piston, combined with the Audi S8 brake discs 345x30mm, with original 5 x112 oder 5x112 Pitch Circle Diameter to modify. Required components brake caliper: VW Touareg 7L V6 BM5 Brembo 4-piston, reference 7L6 615 123 R / 7L6 615 149 A Brembo:  209236062A / 209236051A  brake disc: Audi S8 345x30mm, reference 4D0 615 301 B the wheel hub of the Audi S2 with 5x112 must be installed (also available in our shop. Item number: 46859) Advantages: significantly better deceleration values than the undersized original brake system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling We also propose you a suitable conversion for the rear axle - look in our shop. Delivery: 2x brake caliper adapters for  Audi 80, 90, S2, etc complete screw kit material certificate Stress analysis / FEM calculation for entry

€165.35*
2x VW Golf 4 Bora New Beetle Polo Audi S3 8L TT Seat Ibiza Leon 312x25mm Bremsscheiben mit 5x112 Lochkreis
2x VW Golf 4 Bora New Beetle Polo Audi S3 8L TT Seat Ibiza Leon 312x25mm Bremsscheiben mit 5x112 Lochkreis
Original VW Golf 4 Bora New Beetle Polo Audi S3 8L TT Seat Ibiza Leon 312x25mm brake discs with 5x112 bolt circle. The brake discs are identical to the original discs, only the hole circle of the brake discs is 5x112. So you don't need to drill the brake discs if you want to drive rims with a 5x112 bolt circle. The brake discs are also compatible with many brake caliper adapters and wheel hubs with a bolt circle of 5x112 (see matching accessories). Suitable for the following VW and Audi models: Audi A3 8L Audi TT 8N VW Bora VW Golf 4 VW New Beetle Skoda Octavia Seat Leon Seat Ibiza and much more Original part number of the identical brake disc in 5x100: 8N0 615 301 A delivery: 2x 312x25mm brake discs with 5x112 bolt circle suitable for VW Golf 4 Bora New Beetle Polo Audi S3 8L TT Seat Ibiza Leon and much more. material certificate

€170.59*
Brake Caliper Adapter Audi UR Quatrro Audi S4 Brake Disc 320x30 Brake Caliper Audi TTRS 4-piston Brake System Tuning Adapter
Brake Caliper Adapter Audi UR Quatrro Audi S4 Brake Disc 320x30 Brake Caliper Audi TTRS 4-piston Brake System Tuning Adapter
Brake caliper adapter on models the Audi UR-Quattro, for conversion to the Audi TTRS / RS3 Brembo 4-piston brake calipers, combined with the Audi 3.2 FSI Quattro 320 x 30mm brake disc.The brake calipers  were installed in the Audi TTRS 8J and Audi RS3 8J Suitable for the following vehicles: Audi 2.1 20V Turbo Audi 2.1 Turbo Audi 2.2 20V Turbo Audi 2.2 quattro Audi 2.2 Turbo Required components : brake caliper: l Audi TTRS / RS3 Brembo 4-piston reference 8J0 615 107 / 8J0 615 108 brake disc: Audi 3.2 FSI Quattro 320x30mm, reference 8E0615301AE Wheel hub conversion to 5x112 wheel hub from the Audi S2 Delivery : 2x brake caliper adapters for Audi UR-Quattro high-strength screw material material certificate

€364.18*
Audi 80 90 S2 Brake Caliper Adapter Audi S8 Brake Disc 345x30 TTRS RS3 Brake Caliper Tuning Adapter
Audi 80 90 S2 Brake Caliper Adapter Audi S8 Brake Disc 345x30 TTRS RS3 Brake Caliper Tuning Adapter
Brake caliper adapter, front axle, on models Audi S2 and Audi 80 / 90, for conversion to the  Audi RS3 / TTRS brake calipers, combined with the brake discs 345x30 Audi S8, with original 5x112 bolt / pitch circle or with 5x112 modification. Required components: brake caliper: Audi RS3 / TTRS, reference left 8J0 615 107 / right 8J0 615 108 brake disc: Audi S8 in 345x30, reference: 4D0615301B  wheel hub from the Audi S2 with 5x112 must be installed (also available in our shop. Item number: 46859) Advantages of this brake system: high deceleration, also in conjunction with our rear axle braking system thanks to the material certificate supplied with the order, it is possible to register your purchase even for series vehicles directly fit to the above-mentioned models and therefore can always be restored to the original state without any problems our EPYTEC brake caliper adapters do not require any sending of your serial parts, no welding, milling or drilling Adapters are delivered galvanized, best corrosion protection according to DIN ISO 9227. Delivery: 2x brake caliper adapters for Audi 80, 90, S2, etc. high-strength mounting screws material certificate

€204.53*
Engine Mounting Bracket Audi 80 B4 1.8T Conversion AEB Engine Audi A6 A4 VW Passat Engine Umbau
Engine Mounting Bracket Audi 80 B4 1.8T Conversion AEB Engine Audi A6 A4 VW Passat Engine Umbau
Engine mounting bracket to install the 1.8T engine (AEB) from the Audi A4 B5, Audi A6, VW Passat 3B in the Audi 80 B4 Suitable for all Audi 80 that have the original 4 or 5 cylinder engines installed With our engine mounting bracket you can easily rebuild the engien and save a lot of time. Due to the stable construction and the accuracy of adjustment, the bracket set can be fixed to the original holder/support, which means that an absolute fit of the transmission can be guaranteed. No welding on the body is necessary, which saves a lot of time when converting your vehicle.The engine and gearbox mounting brackets are supplied galvanized, which provides the best protection against corrosion. Delivery: 1x engine mounting bracket to install the 1.8T engine from Audi A4 B5, Audi A6, VW Passat 3B into the Audi 80 B4 

€131.59*
Bremsen Lochkreisumbau Audi 80 90 100 Avant 5x112 Hinterachse Fronttriebler Bremsensatz
Bremsen Lochkreisumbau Audi 80 90 100 Avant 5x112 Hinterachse Fronttriebler Bremsensatz
Wer endlich 5x112 Felgen fahren will und die hintere Bremsanlage mit den 245x10mm Bremsscheiben beim Audi 80, Audi 90, Audi uvm. original belassen will, ist hier genau richtig.Mit diesem kompletten Umbausatz für die Hinterachse kannst du nun endlich 5x112 Felgen an deinem Audi 80, Audi 90, Audi uvm. verbauen. Das ist wohl die beste Alternative zu unseren Lochkreisadaptern, da hiermit die Spur nicht verbreitert wird. Vorteile:  keine Lochkreisadapter notwendig Plug & Play zu verwenden, kein Umbohren der Bremsscheiben notwendig, etc. Radkästen müssen nicht zwingend gezogen werden (natürlich je nach verbauter Felgenbreite) Wie die Originalbremsscheiben nur mit 5x112 Lochkreis: OE Teilenummer der hinteren Bremsscheibe mit original 4x108 Lochkreis: 443615601, 92026100, 443615601, 443615601, 443615601 Passend für folgende Audi Hinterachse (Frontantrieb): Audi 100 Audi 100 Avant Audi 80 Audi 80 Avant Audi 90 Audi Cabriolet Audi Coupe technische Daten:  Einbauseite: Hinterachse Bremsscheibenart: Voll Außendurchmesser: 245 mm Bremsscheibendicke: 10 mm Mindestdicke: 8 mm Höhe: 83,6 mm Innendurchmesser: 135,5 mm Lochanzahl: 5 Lochkreis-Ø: 112 mm Zentrierungsdurchmesser: 45,2 mm Gewindemaß: M14x1,5 Ergänzungsartikel/Ergänzende Info 2: mit Lager Ergänzungsartikel/Ergänzende Info 2: mit ABS-Sensorring Bremssystem: Lucas / TRW Breite: 87,6 mm Bremsscheibendicke: 17,2 mm Lieferumfang: komplettes Umbaukit für Hinterachse am Audi 80 90 100 Avant Cabriolet uvm.

€126.73*
You can find out everything about your order via your -> View customer account
Simple registration for the technical inspection
test
QUALITY MADE IN GERMANY
DIRECT FROM THE MANUFACTURER
WORLD'S NR.1 TUNING ADAPTER
15 YEARS OF EXPERT KNOWLEDGE
FREEDOM: INSTALL WHAT YOU WANT